Kaba COMBOGARDPRO User manual
Introducing
the
• FEATURES
• 10 Codes (Manager and 9 User)
• Time Delay (99 min delay, 19 open)
• Code length (6 to 9)
• PC programmable Software
• Fully Key Pad configurable
• Audit (63 first in first out, non-erasable)
Lock Setup
Via
The
Key Pad
Tutorial
Lock Setup Steps
•ExitPre-set mode
• Select Code Length
• Install Users
• Select Additional Features
• Finalizing Configuration
• Exit Pre-set mode
Step 1) Press and Hold ‘0’ key until unit
signals twice.
Step 2) Enter the default Manger Code
5-5-5-5-5-5.
• Lock will open and is now in the Setup and
Test mode.
•Select Code Length
• Example: How to change code length from 6 to 9 digits
• Enter: 5-5-5-5-5-5 Hold down the last digit until the lock
signals twice and the LED stays on.
• PRESS ‘8’ key.
• PRESS ‘9’ (the desired code length), then PRESS ‘0’
• Re-enter: PRESS ‘9’, then PRESS ‘0’, to confirm.
• The code length has now been change to 9 digits.
• To verify: Enter: 5-5-5-5-5-5-5-5-5, the lock will open.
•Select Code Length
• Example: How to change code length from 9 to 6 digits
• Enter: 5-5-5-5-5-5-5-5-5 Hold down the last digit until the
lock signals twice and the LED stays on.
• PRESS ‘8’ key.
• PRESS ‘6’ (the desired code length), then PRESS ‘0’
• Re-enter: PRESS ‘6’, then PRESS ‘0’, to confirm.
• The code length has now been change to 9 digits.
• To verify: Enter: 5-5-5-5-5-5, the lock will open.
The lock is now set to operate using 6 digits codes.
•Install Users (1,2, & 9)
• Enter: 5-5-5-5-5-5 Hold down the last digit until the lock
signals twice and the LED stays on.
• PRESS ‘1’ key.
• Select User ID: ‘1’
• Enter user code: 1-1-1-1-1-1; re-enter code 1-1-1-1-1-1
• User is installed.
• Enter: 1-1-1-1-1-1 to verify. Lock will open.
•Install Users (1,2, & 9)
• Enter: 5-5-5-5-5-5 Hold down the last digit until the lock
signals twice and the LED stays on.
• PRESS ‘1’ key.
• Select User ID: ‘2’
• Enter user code: 2-2-2-2-2-2; re-enter code 2-2-2-2-2-2
• User is installed.
• Enter: 2-2-2-2-2-2 to verify. Lock will open.
•Install Users (1,2, & 9)
• Enter: 5-5-5-5-5-5 Hold down the last digit until the lock
signals twice and the LED stays on.
• PRESS ‘1’ key.
• Select User ID: ‘9’
(User 9 will later be enabled to override time delay)
• Enter user code: 9-9-9-9-9-9; re-enter code 9-9-9-9-9-9
• User is installed.
• Enter: 9-9-9-9-9-9 to verify. Lock will open.
Other Kaba Lock manuals
Kaba
Kaba Simplex 6200 Series User manual
Kaba
Kaba SILCA SW- VAG GROUP-L0 User manual
Kaba
Kaba Simplex 7104 Series User manual
Kaba
Kaba LA GARD 1947 User manual
Kaba
Kaba SIMPLEX LD450 User manual
Kaba
Kaba Simplex 8100 Series User manual
Kaba
Kaba E-Plex 5x63 User manual
Kaba
Kaba SIMPLEX EE1000 Series User manual
Kaba
Kaba Simplex 7104 Series User manual
Kaba
Kaba E-Plex 5200 User manual
Kaba
Kaba Simplex 506 Series User manual
Kaba
Kaba Simplex 1000 Series User manual
Kaba
Kaba E-730 Series User manual
Kaba
Kaba La Gard MECHANICAL User manual
Kaba
Kaba SIMPLEX 7102 Series User manual
Kaba
Kaba 4000 User manual
Kaba
Kaba E-PLEX 2000 User manual
Kaba
Kaba 52 User manual
Kaba
Kaba 5402 Series User manual
Kaba
Kaba SIMPLEX 900 Series User manual
