Kobalt 3DPCWB2013 User manual
3 DRAWER
WORKBENCH
KOBALT®and the K Design®are registered
trademarks of LF, LLC. All Rights Reserved.
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
ATTACH YOUR RECEIPT HERE
ITEM # 0484712
MODEL #3DPCWB2013
Français p. 16
Español p. 31
1
AB13851
2
TABLE OF CONTENTS
Package Contents . .............................................................3
Hardware Contents . ............................................................4
Safety Information . .............................................................4
Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly Instructions . ..........................................................5
Care and Maintenance..........................................................14
Troubleshooting ...............................................................14
3 Year Limited Warranty
..............................................................
15
Replacement Parts List . ........................................................15
3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY
1L Rear leg (left) 1
2L Front leg (left) 1
3 Side panel (left) 1
4 Side frames (left & right) 2
5R Rear leg (right) 1
6R Front leg (right) 1
7 Side panel (right) 1
8L Drawer slide panel (left) 1
9R Drawer slide panel (right) 1
10 Slide support (intermediate) 1
11 Bottom frame (front & rear) 2
12 Base panel 1
13 Upper panel 1
14 Back panel 1
15L Drawer side panel (left) 3
16R Drawer side panel (right) 3
17 Drawer bottom panel (small) 2
18 Drawer front (small) 2
19 Drawer back (small) 2
20 Drawer bottom panel (large) 1
21 Drawer back (large) 1
22 Drawer front (large) 1
23L Storage cage side panel (left) 1
24L Hinge (left) 1
24R Hinge (right) 1
25 Storage cage lid
Storage cage lid drawer puller
1
26R Storage cage side panel (right) 1
27 Storage cage bottom panel 1
28 Pegboard 1
29 Light support bracket 2
30 Light 1
31 Light power cord 1
32 Wooden table top 1
33
34
Hanging hook 5
1
5R
1L
3
2L
4
15
16R
22
21
20 18
16
19
9R
10
8L
32
13
14
17 11
12 4
6R
33
15L
15L
18
7
16R
24L
23L
24R
34
26R
4
HARDWARE CONTENTS
AA BB CC
DD EE
M6x10 mm Screw
Qty. 52
M6x10 mm Screw
Qty. 12
M4x6 mm Screw
Qty. 44
M4x8 mm Screw
Qty. 2
M3.2x6 mm Screw
Qty. 14
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
DANGER: ELECTRICAL SHOCK HAZARD. Do not plug the cord into an outlet with wet
hands. Do not use this tool chest near a bathtub, shower or swimming pool. Follow this manual for
recommended usage.
WARNING: Read all safety warnings and all instructions. Failure to follow all warnings and
. Save all warnings and instructions
for future use.
WARNING: KEEP CHILDREN AWAY from item at all times.
WARNING: DO NOT stand on this product. You may fall which could cause personal injury and
product damage.
WARNING: BE CAREFUL when opening more than one drawer. The item may become
unstable and tip over causing personal injury and/or product damage.
WARNING: DO NOT step in the drawers. You may fall which may cause personal injury or
product damage.
CAUTION: DO NOT open more than one drawer at a time.
CAUTION: DO NOT mount this product on a truck bed or any other moving object.
CAUTION: DO NOT alter this product in any manner. For example, do not weld external lock bars or
attach electrical equipment.
CAUTION: The maximum weight for each drawer should NOT exceed 100 lbs.
PREPARATION
Before you begin the assembly of this product, ensure that all parts are present. Compare all parts
with the package contents list and hardware contents list. If any part is missing or damaged, do
not attempt to assemble the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Phillips Screwdriver
5
ASSEMBLY INSTRUCTIONS
Important:Do not over-tighten the screws as this may result in stripping them. After the workbench is
completely assembled, fully tighten each screw.
1. Attach the left rear leg (1L) and the left front leg (2L)
to the side frame (4) using screws (AA). On the side
frame (4), ensure the edge with the hole is facing up.
Hardware Used
AA M6x10 mm
Screw x 4
1L
AA
4
2L
1
2. Attach the left side panel (3) using screws (AA).
Hardware Used
AA M6x10 mm
Screw x 4
3
2L
1L
3
2L
AA
2
6
ASSEMBLY INSTRUCTIONS
3. Align the left drawer slide panel (8L) with the pre-
drilled holes, ensuring the slides are toward the front
of the unit. Attach using screws (EE).
Hardware Used
M6x10 mm
Screw x 6
Repeat steps 1 through 3 for the right legs (5R and
6R), right side panel (7) and drawer slide panel
right (9R).
4. Feed the power cord from the power strip portion of
the right side panel (7) through the grommet in the
right rear leg (5R).
5. Attach a bottom frame (11) to the front of the left
and right front legs (2L and 6R) using screws (AA).
Ensure the holes on the bottom frame (11) are facing
up.
Hardware Used
AA M6x10 mm
Screw x 4
EE
1L
2L
8L
4
4
EE
3
5R
6R
9R
7
4
11 6R
2L
AA
5
7
ASSEMBLY INSTRUCTIONS
6. Attach a bottom frame (11) to the front of the left and
right rear legs (1L and 5R) using screws (AA). Ensure
the holes on the bottom frame (11) are facing up.
Hardware Used
AA M6x10 mm
Screw x 4
7. Attach the base panel (12) to the bottom frames (11)
and side frames (4) using screws (AA).
Hardware Used
AA M6x10 mm
Screw x 8
8. Attach the back panel (14) to the left rear leg (1L)
and right rear leg (5R) using screws (AA).
Hardware Used
AA M6x10 mm
Screw x 4
1L
11
5R
6
AA
12
11 4
7
AA
14
5R
1L
8
AA
AA
8
ASSEMBLY INSTRUCTIONS
9. Loosely attach screws (AA) to the end of the
intermediate slide support (10). Align the screws
(AA) with the holes in the back panel (14), insert the
screws (AA) into the holes and lower the intermediate
slide support (10). Tighten the screws (AA).
Hardware Used
AA M6x10 mm
Screw x 4
10. Attach the upper panel (13) to the left front leg (2L)
and right front leg (6R) using screws (AA).
Hardware Used
AA M6x10 mm
Screw x 4
11. Secure the intermediate slide support (10) to the
upper panel (13) by inserting screws (AA) through
the slide support (10) and into the upper panel (13).
Hardware Used
AA M6x10 mm
Screw x 2
AA
10
14
9
AA
13
6R
2L
10
11
13 10
9
ASSEMBLY INSTRUCTIONS
12. Attach the small drawer front (18) to the left drawer side
panel (15L) and right drawer side panel (16R) by inserting
screws (BB) through the small drawer front (18) and into
the side panels (15L and 16R). Insert (DD) screws through
parts (15L and 16R) and into sides of drawer front (18).
Attach the small drawer back (19) to the left and right
drawer side panels (15L and 16R) by inserting screws (BB)
through the side drawer panels (15L and 16R) and into
the large drawer back (21).
Hardware Used
BB M4x6 mm
Screw x 6
DD x 4
12
13. Insert the small drawer bottom panel (17) into the
drawer assembly and attach with the screws (BB).
Note: The additional holes in the drawer bottom are
there for drainage in the event of a spill.
Hardware Used
BB M4x6 mm
Screw x 4
Repeat steps 12 and 13 to assemble the second
small drawer. Set the drawers aside. They will be
installed later in the procedure.
13
14. Attach the large drawer front (22) to the left drawer side
panel (15L) and right drawer side panel (16R) by inserting
screws (BB) through the large drawer front (22) and into
the side panels (15L and 16R). Insert (DD) screws through
parts (15L and 16R) and into sides of drawer front (22).
Attach the large drawer back (21) to the left and right
drawer side panels (15L and 16R) by inserting screws (BB)
through the side drawer panels (15L and 16R) and into
the large drawer back (21).
Hardware Used
BB M4x6 mm
Screw x 13
14
15L
16R
DD
BB
BB
18
19
17
BB
20
21
16R
15L
DD
22
DD M3.2x6 mm
Screw x 4
M3.2x6 mm
Screw
10
ASSEMBLY INSTRUCTIONS
15. Extend the slides located on the drawer slide panels
(8L and 9R) to their full extension over the drawer
rails. Align the drawer with the extended slides. Insert
the extended slides into the slide supports on both
sides of the drawer. Without exerting undue pressure
on the drawer, slowly and evenly push the drawer
into the workbench. Once inserted, completely close
the drawer to set the slides in their regular operating
position.
Note: The drawer will stop initially at the detent on the
drawer slide. Apply even pressure against the front
of the drawer to engage the detent. Do not slam
the drawer shut.
Repeat this procedure to install the other two drawers.
15
8L
16. Insert the storage cage bottom panel (27) into the
three keyhole slots on the front of the pegboard (28).
Slide the storage cage bottom panel (27) to the right
to lock in place.
27
28
16
17. Insert the left storage cage side panel (23L) into the
keyhole slot on the left side of the pegboard (28).
Slide the left storage cage side panel (23L) down
until it meets the storage cage bottom panel (27).
Repeat this step for the right storage cage side panel
(26R).
23L
26R
27
28
17
This manual suits for next models
1
Table of contents
Other Kobalt Tools Storage manuals
Popular Tools Storage manuals by other brands
Ryobi
Ryobi RWB03 Original instructions
Husky
Husky H27CH5TR4BGK Use and care guide
Scheppach
Scheppach ts 2100 Translation from original manual
Cornwell Tools
Cornwell Tools CTB360AKBK Assembly instructions
DIVERSIFIED WOODCRAFTS
DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Assembly instruction
Cassese
Cassese CS200 CART user & parts manual
Kendall Howard
Kendall Howard ESDW-9630-1000 owner's manual
Lista
Lista Align Instructions for assembly
Workzone
Workzone 99609 Assembly instructions
Stanley
Stanley STST83800-1 instruction manual
Homak
Homak PROFESSIONAL Series Owner's manual & operating instructions
Perel
Perel ROLLER SHUTTER STORAGE CABINET Assembly instructions
