Kodak Pixpro AZ651 User manual

User Manual

Declaration of Conformity

Responsible Party: JK Imaging Ltd.

Address: 1411 W. 190th Street, Suite 550, Gardena, CA90248, USA

Company Website: www.kodakpixpro.com

INDUSTRY CANADA

This device complies with Canadian RSS-210.

This device complies with Industry Canada license-exempt RSS standard (s).Operation is

subject to the following two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference, including interference that may cause undesired operation

of the device.

Radiation Exposure Statement:

This product complies with the Canadian portable RF exposure limit set forth for an uncontrolled

environment and is safe for intended operation as described in this manual. Additional RF

exposure reduction can be achieved if the product can be kept as far as possible from the user

body or set the device to lower output power if such function is available.

Industry Canada statement:

Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils

radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1)

le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter

tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement

indésirable.

BEFORE YOU START

Déclaration d’exposition aux radiations:

Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les

Etats-Unis et le Canada établies pour un environnement non contrôlé.

Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux

expositions RF peut être augmentée si l’appareil peut être conservé aussi loin que possible

du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si

une telle fonction est disponible.

For Customers in Europe

This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of

electrical waste and electronic equipment in the European countries. Please do not

throw the equipment into domestic refuse. Please use the return and collection

systems available in your country for proper, safe disposal of this product.

“CE” mark indicates that this product complies with the European requirements for

safety, health, environment and customer protection. “CE” marked cameras are

intended for sales in Europe.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/

EC. The following test methods have been applied in order to prove presumption of

conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

- EN 60950-1: 2006+A11:2009 +A1:2010 +A12:2011

Safety of Information Technology Equipment

- EN 50566: 2013

Product standard to demonstrate compliance of radio frequency fields from handheld

and body- mounted wireless communication devices used by the general public (30

MHz — 6 GHz)

- EN 62209-2: 2010

Human exposure to radio frequency fields from handheld and bodymounted wireless

communication devices — Human models, instrumentation, and procedures

Part 2: Procedure to determine the specific absorption rate (SAR) for wireless

communication devices used in close proximity to the human body (frequency range of

30 MHz to 6 GHz)

- EN 300 328 V1.8.1 : 2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band

and using spread spectrum modulation techniques; Harmonized EN covering essential

requirements under article 3.2 of the R&TTE Directive.

- EN 301 489-1 V1.9.2: 2008C

Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electro Magnetic

Compatibility (EMC) standard for radio equipment and services; Part 1: Common

technical requirements.

- EN 301 489-17 V2.2.1:2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic

Compatibility (EMC) standard for radio equipment and services; Part 17: Specific

conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance

RLAN equipment.

For Customers in the U.S.A.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Radiation Exposure Statement:

This product complies with the FCC portable RF exposure limit set forth for an uncontrolled

environment and is safe for intended operation as described in this manual. Additional RF

exposure reduction can be achieved if the product can be kept as far as possible from the user

body or set the device to lower output power if such function is available.

About this Manual

Thank you for purchasing this KODAK PIXPRO digital camera. Please read this manual

carefully and keep it in a safe place for future reference.

JK Imaging Ltd. reserves all rights of this document. No part of this published manual may

be reproduced, transmitted, transcribed, stored in a retrieval system or translated into

any language or computer language, in any form, by any means, without the prior written

permission of JK Imaging Ltd..

All trademarks mentioned in this manual are used for identification purposes only and are

properties of their respective owners.

This manual provides you with instructions on how to use your new KODAK PIXPRO digital

camera. Every effort has been made to ensure that the contents of this manual are

accurate, however JK Imaging Ltd. reserves the right to make changes without notice.

Throughout this manual, the following symbols are used to help you locate information

quickly and easily:

Indicates useful information.

Indicates precautions are to be taken while operating the camera.

In the instructions below, the following symbols may be used throughout this manual on

how to operate the camera. This is to facilitate better understanding.

「Item properties」：The optional properties in the camera interface are indicated by the

symbol「」.

SAFETY NOTES

Safety notes for this camera

Do not drop the camera or allow it to hit

solid objects.

Do not attempt to disassemble or repair

the camera.

Do not use or store the camera in dusty

places or on a beach to prevent dust or

sand from entering the camera, causing

possible damage to it.

Do not use or store the camera in a hot

environment or under direct sunlight.

Do not use or store the camera near a

powerful magnetic field, for example near

a magnet or transformer.

Avoid touching the lens of the camera.

Do not expose the camera to direct

sunlight for a long period time.

To prevent the camera from being damaged

by moisture, do not use or store the camera

in very humid environments, such as in rain

or near bodies of water.

If water accidentally comes in contact

with the camera, turn the camera off,

remove the battery and the memory card,

and dry it within 24 hours.

When you take the camera from a cold place

to a warmer environment, condensation may

occur. Please wait for a reasonable period of

time before you turn it on.

Before you remove the battery and

memory card, the camera should be

turned off.

When you clean the body of the camera,

do not use abrasive, alcohol-based or

organic cleaner.

Use the professional lens wiping cloth

and dedicated cleaner to wipe and clean

the lens.

Download your photos and remove the

memory card when you are going to store

the camera for a long period of time.

If this camera is not in use for a long

time, please keep it in a dry and clean

condition.

Our company will not pay compensation

for any failure of playback of pictures or

videos caused by improper operation.

Safety notes for battery

Please use a battery that is the same

type as the one included.

Please use the attached charger to

charge the battery.

If battery fluid leaks inside the camera,

contact our customer service department.

If battery fluid leaks onto your skin, rinse

your skin with clean water and seek

immediate medical attention.

Disposal of used batteries should be

carried out in accordance with the local

(national or regional) regulations.

To prevent the battery from being

damaged, do not drop the battery or

allow it to hit solid objects or to be

scratched by the objects.

Do not let the battery come in contact

with metal objects (including coins) to

avoid short circuiting, discharging,

excessive heat, or possible leakage.

Do not attempt to disassemble the

battery.

Do not expose the battery to water.

Always keep the battery contacts dry.

Do not heat the battery or throw it into a

fire to avoid a possible explosion.

Do not store the battery in a hot

environment or in direct sunlight.

If the battery overheats during charging

or use, stop charging or use immediately.

Turn off the product, remove the battery

carefully, and wait until it cools down.

When the camera is stored for a long

period of time, remove the battery and

keep it in a dry place that is not

accessible to infants and children.

In a colder environment, the performance

of the battery could be noticeably reduced.

When you install the battery, install it

according to the positive and negative

markings on the battery compartment.

Never force it into the battery

compartment.

Safety notes for memory card

We suggest buying only well-known,

name brand memory cards to ensure

peak performance.

Format the memory card using the camera

before you use it or insert a new one.

Do not drop the memory card or allow it

to hit solid objects to avoid damaging it.

Do not attempt to disassemble or repair

the memory card.

Do not expose the memory card to water.

Always keep it dry.

Do not remove the memory card when

the camera is turned on. Otherwise, the

memory card could be damaged.

Do not directly edit the data on the

memory card. Copy the data to your PC

before you edit them.

When the camera is stored for a long

period of time, be sure to download your

photos and remove the memory card.

Store it in a dry environment.

Do not modify the name of the files or

folders of the memory card using your

PC. Modifying the file names may cause

the files to not be recognized on the

camera or a possible error may occur.

A photo taken with the camera will be

stored in the folder that is automatically

generated on the memory card. Do not

store photos that are not taken using this

camera in these folders as the pictures

cannot be recognized during the

playback.

When you insert a memory card, make

sure the notch of the card matches the

markings on the top of the card slot.

Other Safety Notes

Do not disconnect the power or turn the camera off during the update process. Doing so

may cause incorrect data to be written and the camera may not power on later.

Do not hang the neck strap of the camera around the neck of a child.

When using your camera on an airplane, observe the relevant rules specified by the airline.

Due to the limitations of manufacturing technology, the LCD screen may have a few dead

or bright pixels. These pixels do no effect the quality or performance of the camera, photos

or video.

Do not expose the LCD screen to water. In a humid environment, only wipe it with a soft

and dry cleaning cloth.

If the LCD screen is damaged and the liquid crystal comes into contact with your skin, wipe

your skin with a dry cloth immediately and rinse it with clean water. If liquid crystal comes

into contact with your eyes, wash them with clean water at least for 15 minutes and seek

immediate medical attention. If you accidentally swallow liquid crystal, rinse your mouth

immediately and seek medical attention.

Other manuals for Pixpro AZ651

Table of contents

Other Kodak Digital Camera manuals

Kodak

Kodak PIXPRO FZ151 User manual

Kodak

Kodak Z812 - EASYSHARE IS Digital Camera User manual

Kodak

Kodak PIXPRO FZ51 User manual

Kodak

Kodak Astro Zoom PIXPRO AZ252 User manual

Kodak

Kodak M340 - GUIA COMPLETO DO USUARIO User manual

Kodak

Kodak EasyShare LS753 User manual

Kodak

Kodak C875 - EasyShare 8MP Digital Camera User manual

Kodak

Kodak EASYSHARE C1450 User manual

Kodak

Kodak PRINTOMATIC Technical manual

Kodak

Kodak C433 - Easyshare Zoom Digital Camera User manual

Kodak

Kodak EASYSHARE SPORT C123 User manual

Kodak

Kodak EasyShare M1073 IS Service manual

Kodak

Kodak PIXPRO FZ152 User manual

Kodak

Kodak 1500 User manual

Kodak

Kodak DX3600 - EasyShare 2MP Digital Camera User manual

Kodak

Kodak EasyShare M893 IS Service manual

Kodak

Kodak Advantix C370 User manual

Kodak

Kodak C763 - EASYSHARE Digital Camera User manual

Kodak

Kodak PIXPRO AZS250 User manual

Kodak

Kodak EasyShare M1073 IS Service manual

Kodak

Kodak DCS Pro SLR/n User manual

Kodak

Kodak DCS 330 - FIRMWARE VERSION 3.2 AND LATER User manual

Kodak

Kodak M753 - EASYSHARE Digital Camera User manual

Kodak

Kodak CD14 - EasyShare 8.0MP Digital Camera User manual

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions