KOCOM KCV-S701IP User manual
KCV-S701IP MANUAL
www.kocom.com
[
7" Color Digital LCD Monitor
]
■ 7" Color digital LCD monitor
■ Call & communication with visitors
■ Receive instant notifications to your smartphone through
WiFi & Ethernet in local and remote places
■ Video and audio monitoring of the camera(s)
■ Operating condition display with icons (OSD)
■ Door opening function
COLOR HANDSFREE IP VIDEOPHONE
Smartphone APP Download
Android i-OS
2
Cautions for set-up
Warnings for Usage
Cautions for Repairs and Maintenance
·Do not install this unit near the water and dust, for example, in a bathroom or near the washing machine. It caused fire and electric shock.
·Do not install this unit near the fire, for example, near kitchen sink, heater or the like.
·Do not install near the noxious gar such as Hydrogen Sulfide, metal power and the like.
·Do not install near the water and chemicals.
·Do not give any damage, break and modify the plug. Overloading, heating, pulling causes the damage.
·Do not place the plug near the heater. The damaged code causes fire and electric shock. Do not pull the power code when unplugging.
·The damaged code causes fire and eclectic shock. Must pull with plug. Do not touch with wet hands. It causes the electric shock.
·Do not use any other voltage, except the marked regular voltage.
·Do not use the power terminal at the units to other electric device except the designed device.
·Do not install the units at the leaking place if it doesn’t have any waterproof mark. Do not install the unit when the power is on.
·Install the circuit breaker after checking the safety such as electric shock and leakage. Turn off the power before you install or A/S
·Check the suitability of the lines for installing when you use the exiting lines.
·Do the wiring work by using the designed material.
·Connect the electric wire with the designed ways and ground.
·Do not connect with any other devices except the designed devices to compose the system.
·Unplug electric wire and communication lines from the units before moving to another place.
For safe use, please stick to the following cautions.
Cautions for Safety
·Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
·Set the device of the wall-mounted type not to fall. Falling from an earthquake causes personal injury.
·The law limits distributing the power lines to an authorized person from government.
The work from an unaurhtorized person cause fire or electric shock.
·Place this unit securely on a stable surface. Serious damafe and/or injury may result if the unit falls.
·Do not set up this unit near the leaking place because it may expose you to dangerous voltages or other risks.
·Even if your product is water proof, do not install it slanted place of water leakage, which can a short circuit.
·Fix the product on the wall safely according to the installation guideline to prevent any damage or injury.
ㆍDon’t put any stuff in 30cm around the monitor, not to block the air hole.
·The work of distributing wires needs skills and experiences. So please, for assistance, contact your dealer or call service center.
·The communication lines should be built in being distant from the power source.
This may result in the risk of fire, electric shock and communication disorder.
·Setting the communication lines in a high humid place such as outside without any protection from rain causes the communication disorder.
·Keep the hook at the wall-mounted device safe. The hook may cause the physical injury.
·Think about the thickness and quality of wall material. The unqualified material may make the device fall.
·Keep the inside of the device clean. Having the dust inside without any cleaning for a long time causes the fire.
If necessary, contact your dealer or service center to get cleaning service.
Caution
Warning
·Unplug this device when you want to check the inside. If there is no plug, please, turn off the circuit breaker.
·Unplug this device when you try to move it to another place.
If the electric line is connected inside of the unit, please contact your dealer or service center.
·Please, keep this manual after reading these instruction carefully. ·Read and understand all instructions to set up rightly.
·This Cautions for Safety may include items that are not contained in specifications of the product that consumer purchases.
·If you need any assistance in terms of system set-up or operation, please contact your local service centre
To help our customers to understand this manual, to prevent any personal injury or property damage, some marks are used in the manual.
The marks and the drawing signs are below. Please, understand the marks before reading the manual.
Sign to show what not to do.
Sign to tell you that you should follow the instructions.
Sign to tell you that you can't disassemble this unit.
Sing to tell you that you need more attention including (high voltages, electric shock, danger, warning)
Sign to tell you that you must unplug the unit.
Mishandling the device with ignoring this sign may result in serious injury or death.
Mishandling the device with ignoring this sign may result physical injury or material damage.
The important marks in the manual.
The meaning of the drawing signs.
3
Caution
Cautions for Use
Things You Need to Know
Videophone
Cautions
Cautions for Abnormality
Safety Instructions, Warnings and Cautions of Each System
·This product is designed as a home videophone and cannot use continuously like monitor camera.
·If there is temperature difference between inner part of camera and surrounding, dew condensation occurs on camera lens and may disturb image.
If dew condensation is removed from camera lens, image quality recovers.
·White LED light examination range is narrower than camera shot range at night, so there is less amount of light at night than day.
So it is difficult to see the face in low illumination condition due to noise increase on screen, but it is not from defect.
·Monitor screen (liquid crystal panel) is not in defect when some pixels always light or black out.
·Please install monitor and camera over 5cm away.
Also, avoid installing at a place with too much noise, because too much noise around camera causes phone call inferiority.
·Do not place an object within 20cm in front of monitor. It causes phone call inferiority, especially because microphone is installed at the top of monitor.
·If strong light such as sunlight flows into camera module, screen saturation (or strange mark) and image shaking might occur.
·This is not a defect, so please do not install camera where a direct ray of light do not flow if possible.
·Separate the AC/DC lines with the hook of the wall-mounted type when installing. 쪾 ·Connect the lines after peeling the wires properly.
·Do not distribute signal line with AC line. ·Use the designed driver to connect the lines to terminal.
·Do not clean the LCD with the damp cloth for cleaning. Use the only dry and soft cloth. ·Do not install the main gate monitor at the leaking place.
·In some cases there is occurrence of product destruction, malfunction, noise mixing and picture quality deterioration due to mixing of other tool's
induced. voltage or thunder with communication wiring of monitor/camera, monitor/extended monitor.
Do not wire with power line such as outdoor wiring or AC power, or phones and other tools.
·You cannot use it if you incorrectly wire the AC voltage between monitor/camera, monitor/extended monitor.
Call the store or agency where you purchased this product and consult to solve the problem.
Beware that unfixable damage might be caused due to authorizing AC voltage on communication wiring of monitor/camera, monitor/extended monitor.
·Do not ever disjoint this product. It may cause electrocution accident when touching high-voltage circuit inside this product.
·Outside power authorizing this product must be confirmed of product description and use rated voltage.
Beware that if higher voltage is authorized, unfixable damage might be caused due to product destruction.
·Power must be connected to domestic voltage (product rated voltage) consent or interior wiring.
If connected to other motive power or inverter-type power, product destruction, noise mixing, and picture distortion may occur.
·Do not drop this product. Glass is used for monitor and might break, or cause other circuit inferiority.
In such case, immediately turn down the power switch, and call to consult agency or store in which this product was purchased.
·Keep away from any conditions where water splatters or falls. Do not place anything containing water like a vase on the product.
·If installed near transmission antenna such as broadcasting station, electric wave may mix and cause picture distortion or voice mixing.
·Avoid installing near tools with strong electromagnetic waves such as microwaves and cell phones, or it may cause picture distortion.
·Do not install monitor in following places.
① Above or around water heater, rice-cooker, heater ② Place exposed to direct rays of the sun
③ Place with temperature below 0'C such as cold store ④ Place with high humidity such as bathroom, washroom, heated room
⑤ Place with a lot of gas, dust, smoke ⑥ Dangerous place with sprays of water or chemicals
·Do not wipe with insecticide, drugs or chemicals such as thinner and alcohol, or it may damage
the surface of this product.
·Beware of occurrence of image quality deterioration or malfunction from cause of humidity due to
penetration of chemicals or water into camera’s urea resins.
·As in the picture, it prevents temperature difference of camera (outside) and monitor (inside), and
removes dew condensation caused by humidity of camera window.
·Camera must be installed when wall cement is completely dry.
·When product is installed in winter below -5'C, wait for approximately 2 hours to connect. Dew formation
in monitor and camera due to temperature difference inside and outside may cause product defect.
·Avoid installing monitor and camera in place directly exposed to heat or where gas noxiousness is highly occurring.
·Do not disassemble this unit at will as this device is composed by precision parts. 쪾 ·Install the unit by following the set-up instructions of Kocom.
·Do not touch or insert any foreign substances, for example, sticker, magnetic, opener and the like.
·Make U-type at the end of wires as the rain can effect on the system by following the wires during the rainy season.
·This unit is not designed for security purpose. 쪾·Do not handle the unit with the wet hands.
·Do not place a pot with water or a small metal material on the Units.
·Do not cover the ventilating opening or put any metal material in the units. 쪾
·During thunderstorms, avoid using this unit. There may be a remote risk of an electric shock from lighting.
·Do not modify the unit. ·Open the main gate after checking ID if the image and sound system do not work. Call A/S
·Change the damaged electric code.
·Unplug this unit from plug socket and refer servicing to an authorized service center when the following conditions occur:
·If liquid has been spilled into the unit. 쪾·If the unit does not work normally by following the operating instructions.
·If the unit exhibits a distinct change in performance. ·If the unit has been dropped or physically damaged.
ㆍThe mains plug, as a disconnection device, shall remain readily accessible by the user.
·Do not disassemble the back and cabinet cover.
4
■Door Camera Installation
Sun Visor (Option)
Installation Location
■ Monitor Installation
■ Directly connecting cut-off power cord with power wire
1) Do not perform such electric work on your own. Installing product in this way
requires reliance on electric installation man with electric work license.
2) Insulate with insulating tape while cutting off power cord and connecting with power
wire so electric wire metal does not expose. Contact between exposed electric wires
cause fire or electric shock accident.
3) Such electric work requires connection after interception of supplied power.
1) Remove wall hanger frame metal behind monitor.
2) Install wall hanger frame metal on 1 type box or wall with screws.
3) Connect wiring to monitor back terminal referring to product connection diagram.
4) Hang monitor on metal wall hanger frame and fix monitor screws.
5) Connect monitor`s power plug into consent and check to see if the power switch is [ON]
on the left side of monitor.
1) Install metal wall hanger frame on type 1 box or on the wall with attached screws.
2) Connect wiring to terminal on the back of door camera referring to product connection diagram.
3) Hang door camera on metal wall hanger frame and fix door camera on metal wall hanger frame
using attached screw.
Avoid heavy rain directed to the product which can cause damage since it is not waterproof.
■ Monitor Installation Location
·Standard monitor installation height
is about 1,500mm where screen
center is at eye level.
In this case, wall-hanging metal
center (center of piping) is 1,450mm
above ground level.
·Standard installation height
■ Caution of Camera Installation
·Avoid installing camera exposed to direct ray of light (and sun).
·Beware backlight and darkness of visitor`s face, which makes identification difficult.
·Avoid installing camera in places such as the following picture.
(1) Place illuminating sky as background
(2) Place with white wall reflecting direct ray of light
(3) Place with direct ray of light
·Standard installation in height
■ Camera Installation Location
·Camera installation in height standard
camera installation height is when
lens is about 1,400mm above the floor.
In this case, camera stack center
(piping box) is above 1,390mm above
ground level.
·Standard installation in height
■ Door Camera
■ Wire
■ Wire
■ A Wall Hanger Frame
■ A Wall Hanger Frame ■ Sun Visor (Option)
■ Monitor
Components of Product
Specifications
Monitor
±±
℃℃
Door
Camera
±
℃℃
˚
■Screws
■Screws
6
■
Monitor
■
Door Camera
·Right side·Left side ·Front
·Front
Door camera + Sun Visor (Option)
·Back
·Back
① MIC
② LCD
③ Speaker
④ Menu button : Enter in setup menu /
Exit from setup menu
⑤ Monitoring button : Monitoring then door camera
⑥ Call button : Connect talk with the door camera
⑦ Open door button : Open the Door
⑧ Power Switch
⑨ Jog Switch
⑩ Terminal
⑪ RJ-45 Connector
① Mic
② Camera Lens
③ LED
④ Call button
⑤ Speaker
①VCC(BLUE)
②GND(YELLOW)
③AUDIO(RED)
④VIDEO(WHITE)
①COM(BLACK)
②NO(BROWN)
③NC(ORANGE)
A. Connection for monitor B. Connection for door opener
A B
2
1
2
5
5
6
7
8
1
1 1
3
9
10
11
3
3
4
4
4
Name and Functions of Each Part
7
■
System Block Diagram
■
Terminal
A
B
C
※
UTP CAT.5 wiring is used as shown in the following
picture The total length of wiring between camera
and monitor is limited to 50m.
※ Slight reduction in image quality may be noticed
depending upon conditions of installation environment.
A. CAMERA 1
① VCC
② GND
③ AUDIO
④ VIDEO
B. DC Adaptor
① 12V
② GND
C. Ethernet
Orange
W/Orange
① VCC
1 line (2 wire)
③ Audio
1 line (2 wire)
② GND
1 line (2 wire)
④ Video
1 line (2 wire)
Green
W/Green
Blue
W/Blue
Brown
W/Brown
·Ethernet System
4
4
2
2
DOOR CAMERA
DOOR CAMERA MONITOR
MONITOR
Ethernet
CLOUD SERVER
Mobile phone
Internet
CLOUD SERVER
Mobile phone
Internet
④ ①
② ①
Product Connection Diagram
·WIFI System
8
■ Booting
■ Network Setting
Booting screen is shown when you turn on power switch located on the left.
After 30 seconds, model name(KCV-S701IP) is shown and then booting is completed.
After that, screen is turned off.
Booting Screen Model name displayed Screen
Item Normal
Connection
Error Solution
LAN
Check connection status between KCV-S701IP and switching hub
Cloud Server
Check connection status of WAN
1
When used with wired switching hub(router)
1) IP addressing should be set in DHCP.
2) Connect KCV-S701IP with switching hub.
3) Press menu button to check connection status between network and sever.
(It can take few extra seconds or minutes depending on the condition of Network status)
Please connect KCV-S701IP to the wired switching hub (router).
The wired switching hub must be connected with internet
Instructions for Operation
MENU
1. Speakin Volume
2. Call Volume
3. Calling Times
4. Open Time
5. SIP Push Time
6. Language
7. BLE SSID
8. Request an authentication code
9. Registration Phone Number
10. System Info
2
2
2
2
10
ENGLISH
KOCOM-KCV-701IP-2000F2
KCV-S701IP
9
Instructions for Operation
■ Network Setting
To set WIFI mode of wireless AP at KCV-S701IP, you must install APP called
"KOCOM SMART HOME" to your Android Phone / iPhone.
Please scan APP QR code on page 1 of this manual. Or you can download by following
procedures.
Android : Google playstore > KOCOM smarthome, i-OS : Appstore > KOCOM smarthome
2
When used with router (WiFi)
To register your phone in KCV-S701IP and to set KCV-S70IP's WIFI from the APP, you must
turn on Bluetooth in your phone.
Also, Bluetooth WIFI registration and your phone registration are possible while KCV-S701IP
monitor's screen is on. Therefore, please proceed the following steps when the KCV-S701IP monitor's menu screen is
on. While proceeding the registration steps, please click the menu button to keep the screen on
10
■ APP Download, Specification of Smart Phone and Network
■ Network Setting
Search "KOCOM Smart Home" in Play Store(Android) or APP Store(IOS)
Item Description
Recommended Spec
of Smart Phone
Andriod 6.0 version or higher.
iOS 11.4 version or higher.
Bluetooth 4.1 standard (Range: Within 1m)
Recommended Spec
of Wireless Router
Wireless router using only 2.4G
- Wireless router using 2.4G and 5G may not interwork.
- IEEE 802.11 g/n
Recommended Network
Delay Time
KCV-S701IP <-> AP within 50msec
KCV-S701IP <-> CLOUD within 100msec
- In case that delay time of network exceeds the abovementioned, it may not Interwork.
- It may not interwork depending upon the status of 3G, LTE and telecom.
Recommeded Network
Data rates
20Mbps
Depending on network transmission speed and condition, the video or voice would be disconnected
Press setting button. Input WiFi SSID and
password.
Press WiFi settings
button.
You must click the menu
button from KCV-S701IP
monitor to
keep the screen on.
Select
KOCOM-KCV-S701IP-XXXXXX.
If nothing is found from the
BLE menu, please click the
icon to search BLE device.
1) Start KOCOM Smart Home APP
Instructions for Operation
KCV-S701IP reboots automatically after WiFi is completely set up.
Icon showing WiFi normal connection is seen when pushing
menu button and going into menu screen.
Depending on each phone, WIFI mode cannot be operated well.
Then, please start from the first step again.
If still problem happened again, then please contact your local service center.
MENU
1. Speakin Volume
2. Call Volume
3. Calling Times
4. Open Time
5. SIP Push Time
6. Language
7. BLE SSID
8. Request an authentication code
9. Registration Phone Number
10. System Info
2
2
2
2
10
ENGLISH
KOCOM-KCV-701IP-2000F2
Table of contents
Other KOCOM IP Phone manuals
