KoamTac KDCi Safety guide

Connecting your KDCi to your iPhone/iPad/iPod Touch

Revision 1.2

koamtac.com

How to Connect your KDCi to iPhone/iPad/iPod Touch

Revision 1.2

Connecting your KDCi to your iPhone/iPad/iPod Touch

Revision 1.2

koamtac.com

press

Select

BT Config

Select

Connect Device

Select

iPhone

Select

Save & Exit

Enter the

KDC menu

Please Note:

Connect your KDCi to your iPhone, iPad, or iPod Touch

This method is recommended for first-time users or when

you are only connecting a few KDC’s.

Connecting Your KDCi to your iPhone, iPad, or iPod Touch

There are two options for Bluetooth pairing your KDCi and your iPhone, iPad or iPod

Touch. Both options will have the same result, choose an option below that best suits

you.

Option A

For laser-based models

KDC20/100/200/250/350L/410/415

iPhone

For 2D imager models

KDC30/300/350C/420/425/450

iPhone

Connect your iPhone, iPad or iPod touch from your KDCi by

scanning a special Bluetooth MAC Address barcode

This method is recommended for more advanced users or when

your application or process requires pairing one of many KDCs

to one of many iOS devices on a regular basis.

Option B

Your KDCi is shipped from the factory in iPhone mode. Both connection options within this document

require your KDCi to be in iPhone mode. If you are unsure if your KDCi has been configured in iPhone

mode, scan the barcodes below or follow the menu system for KDCi equipped option show below.

Connecting your KDCi to your iPhone/iPad/iPod Touch

Revision 1.2

koamtac.com

press

Select

BT Service

Select

Pairing

Enter the

KDC menu

For laser-based models

KDC20/100/200/250/350L/ 410/415

Pairing

Settings

3Download KTSync from iTunes at http://itunes.com/app/KTSync. Open KTSync

after it has installed and it will automatically find the KDCi and connect.

Refer to page 6 to learn more about KTSync

Tap your KDCTap Bluetooth

Complete!

2On your iOS device, go to SettingsBluetooth, find the KDCi with which you want to pair

and select it. Your KDCi and iPhone, iPad or iPod touch are now communicating with each

other.

1Put your KDCi into Pairing mode

For 2D imager models

KDC30/300/350C/420/425

Pairing

Connect your KDCi from your iPhone, iPad or iPod Touch

This method is recommended for first-time users or when

you are only connecting a few KDC’s.

Option A

Connecting your KDCi to your iPhone/iPad/iPod Touch

Revision 1.2

koamtac.com

2Create your Pairing Barcode

Symbology:Code 128

Contents: ^FNC365<BluetoothAddress>

Options: includetext parsefnc

Choose

881FCALK15LM

^FNC365

includetext parsefnc

•Go to http://www.terryburton.co.uk/barcodewriter/generator/

•Enter the following information:

•Click Make Barcode

•Download the image in EPS, PNG or JPEG format

Replace highlighted text

with your Bluetooth Address

from Step 1. Remove the

colons and < > marks as

shown.

Settings

Tap on General Tap on About Bluetooth address

1Find the Bluetooth MAC Address of your iPhone, iPad or iPod touch

Connect your iPhone, iPad or iPod touch from your KDCi by

scanning a special Bluetooth MAC Address barcode

This method is recommended for more advanced users or when

your application or process requires pairing one of many KDCs

to one of many iOS devices on a regular basis.

Option B

Connecting your KDCi to your iPhone/iPad/iPod Touch

Revision 1.2

koamtac.com

4Pair your KDCi to iOS by scanning the Pairing bar code

Tap on Bluetooth Scan the

Pairing

Barcode

Settings

Tap on Pair

3Print your Pairing bar code

2D image-based barcode readers such as the KDC300, KDC420 series, and KDC350C models

will read a printed barcode OR directly from an LCD screen.

Laser scanners, such as the KDC20, KDC200, KDC410 series, and KDC350L models are not

designed to read from a screen and will only read the printed barcode.

Connect your iPhone, iPad, or iPod touch from your KDCi by

scanning a special Bluetooth MAC Address barcode

Option B

5Download KTSync from iTunes at http://itunes.com/app/KTSync. Open KTSync

after it has installed and it will automatically find the KDCi and connect.

Refer to page 6 to learn more about KTSync

Complete!

Attach this to

your iPhone/iPad

for fast, easy

future connections

Connecting your KDCi to your iPhone/iPad/iPod Touch

Revision 1.2

koamtac.com

How to Reconnect

First, let’s make sure your KDCi is still listed as a device in your iPhone, iPad, or iPod touch.

YOU’RE ALL SET! DON’T WORRY.

Your iPhone, iPad or iPod touch knows

your KDCi is out there but you’ll need to

pair them before they can talk.

Your KDCi can initiate reconnection in THREE ways.

Option 1Press the <UP> button on your KDCi

Option 2

Enable “Menu BT Config AutoReconnection”

Attention Experts! When the KDCi goes to sleep, it will first check to

determine if Bluetooth is disconnected; then it checks if Bluetooth was

connected before or after reset. If these conditions are met, the KDCi

tries to reconnect to your iPhone, iPad, or iPod touch 10 times.

Option 3

If your KDCi shows as “Not

Connected”, your device can be

reconnected by pressing one button.

Scan your “Pairing” bar code

Settings

Step through one of the two

Pairing options on Page 1.

Simply press the <UP> button

on your KDCi

Make sure

Bluetooth

is ON

Connecting your KDCi to your iPhone/iPad/iPod Touch

Revision 1.2

koamtac.com

SDK Options

This option is enabled by adding the “UIBackgroundModes” key into the application Info.plist

and setting its value to “external-accessory”.

For more information, please see Apple’s developer documentation at the following link:

http://developer.apple.com/library/ios/#documentation/iPhone/Conceptual/iPhoneOSProgrammingGuid

e/ManagingYourApplicationsFlow/ManagingYourApplicationsFlow.html#//apple_ref/doc/uid/TP40007072

-CH4-SW24

The external accessory framework is suspended to support communication between iOS and the

KDCi when the application is in the background or the iOS device is locked. As a result of this

feature, the KDCi has difficulty communicating with the iOS device. To avoid this, it is

recommended to use the option to enable the iOS external accessory framework to maintain

communications with the KDCi while iOS is locked or the application is in background mode

from within your iOS App.

Scanning with KTSync

Download KTSync from iTunes at http://itunes.com/app/KTSync. Open KTSync after it has

installed and it will automatically find the KDCi and connect.

Use KTSync for iOS to test the settings of your KDCi device with iOS and prove proper

functionality as you develop your App with the KoamTac iOS SDK.

KoamTac KDCi Safety guide

Popular Barcode Reader manuals by other brands