Kogan VIPER-X User manual
VIPER-X DRONE WITH VR
HEADSET
KAVIPRDRONA
Read all instructions in this guide before using this product. Retain this guide for future
reference. Do not skip, substitute or modify any steps or procedures in this guide, doing so
may result in personal injury or product damage.
Important Notes
• Do not attempt to touch the drone whilst it is operating under any circumstances.
• This product is not a toy and can be dangerous when used incorrectly. Please
follow all instructions while operating. Disassembling or modifying the drone
arbitrarily, operating improperly or being unfamiliar with this product may lead to an
accident and possible injuries.
• This product is intended for use by persons aged 14 years or older. It is
recommended that people between 14-18 years operate the drone under
supervision.
• Ensure the product is operated in a safe environment.
• It is recommended that you seek the assistance of an experienced drone pilot
before attempting to fly the drone for the first time. A local expert is the best way to
properly assemble, setup and fly your drone for the first time. It requires a certain
degree of skill to operate and is an item subject to normal wear and tear. Any
damage or dissatisfaction as a result of accidents or modifications are not covered
under warranty.
Safety Notes
• Always operate the drone in a safe environment. Do not operate drones within the
vicinity of people. Aircrafts are prone to accidents and failures when piloted
incorrectly. Pilots are responsible for their actions as well as any damage or injury
caused by pilot error and radio interference.
• This product is suitable for indoor and outdoor use. Always fly in a place clear of
obstacles and keep a safe distance from people and pets.
• Do not operate the drone in unsafe conditions and keep clear of heat sources, wires
or electric power sources.
• This product contains precision electrical components. Always keep this product
away from water and other liquids. Exposure to water or moisture in any form can
cause this product to malfunction resulting in a crash.
• To a v o i d a potential fire hazard, do not short, reverse polarity or puncture batteries.
Battery charging must be done under supervision and in a location out of reach of
children.
• Ensure that the orientation of the batteries is installed correctly based on polarity,
as indicated in the battery compartment. Do not mix batteries of different
chemistry/specification.
SAFETY & WARNINGS
• Remove the batteries if you are not going to use this product for an extended
period. Always dispose of old batteries according to your local environmental
authority.
• Li-Polymer batteries pose higher operational risks compared to other battery types,
thus it is imperative to follow its usage instructions.
• Avoid contact between the battery and metallic objects.
• If there is an increase in battery temperature after operation, cease use
immediately and allow it to cool down. Continuous use of this battery may cause it
to expand, deform, explode or result in potential fire hazards.
• Do not store this product near any sources of heat such as an oven or heater. It is
recommended to store indoors, in a cool, dry environment.
• Drones are not to be flown within 5km of airports. Many locations are considered no
fly zones and you must ensure that you fly in areas that align with your local laws
and ordinances.
• Please do not place heavy objects directly onto the drone or any of its components.
VR Headset
• Do not use the VR headset while the phone is charging.
• During use, if you feel dizzy or sick, take a break before continuing operation.
• Pregnant women, people with high blood-pressure and people with a fear of
heights should not use the VR headset.
Upper Body
Lower Body
Propellers (x4)
Protecting Frames (x4)
Landing Skids (x2)
Motor (x4)
LED Lights (x2)
Receiver Board
Battery
USB Charging Cable
Phone Holder
Remote Control
Camera
COMPONENTS
Remote Control:
OVERVIEW
Capture photo
Record video
Left control
lever
Accelerator
Speed trim
Return
Headless flight
Power switch
Antenna
Speed/gear
Roll
Right control
lever
Crab trim /
finetuning
Forward/
backward
finetuning
Indicator
VR Headset:
1
Focus slider
Adjusts the focal distance
2
IPD slider
Adjusts interpupillary distance (IPD)
3
Left headphone jack
Left hand side headphone input
4
Sliding panel
Slides to expose the phone’s camera
5
Phone holder
Open to insert phone into headset
6
Right headphone jack
Right hand side headphone input
1
2
3
4
5
6
2
Remote Battery Installation:
• Remove the battery compartment cover.
• Install x4 AA batteries (not included) into the battery compartment. Pay attention
to the orientation of the polarity symbols.
Drone:
• Install the 4 landing skids on the underside of the drone (Figure 1).
• Attach a protecting frame onto each corner of the drone and secure it in place
using the screws (Figure 2).
ASSEMBLY
Figure 1
Figure 2
x4 AA Batteries
Phone Holder Installation:
• Attach the phone holder to the remote control in the position shown (Figure 3).
• Secure the phone in place using the screw (Figure 4).
To a v o i d accidentally engaging the buttons on your mobile phone, you can install the
supplied rubber pads onto the phone holder.
Attach the rubber pads to the phone holder according to the position of your phone buttons.
(Figure 5).
Screw hole
Rubber pad
Phone buttons
Figure 3
Figure 4
Figure 5
VR Headset:
• Download the “Veer VR” app from the Play Store (Android) or App Store (iOS).
• In the VR app settings, switch to side-by-side mode.
• Slide open the phone holder and insert the phone into the VR headset.
This manual suits for next models
1
Table of contents
Other Kogan Drone manuals
