Kisai Xtal User manual
Button AUSB Port
Button B
INSTRUCTION MANUAL
Xtal has 2 difficulty settings for telling the time [Regular] & [Cryptic]
You may also choose to display the time in [12hr] or [24hr] modes.
The default setting is [Cryptic] [12hr].
See section 3 “How to set the time” to change your preference.
Press button A once to display the time.
Digits 0-9 in regular difficulty.
09:34 PM
(12hr time mode)
20:56
(24hr time mode)
I. Regular difficulty mode
1. How to read the time
•
Note: The time will be displayed for 7 seconds.
Digits 0-9 in cryptic difficulty.
Hint: It’s almost the same as regular, but the middle line is
missing. (exception, number 8)
12:36 AM
(12hr time mode)
23:45
(24hr time mode)
II. Cryptic difficulty mode
April 18th = 04 18
(Regular mode)
December 24th = 12 24
(Cryptic mode)
I. Reading the date
2. How to check the date & alarm
Press button A repeatedly to change between Time, Date
& Alarm.
Press button A twice to go directly to date mode.
The icon will be displayed.
Note: The date is displayed as MONTH (1-12) followed by DAY (1-31).
•
•
Time Date Alarm
Note: The time, date or alarm will be displayed for 7 seconds.
Date icon
06:45
(Cryptic mode)
08:30 PM
(Regular mode)
II. Reading the alarm
Press button A three times to go directly to alarm mode.
The icon will be displayed.
•
Alarm icon Alarm icon
PM icon Alarm [ON] icon
Note: after 7 seconds of inactivity setting mode will deactivate.
3. How to set the time and animation
The hour digits will be flashing.
Press button A to increase the hour.
Press button B to accept.
The minute digits will be flashing.
Press button A to increase the minutes. (hold A to increase quickly)
Press button B to accept.
While the time is displayed, press & hold button B.
The hour digits will begin flashing & the icon
will be lit.
You will be asked to set the following options in sequence.
•
•
•
•
•
•
•
•
•
Hours Mins 12hr/24hr Difficulty Animation
I. Setting the hour
II. Setting the minutes
Hours flashing
PM icon SET icon
The display will flash the current time mode [12] or [24].
Press button A to change the mode.
Press button B to accept.
The display will flash the current time in either [Regular]
or [Cryptic] mode.
Press button A to change between difficulty modes.
Press button B to accept.
•
•
•
•
•
•
III. Setting 12hr / 24hr
IV. Setting the difficulty mode
24hr mode
flashing
SET icon
Press
[Regular] [Cryptic]
Animation mode can be either ON or OFF.
When ON the watch will animate the display every 15 minutes
between 6pm and midnight.
There are 6 different animation patterns to choose from.
The display will show the current animation setting
Press button A to change the setting.
Press button B to accept & finish.
•
•
•
V. Setting the animation
Press
[Animation OFF] Select various patterns
Hint: When setting the watch, you may skip each stage by
pressing B. This way you can easily skip though to the part you
want to change & then skip to the end.
4. How to set the date
Note: after 7 seconds of inactivity setting mode will deactivate.
While the date is displayed, press & hold button B.
The year digits will begin flashing & the &
icons will be lit.
•
•
The month digits will be flashing.
Press button A to increase the month. (1-12)
Press button B to accept.
The year will be flashing.
Press button A to increase the year. (hold A to increase quickly)
Press button B to accept.
•
•
•
•
•
•
II. Setting the month
I. Setting the year
Month flashing
Year flashing
Date icon
Date icon
SET icon
SET icon
Table of contents
Other Kisai Watch manuals
Kisai
Kisai MAZE User manual
Kisai
Kisai 3D Unlimited User manual
Kisai
Kisai ADJUST User manual
Kisai
Kisai Radioactive User manual
Kisai
Kisai Blade User manual
Kisai
Kisai Quasar User manual
Kisai
Kisai Katana User manual
Kisai
Kisai Stencil User manual
Kisai
Kisai Satellite-X User manual
Kisai
Kisai ONLINE User manual
