Kanguru BioSlider II User manual
1
Kanguru BioSlider II
User Manual
Trademarks and/or registered trademarks are the property of their
respective owners:
The information presented in this publication has been carefully prepared and is
believed to be correct at the time of publication. However, no responsibility will be
assumed for anyinaccuracies. Specifications are subject to change without notice.
2
Please be aware of the following points before using your KanguruBioSliderII.
Copyright© 2007, Kanguru Solutions. All rights reserved.
All brand or product names are trademarks of their respective companies or organizations.
Kanguru Solutions will not be held responsible for any illegal use of this product nor any losses
incurred while using this product. The user himself is responsible for the copyright laws, and is
fully responsible for any illegal actions taken.
CUSTOMER SERVICE
To obtain service or technical support for your system, please contact Kanguru Solutions
Technical Support Department at 508-376-4245, or visitwww.Kanguru.com for web support.
LIMITED WARRANTY
Kanguru Solutions guarantees that every Kanguru QS2will be free from defects in
workmanship and materials for 1 year from the date of purchase. The Hard Drive installed in
the QS2 is covered for 3 years. This warranty does not apply if, in the judgment of Kanguru
Solutions, the product fails due to damage from handling, accident, abuse, misuse, or if it has
been used in a manner not conforming to the product’s instructions, has been modified in
anyway, or the warranty labels have been removed. If the product proves defective during this
warranty period, call Kanguru Solutions Technical Support in order to obtain a RMA required
for service. When returning a product, mark the RMA number clearly on the outside of the
package, and include a copy of your original proof of purchase.
In no event shall Kanguru Solutions’ liability exceed the price paid for the product from direct,
indirect, special, incidental, or consequential software, or its documentation. Kanguru
Solutions offers no refunds for its products after 30 days of purchase. Kanguru Solutions
makes no warranty or representation, expressed, implied, or statutory, with respect to its
products or the contents or use of this documentation and all accompanying software, and
specifically disclaims its quality, performance, merchantability, or fitness for any particular
purpose. Kanguru Solutions reserves the right to revise or update its products, software, or
documentation without obligation to notify any individual or entity.
Kanguru Solutions
1360 Main St., Millis, MA 02054
508.376.4245 • Fax 508.376.4462
www.kanguru.com
3
Table of Contents
Chapter 1: Introduction………....…………………………………………………...4
Chapter 2: Installation Guide……..………………………………………………...6
Chapter 3: Starting the BioSlider II……………………………………………….10
Chapter 4: Recovery…………………………………………………………….….18
4
Chapter1: Introduction
USB 1.1/2.0 Kanguru BioSlider II
Storing, moving, and securing the data has never been easier. The Kanguru BioSlider
II is equipped with encryption technology that allows only authorized users to access
your data. The BioSlider IIis available in multiple capacityversions to provide
enoughspace to store confidential documents, presentations, high-resolution
photographs, videos, and any other personal/private files you wish.
Features
lPortable USB 1.1/2.0Kanguru BioSlider II equipped with biometric security to
prevent confidential information being accessed by others
lFingerprintscan(or password) required to obtain the data from the BioSlider II
lNo software or driver install necessary for Windows 2000 and XP
lReliable data retention
Dimensions: 85mm x 27mm x 13mm
Weight: Approximately 19g
Available Capacities: 256MB, 512MB, 1GB, 2GB,4GB, and 8GB.
The Kanguru BioSlider II is one of the most secure and developed data storage
deviceson the market. It utilizes leading-edge biometric technology, and a user can
only access the hidden secure files upon providing his/her identity that is approved by
the scanner’s authentication. All data saved on the BioSlider II is automatically
hiddenand encrypted.
The BioSlider II is equipped with advanced high-definition sensor to make it secure
and unexposed.
Hardware Requirements
lPentium @ 100MHz (minimum)
l32MB RAM (64MB recommended)
l1 USB Port
Compatible Operating Systems :
5
lWindows 98SE with Device Driver
lWindow 2000/ME and Windows XP
System Requirements
A. Plug-in the BioSlider II only after the Windows98SE driver has been installed.
(Windows 98 Users Only)
B. Be sure you have Windows 2000 Service Pack 4or Window sXP SP2
installed from Microsoft Update.
Before Use
A. Keep the BioSlider II away from heat, direct sunlight, and moisture. Do not
bend, flex, or drop the BioSlider II
B. To prevent data loss and/or damage to the BioSlider II, do not remove the
BioSlider II from the USB port while data is transferring
C. Keep the sensor away from sharp objects, such as keys and knives
D. Do not store the BioSlider II in dusty, dirty areas or conditions
E. Do not paint the BioSlider II. Paint will clog the parts and prevent proper
operation
F. On the side of the BioSlider II is a small dipswitch, which allows you to
protect data from accidental erasure. The driver will not allow copying to or
erasing of the contents on the drive. You may slide the switch from the left
(unlocked) position to the right (locked) position.
6
Chapter2:Installation Guide
Windows ME/2000/XP Installation
No driver installation is required for Window sME, 2000 or XP operating systems as
Windows has built-in drivers to support the BioSlider II. Plug the BioSlider II into a
USB port and it will be recognized by the system. Double click “My Computer”on
the desktop; you will see a “Removable Disk”drive icon,which represents the
BioSlider II.To start, double click the Drive labeled as ‘FP Software’(BioSlider II
Setup).
Removing theBioSlider II under Windows ME /2000/ XP
1. Right click the “Red Finger Print”icon in the taskbar and select “Exit”
2. Double click the “Unplug or Eject Hardware”icon on the bottom right
of the screen.
7
3. Click “Stop”in the Unplug or Eject Hardware Window.
4. Select “USB Mass Storage Device”and click “OK”
5. Click “OK”and remove BioSlider II
8
Make sure the LED is not flashing before removing the BioSlider II. If you
remove the BioSlider II while the LED is flashing, it could result in data loss and
damage to the filesand damage to the BioSlider II itself.
If you do not follow the above procedure when removing the BioSlider II, data
may be lost due to a write cache issue.
Windows98SE Installation
1. Plug-in the BioSlider II to any available USB port of your computer
2. Insert the driver CD
3. Browse the CD to the Win98 Driver folder and run the setup.exe file.
Removing theBioSlider II under Windows 98/ 98SE
1. Right click the “Red Fingerprint”icon in the taskbar and select “Exit”
9
2. When using Windows 98SE, please remove the BioSlider II by unplugging the
device.
Make sure the LED is not flashing before removing the BioSlider II. If you
remove the BioSlider IIwhile the LED is flashing, it could result in data loss and
possible damage to the filesand the disk itself.
If you do not follow the above procedureswhen removing the BioSlider II, data
may be lost due to a write cache issue.
10
Chapter3: Starting the USBBioSlider II
The BioSlider II is a removable device to your PC. Plug it into a USB
port before using it.
NOTE: You have to click “Unplug or Eject” icon in the Windows toolbar before
removing the USB BioSlider II from the system. Windows 98SE does not have this
function (icon), so you must be careful when unplugging the BioSlider II in Windows
98SE. It is your responsibility to make sure all data transfer has been completed
before the device is unplugged. The access LED in USB BioSlider IIwill stop
flashing after data is transferred. This is a good indication that youcan unplug the
BioSlider II safely.
Fingerprint Enrollment Adaptation
In order to maximize access security and to minimize the possibility of incorrect
identification, obtaining accurate fingerprint images is crucial for the enrollment
process.
The enrollment process consists of installing a complete digital image of your
fingerprint pattern from consecutive scanned images.
To obtain the best result, select the section of your finger which will present unique,
clear rib and valley patterns.
Step 1. Place your finger towards the topof the BioSlider II; close to the USB
connection
Table of contents
Popular DC Drive manuals by other brands
ABB
ABB RSYC-01 user manual
Rockwell Automation
Rockwell Automation PowerFlex 700S Programming manual
WEG
WEG DeviceNet CFW500 user manual
Siemens
Siemens SINAMICS G List manual
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Operating instructions & installation instructions
SOMFY
SOMFY JR RU 30 instructions