KinAn DPU202 User manual
USB3.0 2-Port DisplayPort
KVM switch
www.kinankvm.com
@All right reserved by Shenzhen Kinan Technology Co., Ltd.
Date：2022/03/03
Version: V1.0
DPU202 User Manual
- 1 -
User Notification
• All information, documents and specifications contained in this
manual are subject to change without notice.
• The manufacturer does not make any express or implied statements
or guarantees regarding the contents of this document, especially for
marketability or suitability for any specific purpose. Any manufacturer’s
equipment described in this manual is sold or licensed as is.
• If the equipment is artificially damaged after purchase, the buyer (not
the manufacturer, its distributor or dealer) shall bear all necessary
maintenance, repair costs and all costs of any incidental or indirect
losses caused by equipment defects.
•The manufacturer of this device is not responsible for any radio and
television interference caused by unauthorized modifications to this
device. The user is responsible for correcting such interference.
•If the correct operating voltage setting is not selected before
operation, the manufacturer is not responsible for any damage
caused by the operation of the equipment. Please make sure the
voltage setting is correct before use.
DPU202 User Manual
- 2 -
Package Contents
1× DPU202 KVM switch
1× Remote switch cable
3× DP cable
2× USB3.0 cable
2× Audio/Microphone cable
1× Power adapter
1× User Manual
• Please check and make sure that all components are present and not damaged during
transportation.
• If you have any questions, please contact us.
• Read this manual carefully, and follow the installation and operation to prevent damage to
this device or any equipment connected to this device.
DPU202 User Manual
- 3 -
Content
User Notification....................................................................................................... 1
Package Contents.......................................................................................................2
Overview....................................................................................................................4
Product Features.................................................................................................... 5
Required equipment.............................................................................................. 6
Components...............................................................................................................7
Front panel............................................................................................................. 7
Back panel.............................................................................................................. 8
Hardware Settings..................................................................................................... 9
Installation guide....................................................................................................9
Connection diagram.............................................................................................10
Hotkey Operation.................................................................................................... 11
Specifications........................................................................................................... 12
Frequently Asked Questions................................................................................... 13
DPU202 User Manual
- 4 -
Overview
The DPU202 is a 2-port ultra-high-definition KVM switch that allows users to switch
between two DisplayPort computers using a set of USB keyboard and mouse. Its input and
output support DisplayPort1.2 interface. Provides 1 USB3.0 hub and 2.1 channel audio,
supporting rich bass surround sound. Supports 4K UHD @ 60 Hz and 4K DCI @ 60Hz
resolutions to display vivid HD images while delivering premium sound for music, movies
and games.
The DPU202 supports front panel button, hotkey and remote switch cable switching. It has
a built-in USB 3.0 hub to connect USB peripherals. It supports display dynamic
synchronization, which can optimize the screen display resolution, reduce the time for
switching ports, and ensure that the screen can maintain the original display state when
switching between different ports. Supports locking audio, USB HUB signals to one port.
This eliminates the need to purchase separate USB hubs or stand-alone peripheral sharers -
such as print servers, modems, etc.
The DPU202 switch combines Ultra HD 4K resolution, USB 3.0 hub and friendly operation to
provide innovative desktop KVM switching technology.
DPU202 User Manual
- 5 -
Product Features
A set of USB keyboard and mouse controls two DisplayPort computers.
Support DisplayPort1.2 input and output.
Support display dynamic synchronization, which can optimize the screen display
resolution, reduce the time for switching ports, and ensure that the screen can
maintain the original display state when switching between different ports.
Supports 4K UHD (3840 x 2160 @ 60 Hz) and 4K DCI (4096 x 2160 @ 60Hz) Ultra HD
resolutions.
Switch between computers via front panel buttons, keyboard hotkeys, remote switch
cable.
Provides a USB 3.0 hub.
Supports audio, USB HUB signal is locked to one port.
Compatible with DisplayPort 1.2, HDCP 2.2.
Supports DisplayPort audio.
Support high quality 2.1 channel surround system.
Hot-pluggable—adding or removing a computer without powering down the
computer.
Automatic scan mode for monitoring all computers.
DPU202 User Manual
- 6 -
Required equipment
Refer to the table below to prepare the equipment and cables required for the
configuration.
DPU202
Console
A DisplayPort monitor
An USB mouse
An USB keyboard
Microphone and Speaker
Computer
(The following
equipment is required
on each computer)
A DP port
An USB Type-A port
Audio and Microphone Ports
Cable
To ensure video quality, we recommend only
using the KVM cable included in the device
package.
Notice:
1. To ensure that the computer's operating system is supported. For more information, see
Operating Systems.
2. The display effect of the monitor is affected by the quality of the computer's graphics
card. High-quality computers are recommended.
3. The quality of the monitor is affected by the quality of the cable. We recommend a total
length of no more than 3.3 meters from the source to the display (1.5 meters between the
computer and the KVM switch. The distance between the KVM switch and the display is 1.8
meters). If you need additional cables, please contact us.
Operating system
The supported operating systems are shown in the following table:
OS
windows
Linux
Mac
DPU202 User Manual
- 7 -
Components
Front panel
Number
Function
Description
1
Switch button
Press the button to switch to another port
2
Port 1 indicator
When switching to port 1, the light is on
3
Port 2 indicator
When switching to port 2, the light is on
4
Remote switch port
Remote control switching cable can be
connected to this port for switching
DPU202 User Manual
- 8 -
Back panel
No.
Function
Function description
1
Power input
Connect the 12V power supply here
2
USB HUB port
USB peripherals (printers, scanners, drives, etc.)
plug into this port
3
Audio output and
microphone input
Connect your speakers and mic here
4
USB HID port
Connect USB keyboard and USB mouse
5
Audio input and
microphone output
Connect to the computer's audio and
microphone connectors
6
USB input
Connect your computer to the device using a
USB cable
7
DP output
Connecting a DP monitor
8
DP input
Connect to the computer's DP display port
DPU202 User Manual
- 9 -
Hardware Settings
1.
To prevent damage to the device from electrical surges or static
electricity, it is important that all connected devices are properly
grounded.
2.
Make sure that all equipment connected to this installation is
powered off. You must unplug all computers that have a
"keyboard power on" feature.
Installation guide
To install the device, refer to the installation diagram on the next page and do the following:
1. Connect a monitor to the DP port on the rear panel of the device, and power on the
monitor (Fig. ①).
2. Plug the microphone and speakers into the audio ports on the rear panel of the device
(Fig. 2).
3. Plug the DP cable into the KVM port of the switch, and then plug the USB cable and
microphone/speaker cable into the corresponding sockets (Figure ③).
4. Plug the other end of the microphone/speaker cable into the corresponding port on the
computer (Figure ③).
5. Plug the other end of the DP cable and USB cable into the corresponding ports on your
computer. Install another computer and repeat steps 3, 4 and 5 (Figure ③).
6. Plug the USB keyboard and mouse into the USB HID port on the rear panel of the device
(Figure ④).
7. (Optional) Plug the USB peripheral device into the USB peripheral port (Figure ⑤).
8. Plug the power adapter cable into the switch's power jack (Fig. ⑥).
9. Power on the KVM Switch.
Table of contents
Other KinAn Switch manuals
