Klimawent GEPARD-1000 User manual

15.03.2018 Portable exhaust extractor GEPARD-1000

Use and Maintenance Manual

Portable exhaust extractor

GEPARD-1000


 Portable exhaust extractor GEPARD-1000 15.03.2018 
 
 Contents: 
Introductory Remarks......................................................................... 3 
Application ......................................................................................... 4 
Reservations of Producer .................................................................... 4 
Technical Data.................................................................................... 4 
Structure and Function....................................................................... 5 
Assembly and Start-up ........................................................................ 7 
Operational Use .................................................................................. 8 
Troubleshooting Guide ........................................................................ 8 
Maintenance and control .................................................................... 8 
Occupational Health and Safety .......................................................... 9 
Transport and Storage ........................................................................ 9 
Terms of warranty .............................................................................. 9 
Sample of Declaration of Conformity .................................................. 10

15.03.2018 Portable exhaust extractor GEPARD-1000

1. Introductory Remarks

The purpose of the present User’s Manual is to supply User with directions within the range of

application, installation, start-up and the operational use of the GEPARD-1000 portable exhaust

extractor.

Installing, start up and operational use are exclusively admissible after getting acquain-

ted with the contents of the Use and Maintenance Manual.

With regard to continuity of work carried on improvement of our products, we reserve for our-

selves the revision possibility of the draft and technological changes improving their functional

features and safety.

The construction of the GEPARD-1000 portable exhaust extractor meets the requirements of the

current state of technology as well as the safety and health assurances included in:



2006/42/EC Machinery Directive of the European Parliament and of the Council of 17 May,

2006 on machinery –amending the 95/16/EC (recast) /Journal of Laws EC L157 of 09.06.2006, page 24/



2014/35/EC Directive of the European Parliament and of the Council of 26 February, 2014

on the harmonisation of the laws of the Member States relating to the making available on the

market of electrical equipment designed for use within certain voltage limits.

/Journal of Laws EC L96 of 29.03.2014/

The appliance meets the requirements included in:



2009/125/EC (ErP) Directive of the European Parliament and of the Council

of October 21th, 2009 establishing a framework for the setting of ecodesign requirements

for energy-related products / Journal of Laws L 285 of 31.10.2009 /



327/2011 (EU) Regulation of March 30th, 2011 on implementing the 2009/125/EC Directive

of the European Parliament and of the Council with regard to ecodesign requirements

for fans driven by motors with an electric input power between 125W and 500 kW

/ Journal of Laws L No. 90 of 06.04.2011 /

The device has been constructed and produced on the basis of following harmonized standards:



PN-EN ISO 12100:2012

–

“Safety of machinery. Basic concepts, general principles

for design. Risk assessment and risk reduction”.



PN-EN 60204-1:2010

–

“Safety of machinery. – Electrical equipment of machines.

Part 1: General requirements”.



PN-EN 60034-1:2011E

–

“Rotating electrical machines –Part 1: Rating and performance”



PN-EN ISO 13857:2010

–

“Safety of machinery. Safe distances to prevent hazard

zones being reached by upper and lower limbs”.

Portable exhaust extractor GEPARD-1000 15.03.2018

2. Application

GEPARD portable extractors have been constructed for removal the exhaust gas emitted from

the exhaust pipe of personal cars and medium-size vehicles, during the engine tests, diagnostics,

adjustment etc. GEPARD-1000 portable extractor is designed for personal cars,

3. Reservations of Producer

Producer accepts no liability for any consequences following from the operational use that

is in contradiction to the purpose of application.

It is unacceptable to install on the device structure any additional elements not belonging to

its normal construction or accessory set.

Any structural changes or modification of the device, carried out by User on one’s own are

not permitted.

Protect the housing from mechanical damage.

The appliance is not appropriate for conveying the air that is contaminated with a mix-

ture of flammable substances, in form of gas, vapour, mist or dust, which would cre-

ate explosive atmosphere with the air.

Do not use the device for conveying the air containing viscous impurities that could accumu-

late (build up) on the device surface, especially on the impeller.

Neither use it for forwarding the air with aggressive pollutants which will destructively effect

the device structure.

During the operational use, maximum impeller rotations should not exceed the nominal rotations.

Producer is not responsible for wounds, injuries, body laceration experienced by User or per-

sonnel during the improper operational use.

4. Technical Data

Table No.1

Volume flow

Supply voltage

Motor rate

Weight

Diameter

of the outlet

[m³/h]

[V]

[kW]

[kg]

[mm]

GEPARD-1000

1000

230 / 50Hz

0,37

125

CAUTION:

–

admissible time of continuous run of the engine (at maximum rotations) is 60 seconds.

–

admissible total weight of the serviced car: GEPARD-1000 –up to 3,5t

15.03.2018 Portable exhaust extractor GEPARD-1000

5. Structure and Function

The portable exhaust extractor consists of a radial fan in a metal housing placed on a framework.

The suction tube is eccentrically fastened to the housing and it provides contactless connection

with the vehicle’s exhaust pipe (whereby the exhaust pipe can be at various heights). Due to the

S-shape of the suction tube, it can be adjusted to the height of the vehicle exhaust pipe.

It is important to fasten a flexible hose to the outlet connection to discharge the exhaust volume

in shortest way outside the building. As connection (of the GEPARD-1000 extractor) with the po-

wer supply system, use the ŁS motor switch.

The appliance is equipped with a 5-metre-long power supply cable ended with a plug.

Fig. No.1 –Structure and Dimensions –GEPARD-1000

Portable exhaust extractor GEPARD-1000 15.03.2018

Flexible hoses

Table No.2

View

Type

Diameter

[mm]

Temperature range

of the conveyed air

[oC]

Remarks

G-EX1-125

G-EX1-200

125

200

-20 do +150

(for short time +200)

MCS-125

MCS-200

125

200

-20 do +90

(for short time +110)

ST/MP-125

ST/MP-200

125

200

-30 up to +120

STX-125

STX-200

125

200

-30 do +170

(for short time +220)

* Upon fresh air supply of approx. 50%

External plastic spiral. Walling of polyester neoprene coated fabric. Resistant to per-

manent deformation.

External zinc-coated steel spiral. Hardly flammable walling of PVC coated glass-fibre.

Without external spiral. PVC coated glass fabric wound on an internal steel spiral.

Without external spiral. Steel wire inside the hose wall. Reinforced with a fabric braid.

Walling is hardly flammable and protects from rubbing (friction) due to smooth surface.

15.03.2018 Portable exhaust extractor GEPARD-1000

6. Assembly and Start-up

The device attachment consists in placing it near to the vehicle exhaust pipe and turning

the eccentric suction tube to adjust the tube height with the vehicle exhaust pipe. To lead

(discharge) the exhaust gas volume outside the building it is important to fasten a flexible

hose, whereby the hose end must be placed outside the building.

Sorts and types of hoses is specified in Table No.2.

All the activity connected with power supply ought to be carried out

by an authorized person with testified electrical qualifications and according to the

Connection Diagram in Fig. No.3.

Fig. No.3 –Connection Diagram –GEPARD-1000

Portable exhaust extractor GEPARD-1000 15.03.2018

7. Operational Use

Construction and the robust execution of the extractor ensures reliable function without the

preliminary adjustment and continuous routine technical supervision.

In situations when any improper function or failure is by noise or visually noticed, disconnect

the extractor from the power supply, submit it to technical revision and remove the failures.

Typical malfunctions and their reasons are described in Section 8.

8. Troubleshooting Guide

Table No.3

Problem

Possible reason

Corrective action

Significant decrease

Obstacle objects/impurities

Spot and remove the obstacle

in the intake volume air

reducing the air flow depo-

sited in the inlet tube.

Sudden vibrations of the

Obstacle objects/impurities

Switch off the motor from the

extractor

reducing the air flow deposi-

power supply system, disconnect

ted / got stuck within the

the hose from the outlet and remo-

impeller

ve the obstacle object.

The impeller is faulty

Replace the impeller for a new one

9. Maintenance and control

Due to construction, the device can be used without continuous routine everyday technical

supervision. In case when any improper function or failures are visually or by noise spotted

–carry out revision.

Once a year of operational use, submit the extractor to technical revision during which check

following aspects:

●

Check the impeller state –if excessive vibrations are occurring (due to the impeller failure)

–submit the impeller to a corrective balancing.

●

The motor ought to be examined according to the operational regulations of electrical ap-

pliances.

●

During the maintenance, check the mechanical and electrical connections.

●

Every 2 years of operational use, examine the fan motor –insulation resistance of the win-

dings, grounding resistance, state of the bearings, if necessary replace the bearing for new

of the same type.

●

Every 3 months –put some lubrication grease on the frictional rotary connector of the suc-

tion tube. If the suction tube is turning too easily –tighten up the adjustment nuts M6 on

the mounting flange.

Technical revision ought to be executed exclusively after the appliance

is disconnected from the power supply system.

15.03.2018 Portable exhaust extractor GEPARD-1000

10. Occupational Health and Safety

Start up and the operation use are only admissible after getting acquainted with the contents

of the present manual. For safety reasons, the device ought to be connected to the electrical

power system according to the enclosed diagram and in compliance with the valid regulations

within the range of personal protection from electrical shock and protection from short-circuit-

and overload effects. Safety regulations are included in the standard PN-E-05009 –“Electrical

installations of buildings”.

Any repair and technical revisions ought to be executed exclusively after

the extractor is switched off and disconnected from the power supply system. While star-

ting, do not put your hand and other objects into the fan outlet orifice. The extractor can

be started only the discharge hose is fastened to the fan outlet.

11. Transport and Storage

GEPARD portable extractors are placed on a pallet and wrapped in foil. For the time of transport

on a pallet, the extractor ought to be fastened to the pallet and protected from overturn and slide.

The device ought to be stored in a dry and well ventilated room. Do not put one extractor on top

of another one.

12. Terms of warranty

The period of warranty for the purchased device is indicated in the “Card of Warranty”.

The warranty does not comprise:

●

mechanical damage and dysfunctions caused by User,

●

device failures caused during use which was in contradiction with the purpose of operational

use and the present Use and Maintenance Manual,

●

damages being cause during improper transport, storage or incorrect maintenance,

Infringement of the Section 3 “Reservations of Producer” of the Use and Maintenance

Manual and especially modifications undertaken by User on one’s own shall cause the

loss of warranty validity.

Portable exhaust extractor GEPARD-1000 15.03.2018

13. Sample of Declaration of Conformity

Declaration of Conformity EC No. ……………..

Manufacturer (eventually the authorized representative / importer):

name: KLIMAWENT S.A.

address: 81-571 Gdynia, ul. Chwaszczyńska 194

A person, authorized for issuing the technical documentation:

hereby declares that the appliance:

name: Portable exhaust extractor

type/model: GEPARD-1000

serial number: …………………………….. year of production: ………………………..

meets the requirements of the subsequent European Directives:



2006/42/EC Machinery Directive of the European Parliament and of the Council of 17 May,

2006 on machinery –amending the 95/16/EC (recast) /Journal of Laws EC L157 of 09.06.2006, page 24/



2014/35/EC Directive of the European Parliament and of the Council of 26 February, 2014

on the harmonisation of the laws of the Member States relating to the making available on the

market of electrical equipment designed for use within certain voltage limits.

/Journal of Laws EC L96 of 29.03.2014/

The appliance meets the requirements included in:



2009/125/EC (ErP) Directive of the European Parliament and of the Council

of October 21th, 2009 establishing a framework for the setting of ecodesign requirements

for energy-related products / Journal of Laws L 285 of 31.10.2009 /



327/2011 (EU) Regulation of March 30th, 2011 on implementing the 2009/125/EC Directive

of the European Parliament and of the Council with regard to ecodesign requirements

for fans driven by motors with an electric input power between 125W and 500 kW

/ Journal of Laws L No. 90 of 06.04.2011 /

The device has been constructed and produced on the basis of following harmonized standards:



PN-EN ISO 12100:2012

–

“Safety of machinery. Basic concepts, general principles

for design. Risk assessment and risk reduction”.



PN-EN 60204-1:2010

–

“Safety of machinery. – Electrical equipment of machines.

Part 1: General requirements”.



PN-EN 60034-1:2011

–

“Rotating electrical machines –Part 1: Rating and performance”



PN-EN ISO 13857:2010

–

“Safety of machinery. Safe distances to prevent hazard

zones being reached by upper and lower limbs”.

……………………………

place, date

signature of authorised person

name, surname, function

of the signatory

KLIMAWENT S.A.

District Court Gdańsk-Północ

NIP: 958 159 21 35

Supported Employment Enterprise

in Gdańsk, VII Wydział Gospodarczy

REGON: 220631262

81-571 Gdynia, ul. Chwaszczyńska 194

of the National Register of Court

Bank Account: Santander Bank Polska S.A.

phone: +49 58 829 64 80

KRS 0000308902 company stock

56 1500 1025 1210 2007 8845 0000

email: klimawent@klimawent.com.pl

13.779.200 zł paid in total

www.klimawent.com.pl

Table of contents

Other Klimawent Fan manuals

Klimawent

Klimawent BULLET-160-N User manual

Klimawent

Klimawent WPA-E-N/Ex Series User manual

Klimawent

Klimawent WPA-D-N Series User manual

Klimawent

Klimawent WPA-5-D-N/Ex User manual

Klimawent

Klimawent SMART-EC-1300 User manual

Klimawent

Klimawent WPA-P-N User manual

Klimawent

Klimawent WPA-CHEM-160/3000 User manual

Klimawent

Klimawent UFO-A-5000 User manual

Klimawent

Klimawent WPA-3-P-1-N User manual

Klimawent

Klimawent ROL-GOL User manual

Klimawent

Klimawent SMART-EC-4000 User manual

Klimawent

Klimawent SMART-SN User manual

Klimawent

Klimawent WPA-P-N/Ex User manual

Klimawent

Klimawent ERGO-FLEX LUX User manual

Klimawent

Klimawent WP-11/Ex User manual

Klimawent

Klimawent PODRYW-N User manual

Klimawent

Klimawent SMART-N Series User manual

Klimawent

Klimawent STRONG-5000-S User manual

Klimawent

Klimawent WPA-14-S-N User manual

Klimawent

Klimawent WPA-S-N Series User manual

Klimawent

Klimawent SPARK-CHEM-160/1500/Ex User manual

Klimawent

Klimawent WP-xxx-D/Ex Series User manual

Klimawent

Klimawent SMART-EC-6200 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual