KOBE INX2830SQB-700-1 Troubleshooting guide

KOBE Range Hoods

Brillia Series

INX28 SQ-700-1 Series

Model No.:

INX2830SQB-700-1 (30”)

INX2830SQH-700-1 (30”)

INSTALLATION INSTRUCTIONS

AND OPERATION MANUAL

IMPORTANT

READ THIS FIRST

READ BEFORE INSTALLATION

1. Carefully check all contents of packages.

2. Thoroughly inspect the unit for any shipping damages, cosmetic

damages or defects.

3. Have a certified contractor/ electrician test the unit before installation.

IF THERE IS ANY PROBLEM:

1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL

PACKAGING MATERIAL.

2. Have your original invoice as proof of purchase and product serial

number ready.

3. Contact your merchant for product replacement due to shipping

damages, cosmetic damages or defects.

4. For all other issues, email customer.service@koberangehoods.com.

NO RETURN, NO REFUND, NO EXCHANGE IF:

1.PRODUCT HAS BEEN INSTALLED

2.KNOCK-OUT HOLES HAVE BEEN

PUNCTURED

3.MISSING ORIGINAL PACKAGING

MATERIAL AND/OR PARTS

[ENGLISH]

- READ AND SAVE THESE INSTRUCTIONS -

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS.................................................................................... 1

COMPONENTS OF PACKAGE................................................................................................. 3

INSTALLATION ......................................................................................................................... 5

OPERATING INSTRUCTIONS.................................................................................................. 7

MAINTENANCE......................................................................................................................... 8

SPECIFICATIONS..................................................................................................................... 9

MEASUREMENTS & DIAGRAMS.............................................................................................10

PART LIST................................................................................................................................11

CIRCUIT DIAGRAM..................................................................................................................13

TROUBLE SHOOTING.............................................................................................................14

WARRANTY.............................................................................................................................15

WARRANTY INFORMATION FORM........................................................................................17

- READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING -

ALL WIRING MUST BE DONE BY A PROFESSIONAL AND IN

ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES

IMPORTANT SAFETY INSTRUCTIONS

- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY,

OBSERVE THE FOLLOWING:

1) Installation and electrical wiring must be done by qualified professionals and in accordance with all

applicable codes and standards, including fire-rated construction.

2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden

utilities.

3) Ducted fans must be vented to the outside.

a) Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT SERVICE

PANEL.

b) Clean all grease-laden surfaces frequently. To reduce the risk of fire and to disperse properly,

make sure to vent air outside. DO NOT vent exhaust air into wall spaces, attics, crawl spaces or

garages.

NOTE

This warranty is invalid without an authorized agent’s receipt or if unit is

damaged due to misuse, poor installation, improper use, mistreatment,

negligence or any other circumstances beyond the control of KOBE

RANGE HOODS authorized agents. Any repair carried out without the

supervision of KOBE RANGE HOODS authorized agents will

automatically void the warranty.

KOBE RANGE HOODS will not held responsible for any damages to

personal property or real estate or any bodily injuries whether caused

directly or indirectly by the range hood.

WARNING: TO REDUCE THIS RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE

TOP GREASE FIRE:

1) Keep all fan, baffle/spacer/filter/oil tunnel/oil container and grease-laden surfaces clean. Grease

should not be allowed to accumulate on fan, baffle/spacer/filter/oil tunnel/oil container.

2) Always turn hood ON when cooking.

3) Use high settings on cooking range ONLY when necessary.

4) Do not leave cooking range unattended when cooking.

5) Always use cookware and utensils appropriate for the type and amount of food prepared.

6) Use this unit only in the manner intended by the manufacturer.

7) Before servicing, switch power off at service panel and lock service panel (if possible) to prevent

power from switching on accidentally.

8) Clean ventilating fan frequently.

What to Do In The Event Of a Range Top Grease Fire

1) SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner.

KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not

go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911.

2) NEVER PICK UP A BURNER PAN –You May Ger Burned.

3) DO NOT USE WATER, including wet dishcloths or towels –a violent steam blast will result.

4) Use an extinguisher ONLY if:

a) You have a Class A, B, C extinguisher and know how to operate it.

b) The fire is small and contained in the area where it started.

c) The fire department has been called.

d) You can fight the fire with your back to an exit.

What to Do if You Smell Gas

1) Extinguish any open flame.

2) Do not try to turn on the lights or any type of appliance.

3) Open all doors and windows to disperse the gas. If you still smell gas, call the Gas Company and

Fire Department right away.

CAUTION

1) For general ventilation use only. Do not use to exhaust hazardous or explosive materials and vapors.

2) To reduce the risk of fire, use only metal ductwork. Sufficient air is needed for proper combustion

and exhausting of gases through the flue (chimney) to prevent back drafting.

3) Follow the heating equipment manufacturer’s guideline and safety standards such as those published

by the National Fire Protection Association (NFPA), and the American Society for Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE), and code authorities.

4) Turning any switch on may cause ignition or an explosion.

5) Due to the size and weight of this hood, two people installation is recommended.

ELECTRICAL SHOCK HAZARD –Can result in serious injury or

death. Disconnect appliance from electric power before servicing.

If equipped, the fluorescent light bulb contains small amounts of

mercury, which must be recycled or disposed of according to Local,

State, and Federal Codes.

COMPONENTS OF PACKAGE

(Must keep all material for returns or refunds)

MODEL NO.: INX2830SQB-700-1 (30”)

Range Hood Box

{A} KOBE Range Hood

{B} Warranty Registration Card

{C} Quick Reference Guide

{D} Baffle Filter –2pcs for 30”

{E} Aluminum Filter –2pcs for 30”

{F} Screws

{G} Flapper (2 pcs)

{A}

{B} {C}

{D} {E}

{F} {G}

- FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE www.koberangehoods.com.

Size: 4 x 35 mm

QTY: 8

Baffle Filter

*Installed by default

Aluminum Mesh Filter

*Extra filters

*Pre-installed

(Must keep all material for returns or refunds)

MODEL NO.: INX2830SQH-700-1 (30”)

Range Hood Box

{H} KOBE Range Hood

{I} Warranty Registration Card

{J} Quick Reference Guide

{K} Honeycomb Filter –2pcs for 30”

{L} Aluminum Filter –2pcs for 30”

{M} Screws

{N} Flapper (2 pcs)

{A}

{B} {C}

{D} {E}

{F} {G}

- FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE www.koberangehoods.com.

Size: 4 x 35 mm

QTY: 8

Honeycomb Filter

*Installed by default

Aluminum Mesh Filter

*Extra filters

*Pre-installed

INSTALLATION

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING

Calculation before Installation

To calculate installation, please refer to TABLE 1. (All calculation in inches).

- FOR BUILT-IN / INSERT -

TABLE 1

A = Height of Floor to Ceiling

B = Height of Floor to Counter Top

(Standard: 36”)

C = Height of Counter Top to Wood Frame

Bottom (Recommended 26” to 30”)

D = Height of Wood Frame

SAFETY WARNING

•HOOD MAY HAVE SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF REMOVING

ANY PARTS FOR INSTALLING, CLEANING, OR SERVICING.

•BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE HOOD MAY

OCCUR. USING HAND TOOLS IS RECOMMENDED. DO NOT OVER TIGHTEN SCREWS.

•MAKE SURE TO PREVENT ANY DEBRIS FROM ENTERING THE VENT OPENING TO

AVOID DAMAGE OR MALFUCTION.

INSERT INSTALLATION

Before Installation

1. Read any provided document(s).

2. Test the range hood by temporarily connecting it to an outlet and turning ON the fan and lights.

3. If you run into any problems, contact KOBE Range Hoods.

Venting Requirements

4. The range hood has top 6” round exhaust (default).

5. Decided the location of the venting pipe from the hood to the outside. A straight, short vent run

will allow the hood to perform more efficiently. Try to avoid elbows, transitions, and long run as

much as possible as this may reduce the performance of the hood. Make sure that the duct work

leads to the outside.

6. It is recommended to use metal/aluminum duct/pipe with a uniform size (ex. 6” round pipe from

range hood to the outside).

7. If an elbow is necessary, a minimum of 12” straight run is necessary before the elbow.

Clearance

8. Clearance is the distance between the cooktop and the bottom of the range hood. The recommended

minimum clearance for this model is 26” and the maximum clearance is 30”.

9. It is important to install the hood at the recommended clearance. Installing too low could result in

damage and/or fire hazard while installing too high may result in reduced performance and efficiently.

Hood Installation

10. The hood has to be installed inside the cabinet. It is

recommended to install a front and rear stud support. Refer to

Figure 1. The stud supports are located 1-1/2” from the rear

and 2” from the front.

11. Determine and mark the centerlines on the base of the wood

frame where the insert will be installed.

12. Determine and make all necessary cuts in the wall or ceiling of

the ductwork. Note: Install the duct work before installing the

insert.

13. Cut out the opening where the insert will be installed. Refer to

Figure 2.

14. Slide the hood to the opening.

15. Locate the screw holes (4) on each side of the insert. Adjust

the level of the hood casing support according to the thickness

of the base.

16. Secure the hood using the screw holes that are located at the

front and back of the unit (screws provided). Refer to Figure 3.

17. Make sure the hood casing support is secure before releasing.

Ductwork

18. Attach the vent adapter to the exhaust opening using 4 x 8 mm

screws.

19. Connect the pipe to the vent adapter and seal the joint with duct

tape. Make sure it is completely airtight.

Electrical Wire

20. Connect the range hood to an outlet.

21. If hardwired is desired, cut off the plug and connect three wires

(black, white, green) to the outlet wires and cap with wire

connectors. Connect the wires according to color (ex: black to

black).

Finish

22. Remove any protective film from the hood, if any.

23. Before using, make sure that any accessories such as baffle filters are properly installed where

applicable.

24. Test the range hood to see if it is working properly.

THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY A

QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL

ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL

AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.

Figure 1

Figure 2

Figure 3

*Note: Sample image only. May not be actual model.

OPERATING INSTRUCTIONS

3-Speed Mechanical Control

Note: For best results, turn fan on prior to any preparation or cooking and keep fans running

while cooking. Adjust speed as needed.

To operate the fan function

•Press button to choose from speed

oQ = QuietMode™ speed

oL = Low speed

oH = High speed

•Press “OFF” to turn fan off

To operate the light function

•Press the Light Control to turn lights on and off

This manual suits for next models

Table of contents

Other KOBE Ventilation Hood manuals

KOBE

KOBE IN2636SQB-1 Troubleshooting guide

KOBE

KOBE CH0130SQB (30") User manual

KOBE

KOBE RA9230SQB Troubleshooting guide

KOBE

KOBE CHX9130SQB-1 Troubleshooting guide

KOBE

KOBE CHX3830SQBD-3 Troubleshooting guide

KOBE

KOBE CHX22 SQB-1 Use and care manual

KOBE

KOBE AMZ-CHX2030SQB-40 Troubleshooting guide

KOBE

KOBE IN28 SQB Series Troubleshooting guide

KOBE

KOBE IS2336SQ Troubleshooting guide

KOBE

KOBE CH2230SQ-1 Troubleshooting guide

KOBE

KOBE CX1830GS-8 Troubleshooting guide

KOBE

KOBE OVS-CHX8130SQB-40 Installation and operating instructions

KOBE

KOBE CH2730SQB Troubleshooting guide

KOBE

KOBE RA3830SQD Troubleshooting guide

KOBE

KOBE ISX2136SQB-1 Troubleshooting guide

KOBE

KOBE RA-094 Troubleshooting guide

KOBE

KOBE IN2636SQB Troubleshooting guide

KOBE

KOBE PREMIUM IN2630SQB-700 Troubleshooting guide

KOBE

KOBE INX2830SQH-700-1 Troubleshooting guide

KOBE

KOBE IS2036GS Troubleshooting guide

KOBE

KOBE IN26 30SQB-650-5 Series Troubleshooting guide

KOBE

KOBE RA92 SQB-1 User manual

KOBE

KOBE CH00 SQB-5 Series Troubleshooting guide

KOBE

KOBE OVS-CHX9130SQB-40 Troubleshooting guide

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual