Dimensions
Weight
16.46” x 5.71” x 1.42” (418mm x 145mm x 36mm)
2.05 Ibs (0.93 kg)
llluminator Power Adapter
Power Consumption 185W maximum Input 100-240V~ AC 50-60 Hz
Input Voltage 48V DC 5% Output 48V DC, maximum 4.2A
+
_
SPECIFICATIONS
Size and Weight
Operating Frequency IEEE 802.11b/g/n(2.4GHz) & IEEE 802.11a/ac(5GHz)
Network Encryption Type
Wi-Fi Module
WPA-PSK / WPA2-PSK
(Do not support WEP, WPA-Enterprise, WPA2-Enterprise, and Monitor Mode.)
CONTROLLED BY SPECTRAL CONTROLLER X
- AP9X can be connected and controlled through Kessil Spectral Controller X with a
K-Link Cable.
- Switch the AP9X to slave mode first, by touching the Mode (G) symbol for 3 seconds,
then connect to the Spectral Controller X. The AP9X will be grouped under the TB group.
INT
COLOR
Wi-Fi Mode
TROUBLESHOOTING GUIDE
Problem
Make sure the fan is operating properly.
Cause / Solution
Please make sure to perform maintenance before doing any troubeshooting.
Light doesn’t turn ON
Unit is flickering
Make sure the unit is connected to the power adapter and the power adapter is plugged
into an outlet with the correct specifications.
Make sure the device is operating within the specified operating temperature range. If
unit overheats, it will automatically shut down.
Make sure the unit has not overheated by operating at a room temperature above
100°F/40°C.
Make sure the power adapter has the right specifications.
Make sure the power adapter has the right specifications.
Make sure electrical power is available to the AC outlet being used.
7
