Koenig KBP40 User manual
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, explosion, electric shock, or
injury when using your ice maker, follow these
important safety instructions:
1. Before using check that the voltage power
corresponds to the one shown on the appliance
nameplate.
2. Do not remove any safety, warning, or product
information labels from your ice maker.
3. Plug the ice maker into an exclusive grounded power
outlet. No other appliance should be plugged into the
same outlet. Be sure that the plug is fully inserted into the
receptacle.
4. This appliance must be grounded. It is equipped with
a power cord having a grounding plug. The plug must be
plugged into an outlet that is properly installed and
grounded.
5. Avoid the use of an extension cord because it may
overheat and cause a risk of fire. However, if it is
necessary to use an extension cord:
1) Use only extension cord with grounding plug.
2) The marked rating of an extension cord must be
equal to or greater than the rating of this appliance.
6. It should be positioned such that it does not drape
over the counter or tabletop where it can be pulled on by
children intentionally.
7. Do not operate any appliance with a damage cord or
plug or after the appliance malfunction or has been
damaged in any manner. Return the appliance to the
nearest authorized service facility for examination, repair
or adjustment.
8. If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
9. Do not let cord hang over edge of table or counter.
10. Do not place on or near a hot gas or electric burner,
or in a heated oven.
11. Place power cord in such a way it cannot be pulled
on by children or cause a tripping hazard.
12. Place power cord in such a way that it is not in
contact with hot surfaces.
13. The use of attachment not recommended or sold by
manufacturer may cause fire, electric shock or injury.
14. Do not touch the evaporator when using the ice
maker or making ice to avoid being suffer from frostbite.
15. Do not immerse any part of the product in water.
16. To disconnect, turn any control to “OFF”, then remove
plug from wall outlet.
17. Do not plug or unplug product with wet hands.
18. Unplug the product before cleaning, maintaining and
when not in use.
19. Do not use with water that is microbiologically unsafe
or of unknown quality.
20. Do not clean your ice maker with any flammable
fluids. The fumes may create a fire hazard or explosion.
21. Do not overturn the ice maker. If the ice maker is
overturned accidentally, make it stand steadily for 2 hours
before power it on again.
22. If the ice maker is brought in from outside in
wintertime, do not use for a few hours, allowing the unit
to warm up to the room temperature before operating.
23. Never put flammable, explosive and corrosive
articles into the ice maker.
24. Never use the ice maker when there is flammable gas
leakage.
25. Never store or use gas and other flammable articles
near the ice maker to avoid any fire.
26. Unplug the ice maker before moving it to avoid
damaging the refrigerating system.
27. Do not attempt to disassemble, repair, modify, or
replace any part of your product.
28. This appliance may be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience or knowledge, provided that they are
supervised or instructed in the safe use of the appliance
and that they fully understand the potential hazards.
29. Children shall not play with the appliance.
30. Close supervision is necessary when any appliance is
used by or near children.
31. Do not leave the appliance unattended while in use.
32. Do not use outdoors.
33. Do not use the appliance for other than intended use.
34. Please dispose of the appliance for its flammable
refrigerant and blowing gas according to local
regulations.
35. WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear of
obstruction.
36. WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
37. WARNING: Do not damage the refrigerant circuit.
38. WARNING: Do not use electrical appliances inside
the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
39. Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
40. Warning: Risk of fire/flammable materials.
41. WARNING: When positioning the appliance, ensure
the supply cord is not trapped or damaged.
42. WARNING: Do not locate multiple portable socket-
outlets or portable power supplies at the rear of the
appliance.
43. This appliance is intended for use in domestic and
similar applications such as
- kitchen areas in shops, offices and other working
environments
- farmhouses
- in hotels, motels and other residential environments
- guest rooms.
44. Save these instructions.
45. This appliance may be used by children of at least 8
years of age, as long as they are supervised and have
been given instructions about using the appliance safely
and are fully aware of the dangers involved.
46. Cleaning and maintenance should not be carried out
by children unless they are at least 8 years of age and are
supervised by an adult.
47. Keep the appliance and its power cord out of reach of
children under 8 years of age.
48. When using electrical equipment, safety precautions
must always be taken to prevent the risk of fire, electric
shock and/or injury in the event of misuse.
49. The device must not be used if it has been dropped,
it obvious signs of damage are visible or if it has leaks.
Refrigerant :
The refrigerant gas contained in the circuit of this
appliance is isobutane (R 600a), a low-polluting but
flammable gas.
- When transporting and installing the appliance, take
care not to damage any part of the refrigerant circuit.
- Do not use any sharp or pointed tools to defrost the
unit.
- Do not use any electrical appliances inside the unit. If
the refrigeration system is damaged:
-Do not use a flame near the appliance.
Avoid sparks - do not light any electrical appliance or
electric lamp. Ventilate the room immediately.
KNOW YOUR ICE MAKER
CONTROL PANEL
Key (with indicator)
Function
The indicator lights in green when select large ice.
The indicator lights in green when select small ice.
The indicator lights in green when the appliance needs
to be cleaned.
Start or stop the appliance
Select the ice size
The indicator lights in green when making ice.
The indicator lights in red when the water reservoir is
lack of water.
The indicator lights in red when the ice basket is full.
BEFORE FIRST USE
1. Unpack the appliance, then check and make sure that all the accessories including ice
basket and ice scoop etc. are complete. Please contact with the client service department if
some accessories are missed.
2. Please ensure the ice maker is level and on a stable table or platform to avoid
malfunction.
3. The incline angle of the ice maker cabinet should not exceed 45°during transportation or
use. Do not turn the ice maker upside down. Doing so could cause the compressor or
refrigerating system to operate incorrectly. Please allow time for the fluids in the compressor to
settle after the ice maker is moved or transported. Before using the ice maker for the first time,
please wait for 2 hours after the unit has been leveled and positioned in the proper place.
4. The appliance must be placed on a dry and level surface with sufficient ventilation, far
from heat sources such as ovens, heaters and corrosive gases. Leave an 8-inch (20cm)
clearance on all sides of the ice maker for proper ventilation.
5. Do not fill the water reservoir with hot water. This may damage the ice maker. It is best to
fill the water reservoir with water of room temperature or lower.
6. Do not use the appliance at a very cold environment (lower than 5℃).
7. Clean the appliance by following the operation of “CLEANING AND MAINTENANCE”
before operate.
USING YOUR ICE MAKER
1. Ensure that the drain plug at the bottom of water reservoir is closed well.
2. Plug the ice maker into the wall outlet, the “ ” indicator blinks.
NOTE: Please make the ice maker be rested for 30 minutes before plug if it has been moved.
3. Open the top lid and remove the ice basket.
4. WARNING: Fill the water reservoir with potable water only.
NOTE: Do not fill above the MAX water level mark.
5. Alternatively, you can operate the Ice Maker under the condition that it is supplied with
water continuously by following the operation as below:
(1) Firstly prepare a 1/4 water tube (outer diameter:φ6.35mm) about 2m in length and then
insert its one end into the water inlet of Ice Maker.
(2) Check and make sure that the three-way ball valve equipped is compatible with the water
tube and water faucet in your home.
(3) After checking, connect the three-way ball valve with the tap water.
(4) Connect the other end of the 1/4 water tube with the 1/4 tube connector of the three-way
ball valve.
(5) Check and make sure all the connection of water tubes are tightly connected and then
open the three-way ball valve after confirmation.
6. Replace the ice basket and close the top lid.
7. Press “ ” key to select the ice size, “ ” means small ice while “ ” means large ice.
8. Press the “ ” key and the “ ”indicator lights solidly.
9. The ice-making cycle will last approximately 7-15 minutes, depending on the ambient
temperature and water temperature
10. The ice-making cycle starts with water being pumped into the ice tray situated below the
evaporator. Over the next 7-15 minutes ice forms on the evaporator. Once this has completed,
the ice tray will tilt backwards and the remaining water in the ice tray is drained back into the
water reservoir. The ice cubes are then dropped from the evaporator and pushed forward into
the ice basket by the ice shovel. The ice tray will automatically move back into position under
the evaporator and start the next cycle.
11. The “ ” indicator will light up when the ice basket is full and then the ice maker will
stop the ice-making cycle automatically. Gently remove the ice from the ice basket with the ice
scoop. About 5 seconds later, the ice maker will restart its ice making function automatically.
12. The “ ” indicator will light up when the water reservoir is lack of water and the
ice-making cycle will stop automatically. At that time, remove the ice basket and add water to
the water
reservoir, and then press “ ” key again to restart the ice-making cycle. And the “ ”
indicator will not light up if the Ice Maker is operated under the condition that it is supplied with
water continuously.
13. When you have got your desired amount of ice, stop the ice making cycle by pressing the
“ ” key and unplug the unit from the wall outlet.
14. Open the top lid and transfer the ice to a freezer.
NOTE: The ice will last in the ice maker for up to a 18 hour period, depending on the ambient
temperature.
15. Allow the ice maker to wall up to room temperature.
16. Suggest replacing the water every a week. Please empty the water reservoir if the ice
maker is not used for a long time.
CLEANING AND MAINTENANCE
To keep your ice tasting fresh and your ice maker looking
great, we recommend cleaning your ice maker at least
once per week.
1. Stop the ice-making cycle by pressing the “ ”
key, unplug the ice maker from the wall outlet and allow
it to warm up to room temperature.
2. If residual water is found in the ice tray, gently push
the ice tray back so that all water drains into the water
reservoir.
3. Move the appliance forward to a place 60mm away
from the working table and open the drain plug to drain
out excess water (see Fig.1, Fig.2 and Fig.3).
4. Check and make sure the drain plug must be closed
well. Fill the water reservoir with clean water, press “ ”
until the ‘ ’ indicator flashes, then press the “ ” key ,
the pump will start to pump water and keep running for 6
minutes, and it will enter into standby condition after
running for 6 minutes, finally, open the drain plug and
empty the water.
5. Remove the ice basket.
6. Clean the ice maker interior with a soft cloth soaked
with warm water and vinegar, then rinse with clean water
and then drain all the water.
7. Replace the drain plug well in position. Wash the ice
basket and ice scoop in warm soapy water. Rinse and
dry.
8. Clean the exterior of the ice maker with a soft damp
cloth. Use a mild dishwashing soap, if necessary.
Table of contents
Languages:
