KHS Easy 24 User manual
E-BIKE
Easy 24
Envoy 200
Extended 2.0
Owner's Manual
BATTERY INSTALLATION INSTRUCTIONS
3
21
LOCKUNLOCK
1
Press the switch the 'O'side to turn the battery OFF.
Make sure the key is in the unlock position.
With one hand holding the end of the battery and the other
hand holding the end of the rear rack, slide and push the
battery all the way into the battery rack.
Lock the battery with the key. Failure to lock the battery
can result in inconsistent power while riding.
*The key is only for locking and unlocking the battery.
When in “locked” position, don’t leave the key in the key way.
Remove the key and keep it with the bike to prevent its loss.
We recommend keeping the spare key with the charger.
1
2
3
4
4
Press the switch to the 'O'to turn the battery OFF.
Insert the key into the battery key way. Turn counterclockwise to unlock the battery.
With one hand holding the end of the rear rack and the other hand holding the end of the
battery, pull the battery backwards away from the bicycle to remove the battery.
BATTERY REMOVAL INSTRUCTIONS
For safety reasons and to meet regulation of international freight shipping, the lithium-ion battery
was only partially charged, before being placed in sleep mode.
Please fully charge the battery BEFORE the very first use. See page 4.
Carefully read and follow all instructions and guidelines in this manual.
1
2
3
2
1
2
3
Make sure the key is in the locked position and
the battery is secure and stable in the rack.
Once locked, pull out the key for safekeeping.
We recommend keeping the spare key with the
charger.
Turn the battery power switch ON by turning it
to the ( ) side.
TURNING THE BATTERY ON
1
3
The symbols of battery switch:
(）or（）/ON
（ ）/OFF
O
2
1
2
(b) Open the soft cover (5) of the battery charging port.
(c) Insert the charging connector (6) into the battery
charging port (5). The charger LED indicator is off.
d) Connect the charger power plug (7) to 100V/240V AC,
the charger LED indicator is GREEN Lig
ht. See page 5
(e) Turn On the battery for charging. The charger
LED indicator turn to RED Light.
CHARGING THE BATTERY
(f) When the charger LED indicator turnsGREEN again, the charging process is completed.
Pull out the charger connector with battery, store the charger for next charge.
25
6
7
4
(a) Make sure the battery voltage is accordance
with the charger.
1>36V battery can only be charged by 36V (42V) charger.
2>48V battery can only be charged by 48V (54V) charger.
(b) Open the soft cover (5) of the battery charging port.
(c) Insert the charging connector (6) into the battery
charging port (5). The charger LED indicator is off.
(d) Connect the charger power plug (7) to 100V/240V AC,
the charger LED indicator is GREEN Light.
(e) Turn On the battery for charging. The charger
LED indicator turn to RED Light.
(a)
Make sure the battery voltage is accordance with
the charger.
36V battery can only be charged by the 36V (42V) charger
48V battery can only be charged by the 48V (54V) charger
5
6
5
(
7
LED indicator (8) Red light indicates charging. Green light indicates fully charged.
If after 8 hours of charging the LED indicator is still Red, please stop charging and contact
the supplier for service.
CHARGING THE BATTERY
Charger LED Indicator
8
5
8
BATTERY POWER INDICATOR
When the battery power is turn on「」, push the
soft button (9) to activate the capacity meter.
Flashing red light, means little or no power remaining.
Needsto be charged.
LED green bars indication
3 green lights = full energy capacity
2 green lights = mid energy capacity
1 green light = low energy capacity
1 steady red light = little or no energy remaining
∗We recommend charging the battery after every ride.
11 10 9
6
9
10
11
(d)
Battery performance deteriorates over time whether the battery is used or not. This is known as
"calendar fade". Performance also deteriorates with usage and this is known as "cycle fade".
Follow these instructions to help extend the battery life and performance.
BATTERY STORAGE
Model Battery Charger
Easy 24 36V 36(42)V
Envoy 200 48V 48(54)V
Extended 2.0 48V 48(54)V
Model / Battery /Charger Chart
7
(a) It is strictly forbidden to charge the battery with an uncertified charger.
(b) Avoid direct sunlight. Charge in dry and weld ventilated environment.
•If the bike is ridden on and/or after a rainy day, remove the battery and wipe it dry.
•When not using the battery for a long period of time or after charge, unplug the battery from the bike.
•Check the battery energy status and charge every three months.
CAUTION when charging:
8
LCD OPERATION
On
Off
Push for 1 second
Push for 2 seconds
LCD dashboard content description
Power output and battery level indicators section 8
(1) POWER output indicator:
Each cell means 2A (current) of output
(2) BATTERY level indicator:
L
CD OPERATION:
On & Off
When the battery is empty, all six cells are blank and red light will flash. Motor will stop
and show ERROR code ( 1 ). *Please charge,or install a charged battery, ASAP
LCD OPERATION
Power Assistance Level Indicator Section
Push to increase power assistance level (0.1.2.3.4.5)
Push to decrease power assistance level (5.4.3.2.1.0)
Push and simultaneously for 2 seconds to change the speed unit
between Miles Per Hour (MPH) and Kilometers Per Hour (KM/H).
Speed Indicator Selection : MPH vs.KM/H
9
This manual suits for next models
2
Table of contents
Other KHS Bicycle manuals
