Kobalt 59725 User manual
1
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m - 8 p.m., EST,
www.lowespartsplus.com.
ATTACH YOUR RECEIPT HERE
ITEM #3832633
MODEL #59725
30.5-IN 3-DRAWER
UTILITY TOOL CART
Español p. 12
KOBALT and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.
AS21264
2
PRODUCT SPECIFICATIONS
TABLE OF CONTENTS
COMPONENTS SPECIFICATIONS
Maximum load for small drawer
Maximum load for middle drawer
Maximum load for big drawer
Maximum load for bottom tray
Maximum load for top tray
Maximum total load
50 lbs.
50 lbs.
100 lbs.
100 lbs.
100 lbs.
400 lbs.
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................4
Safety Information...........................................................................................................................4
Preparation.....................................................................................................................................5
Assembly Instructions......................................................................................................................6
Operating Instructions.....................................................................................................................9
Care and Maintenance..................................................................................................................10
Warranty........................................................................................................................................10
Replacement Parts List..................................................................................................................11
PACKAGE CONTENTS
3
A
B
C
D
D
A
B
C
D
E
F
G
1
1
4
2
1
2
2
Cabinet
Side handle
Post
Beam
Bottom tray
Swivel caster with brake
Swivel caster
PART DESCRIPTION QUANTITY
E
G
F
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or operate this
product. Failure to follow may result in serious injury. Save all warnings and instructions for future
reference.
HARDWARE CONTENTS (shown actual size)
4
M8 x 11 mm
Bolt
Qty. 38+3
M8 Nut
Qty. 56+5
M8 x 15 mm
Bolt
Qty. 18+2
Lock
(Preassembled to cabinet)
Qty. 1
Key
(Preassembled to lock
mechanisms)
Qty. 2
AA BB CC
DD EE
SAFETY INFORMATION
5
• Do not stand on, step on, or alter this unit for anything outside the designed function of storage.
• When locking the product, close all drawers and the top cover completely in order for the lock
bars to work properly.
• Secure all items and lock the lid and all drawers before rolling this product. Only roll the product
short distances by using the handle provided.
• Lock wheels when the product is not being moved.
• Do not open more than one drawer at a time. The product may become unstable and tip, which
may cause personal injury or product damage.
• The metal may have sharp edges or corners. The use of protective gloves is recommended.
• Always remember to use proper lifting techniques when moving the boxed or assembled unit.
• Do not attach or mount this product to a vehicle or any other moving object. This may cause
personal injury or product damage.
• Do not exceed maximum load capacities listed in Product Specifications on Page 2, including
contents.
• When storing articles, equally distribute loads. Always balance the loads to avoid tipping. Place
heavier weight on the bottom cart when possible.
• Keep the product on level surfaces. The product may become unstable and tip if stored or moved
on an unlevel surface, which may cause personal injury or product damage.
• Do not store flammable liquids in the unit unless they are secured in an approved container.
• Do not store gasoline in the unit under any circumstances.
• Do not leave children unattended near this product. Cabinet may tip over if improperly opened.
• Always use common sense and be cautious when using this product.
CAUTION
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
It is recommended that this product to be assembled on a clean, soft surface, such as a piece of
cardboard.
Estimated Assembly Time: 45 minutes (does not include unpacking time)
Tools Required for Assembly (included): 13 mm Wrench
PREPARATION
ASSEMBLY INSTRUCTIONS
6
Hardware Used
BB x 16
M8 x 15 mm Bolt
CC x 16
M8 Nut
AA x 16
M8 x 11 mm Bolt
CC x 16
M8 Nut
1. Mount the two swivel casters with brake
(F) to the bottom of the bottom tray (E)
using four M8 x 15 mm bolts (BB) and M8
nuts (CC) per caster. The swivel casters
with brake (F) should be installed on the
same end as the side handle (B). Repeat
this process for the other swivel casters
(G) on the opposite end of the bottom tray
(E).Tighten all bolts with a 13 mm wrench.
Return the unit to its upright position.
Note: Do not over tighten the bolts.
Be sure to keep the tray on a soft surface,
such as carpeting or a piece of cardboard,
to protect them from scratches.
Hardware Used
2. Mount the four posts (C) to the bottom
tray (E) using four M8 x 11 mm bolts (AA)
and M8 nuts (CC) per post (C). Finger
tighten only.
Note: Lock 2 swivel casters to prevent it from
rolling and swiveling.
Be sure to install the posts in the direction
indicated by the arrow on the label, or the
next step will not be able to install.
Do not fully tighten bolts yet to allow for some
movement during cabinet installation.
1
2
E
G
F
C
C
E
BB
CC
CC
AA C
ASSEMBLY INSTRUCTIONS
7
Hardware Used
3. Mount the two beams (D) to four posts
(C) using eight M8 x 11 mm bolts (AA)
and M8 nuts (CC). Tighten the 8 bolts
securely.
4. Carefully and slowly lower the cabinet (A)
between the four posts (C) until the
cabinet (A) is properly secured onto the 2
beams (D) and the holes are in alignment.
Note: Lock the lid and all drawers before
operation.
This step requires at least two adults.
3
AA x 8
M8 x 11 mm Bolt
CC x 8
M8 Nut
C
C
D
D
A
D
C
C
D
4
CC
AA C
D
Hardware Used
BB x 2
M8 x 15 mm Bolt
CC x 2
M8 Nut
ASSEMBLY INSTRUCTIONS
8
Hardware Used
5. Unlock and open the lid, secure the
cabinet (A) to the four posts (C) using
fourteen M8 x 11 mm bolts (AA) and M8
nuts (CC). Do not over tighten the bolts.
6. Attach the side handle (B) to the tool cart
using two M8 x 15 mm bolts (BB) and M8
nuts (CC). Tighten all bolts securely.
Note: The side handle (B) must be installed
on the end of the tool cart with swivel casters
with brake (F).
Note: Do not install the top 2 bolts and nuts
on the side with the 2 swivel casters with
brake (F), they are for the side handle (B) in
next step. For easier assembling, screw the 2
bolts on the bottom side first.
5
AA x 14
M8 x 11 mm Bolt
CC x 14
M8 Nut
B
A
6
C
A
AA
C
C
CC
CC
BB
9
OPERATING INSTRUCTIONS
1. Using the caster brakes
To lock the swivel casters, step
down the levers marked with
ON. To unlock casters, push
down the levers marked with
OFF.
Note: Be sure to lock both swivel casters
with brake to prevent tool cart from rolling
or swiveling.
Note: Do not slide in the drawer violently
until both drawer slides are aligned
properly or it will cause damage on
drawer slide.
2. Removing the drawers
Fully empty and extend the drawer.
Depending on the side, either lift or
lower the release lever on both sides
so the slides can ride over the stops.
Pull the drawer outward until it is
released from the slides.
3. Re-inserting the drawers
Pull the slides and slide carrier out
until fully extended. Hold the slide on
the tool cart while aligning it with the
slide on the drawer. Slightly insert
one side and repeat for the other
side. Slowly push the drawer until it is
fully closed to engage the slide.
Open and close the drawer to verify
proper operation.
1
2
3
OFF
ON
10
CARE AND MAINTENANCE
3-YEAR HASSLE-FREE WARRANTY
• Keep your tool cart in good repair by adopting a regular maintenance program.
• The use of drawer liners (included) is recommended to protect the finish inside the drawers and
make the drawers easier to clean.
• Grease the casters annually using high quality bearing grease.
• Lubricate the slides semi-annually with general purpose grease or equivalent.
• Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and
water.
• Remove grease and oil with a standard nonflammable cleaning fluid.
For 3 years from the date of purchase, this product is warranted for the original purchaser to
be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period
of use.
If you think your product meets the above guarantee criteria, please call 1-888-3KOBALT, 8
a.m. – 8 p.m., EST, Monday – Sunday, or return the item to the place of purchase with a copy
of the original sales receipt. The distributor will, at its option, repair or replace the product.
This warranty gives you specific legal rights, and you may also have other rights that vary
from state to state.
This manual suits for next models
1
Table of contents
Languages:
Other Kobalt Outdoor Cart manuals
