Kogan KAMN27LSC User manual

Table of contents

Other Kogan Monitor manuals

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

27" FULL HD FREESYNC

75HZ FRAMELESS MONITOR

(1920 x 1080)

KAMN27LSC

•Read all instructions before using the appliance and retain for reference.

•Unplug the monitor before cleaning it.

•Use a clean, slightly dampened cloth to wipe the main monitor body.

•To clean the screen: turn it off, unplug it and wait for it to cool completely, then

wipe it with a dry micro-fibre cloth.

•Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.

•This monitor is designed with ventilation holes on the back of the casing. Do not

cover or block them.

•Do not insert any object or spray any liquid into the vents.

•Avoid placing the monitor near heaters, stoves, fireplaces, or other sources of heat,

as well as in rooms lacking adequate ventilation.

•Do not position the monitor in unsafe locations. If the monitor falls, it may be

damaged and may injure nearby people.

•Unplug the monitor if it is not going to be used for an extended period.

•Do not place heavy objects on the monitor, its power cord, or any connected cable.

•Do not open the back panel of the monitor, as it contains a high-voltage current

even when not plugged in.

The terms HDMI and HDMI High-Definition Multimedia Interface

and the HDMI Logos are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States and other

countries.

SAFETY & WARNINGS

Monitor

Stand connector

Stand base

VESA screws (x4)

HDMI cable

Power cable

User guide

COMPONENTS

;

Monitor Controls

1

Menu button

Press to display the OSD menu or enter sub-menus.

2

Down button

Press to move down in the menu.

3

Up button

Press to move up in the menu.

4

Exit button

Press to exit.

5

Power button

Press to turn the monitor on/off.

Monitor Ports

6

Power connector

7

Audio In

8

VGA connector

9

HDMI connector

OVERVIEW

1. Carefully remove the monitor from the packaging with foam attached and place it

face down on a soft cloth spread across a stable surface such as a table.

2. Remove and assemble the stand base and connector.

STAND ASSEMBLY

ATTENTION: Panel is fragile. Keep the foam underneath the monitor

while assembling the stand.

3. Remove the connection block from the back of the monitor by pressing the detach

button.

4. Insert the connection block into the back of the monitor, then push down until it

snaps into place.

5. Remove the bottom foam and place the monitor on the desk or other location

intended for use. Installation is complete.

Connection block

Open

Close

1. Open the box, take out the monitor with protection form attached and gently place it

on a desktop or table. Remove the extra parts and the foam covering the back of the

monitor. Press the release button to remove the stand plate. If the monitor was already

attached to the stand, remove the stand.

2. Assemble the mount as per the instructions provided with the mount.

VESA MOUNT

Stand

stem

Monitor

Foam

Stand plate

Stand base

Mount (not included)

Note:

VESA mounting pattern 75x75mm, screw size M4.

VESA mount or mounting accessories are NOT included.

Power cable

Connect the included power cable to the monitor power port and then connect the other

end to a power outlet.

Audio In

Connect an audio cable to the 3.5mm audio port on the monitor (Audio In) and the 3.5mm

audio port on your computer.

CONNECTIVITY

HDMI

Connect an HDMI cable from the computer’s display output to the monitor’s display input.

VGA

Connect a VGA cable from the computer’s display output to the monitor’s display input.