Kleenmaid KCRHSCK90 Installation guide

cooking collection

Instructions for use and warranty details



Model No.:KC

Dear Customer,

Thank you and congratulations for choosing

Kleenmaid.

Your new appliance has been designed

and meticulously tested to ensure that it

meets all your culinary requirements, and

has been carefully manufactured using top

quality materials to give you years of reliable

performance.

For best results, carefully read the instructions

on how your new appliance is to be installed.

Correct installation will avoid delays and

unnecessary service call costs.

Once installation is complete, please read this

instruction manual carefully and get to know

the controls and the features of your new

Kleenmaid appliance. These simple instructions

will enable you to achieve excellent results from

the very ﬁrst time you use it.

Again, congratulations and thank you for

choosing The Best You Can Own.

KLEENMAID

can be installed on walls between 203mm and 229mm

tall.

610mm.

1. Read this manual carefully and completely.

2. The range hoods conform to related appliances standards. Please check your local building codes for any

additional requirements.

3. The appliance has been manufactured as class I, there?fore ground connection is necessary. The range hood

must be installed so that that the plug is easily accessible.

Before You Start...

Remove the packaging with the product in place. Cut off the packing ribbons and carefully cut open the packaging

(do not cut too deeply), remove the packaging. Check that the product is free from transport damage.

shall be reported immediately to the carrier or seller. Any damage

Damage, faults and missing parts must be reported immediately

to the seller.

UnpackingUnpacking

2. Install a roof or wall cap. Connect a 150mm round metal duct to the cap

and work backwards toward the hood. Ensure joints are completely sealed

with duct tape.

1. Plan where the ductwork will run between the hood and the outside.

The hoods exhaust vertically but can be ducted to the rear behind the

chimney duct through an outside wall or vertically up through the ceiling

to the roof. A short straight duct run will produce the most air flow.

Length and elbows will reduce the efficiency of the blower.

1. Before mounting the hood, plug in and test all functions for proper operation.

2. Removed the filters from the bottom of the hood to prevent damage during

the installation.

3. With assistance, hold the hood temporarily in position ensuring the bottom is

above the minimum clearance for the cooking surface. Mark on the wall the

holes for the two mounting screws.

4. Drill the holes (A) at the distances indicated. Use the appropriate screws and

screw anchors for your wall type (e.g. reinforced concrete, drywall, etc.).

If necessary, prepare back wall with cross framing for secure installation.

5. Mount the hood on the wall screws. Align it in a horizontal position relative to

cabinets. When the hood has been adjusted, secure unit by tightening screws (A).

6. Connect a 150mm aluminum duct tube (not included) to the exhaust piece using

duct tape on all seals. (C)

1. Carefully loosen but do not separate the telescopic chimney duct pieces.

2. Arrange the electrical power supply within the dimensions of the decorative

chimney duct.

3. Adjust the width of the support bracket to match the upper duct. Fix it to the

ceiling using the screws (B) so that it is centered in line with your hood and

at a distance from the ceiling indicated.

FixingtheDecorativeChimney

Flue

InstallingtheDuctwork

FixingtotheWall

Note: The above installation guideline is for reference only, please contact your local dealer for installation services.

When mounting hood on the wall,the level can be adjusted by turning the two screws on the motor housing.

InstallingGuideline

Leveling

Device

The cooker hood can be installed in the following ways:

Circulating indoor air (A)

Outdoor venting (B)

Description of symbols

Using the dial control

- Push the rotary dial, the LED lights will illuminate

hood will select that setting after the indicating light illuminates twice.

- Push the rotary switch again at any setting to switch the hood off.

off after 3 min.

Description of symbols

Using the dial control

- Push the rotary dial, the LED lights will illuminate

- Turning the rotary switch clockwise or counter-clockwise, stop the indicating light at the setting you want to select. The

hood will select that setting after the indicating light illuminates twice.

- Push the rotary switch again at any setting to switch the hood off.

- When the indicator light stops at the ‘timer’ setting, the hood will be functioning at speed III and then automatically switch

off after 3 min.

speed I

speed II

speed III

speed I + light

light

speed II + light

speed III + light

3 min. delay-off at speed III

1. For optimum performance in removing cooking odors, it is recommended that you turn on your range hood prior

to cooking and you leave it operating for 15 minutes after cooking.

2. Clean the surfaces of the range hood regularly using a non-abrasive detergent.

3. The anti-grease filters capture the grease particles suspended in the air. They will accumulate grease and dirt

depending on the frequency of the use of your range/cook top.

4. In order to prevent a fire hazard, it is recommended that you clean the aluminum filter at least every 2 months

Operations

Other manuals for KCRHSCK90

Table of contents

Other Kleenmaid Ventilation Hood manuals

Kleenmaid

Kleenmaid RH4 Installation guide

Kleenmaid

Kleenmaid RH24X Installation guide

Kleenmaid

Kleenmaid RHUC60 Installation guide

Kleenmaid

Kleenmaid Concave Installation guide

Kleenmaid

Kleenmaid RHGV90 Installation guide

Kleenmaid

Kleenmaid RH17 Installation guide

Kleenmaid

Kleenmaid KEY 60 Installation guide

Kleenmaid

Kleenmaid RHGV90 Installation guide

Kleenmaid

Kleenmaid RH1A Installation guide

Kleenmaid

Kleenmaid FREESPOT100 Installation guide

Kleenmaid

Kleenmaid RH12 Installation guide

Kleenmaid

Kleenmaid RH4X Installation guide

Kleenmaid

Kleenmaid RH14 Installation guide

Kleenmaid

Kleenmaid RHSOTF60 Installation guide

Kleenmaid

Kleenmaid RH9 Installation guide

Kleenmaid

Kleenmaid RHSOR61 Installation guide

Kleenmaid

Kleenmaid RHSOG91 Installation guide

Kleenmaid

Kleenmaid RH8 User manual

Kleenmaid

Kleenmaid RHUC61 User manual

Kleenmaid

Kleenmaid TGLASS90 Installation guide

Kleenmaid

Kleenmaid RHUC92 Installation guide

Kleenmaid

Kleenmaid KCRHSO6010 User manual

Kleenmaid

Kleenmaid RHWMDB40 Installation guide

Kleenmaid

Kleenmaid RHU60 Installation guide

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual