Kaba Mas AUDITCON 2 Series User manual

The following instructions cover Model 52 & T52 Super Master Operations. The

lock is shipped with a six-digit factory default Super Master User Combination

that can be set (i.e., changed) when the lock is in its default status from the

factory. Once the Super Master User Combination is set, it can only be used to

unlock the lock and reset it to the factory default combination (502550) in the

event the user combination(s) are lost.

WARNING:

The setting of the Super Master User Combination is optional. If you

do not change the default Super Master Combination prior to changing any user

combinations, the Super Master reset capability will be permanently lost.

Important Note:The lock must be manually powered before each operation by

briskly turning the dial back and forth 44

44

433

33

3.

SET SUPER MASTER COMBINATION

Caution:

Once the Super Master Combination is set, it can never be changed.

1. Press #and then 0.

G

8

2. Enter the factory default Super Master Combination of “120943”.

G

8

3. Enter the new six-digit Super Master Combination.

G

8.

4. Enter the new Super Master combination again for verification.

GR

5. Record the combination and store it in a secure place.

AUDITCON®2 SERIES

MODELS 52 & T52

SUPER MASTER OPERATIONS

Document Number 3055.025 Rev. B - 05/06

DETECT IF SUPER MASTER COMBINATION IS ACTIVE

1.Press #and then 9.

If the Super Master User combination has not been disabled (i.e., no

User combination has been changed) and has not been activated,

two red flashes

R

R

display.

If the Super Master combination is active,

five red flashes

R

R

R

R

R

display.

If the Super Master combination has been permanently disabled,

a green flash

G

displays.

RESET LOCK USING SUPER MASTER COMBINATION

1. For a Dead Bolt, place the dial in the Home position.

2. Press #and then 0.

G

8.

3. Enter the Super Master combination.

The lock will respond as follows to indicate that the lock is ready to open:

Dead Bolt - 1 slow green flash

G

Slide Bolt - Continuous green flashes

G

... for approx. 5 seconds

4. For a Dead Bolt, dial right (clockwise) until the lock bolt is retracted. For a

Slide Bolt, rotate the container handle to unlock.

Note:

The lock is now set to the factory default: Single Mode with an opening

combination of “502550”.

© 2005-2006 Kaba Mas Corporation. All rights reserved.

Kaba Mas Corporation

749 W. Short Street, Lexington, KY 40508 USA

Phone: (859) 253-4744 FAX: (859) 255-2655

Technical Support: (800) 950-4744

www.kaba-mas.com

Other manuals for AUDITCON 2 Series

3

This manual suits for next models

2

Table of contents

Other Kaba Mas Lock manuals

Kaba Mas

Kaba Mas AUDITCON 2 Series User manual

Kaba Mas

Kaba Mas LA Gard Combogard 33E Owner's manual

Kaba Mas

Kaba Mas X-10 User manual

Kaba Mas

Kaba Mas LA GARD SMARTLINC Operation instructions

Kaba Mas

Kaba Mas CDX-10 Manual

Kaba Mas

Kaba Mas Auditcon 252V User manual

Kaba Mas

Kaba Mas AUDITCON 2 Series User manual

Kaba Mas

Kaba Mas X-09 1F User manual

Kaba Mas

Kaba Mas Unicon CL Series User manual

Kaba Mas

Kaba Mas X-09 User manual

Kaba Mas

Kaba Mas LA GARD BASIC 3802 User manual

Kaba Mas

Kaba Mas UNICON User manual

Kaba Mas

Kaba Mas Unicon CL Series User manual

Kaba Mas

Kaba Mas AUDITCON 100 series User manual

Kaba Mas

Kaba Mas AUDITCON 2 Series User manual

Kaba Mas

Kaba Mas LA GARD COMBOGARDPRO 39E Manual

Kaba Mas

Kaba Mas Unicon CL Series User manual

Kaba Mas

Kaba Mas Unicon CL20 User manual

Kaba Mas

Kaba Mas DKX Series User manual

Kaba Mas

Kaba Mas Cencon MDB 30N User manual

Kaba Mas

Kaba Mas Unicon CL Series User manual

Kaba Mas

Kaba Mas 252 User manual

Kaba Mas

Kaba Mas X-09 User manual

Kaba Mas

Kaba Mas X-10 User manual

Popular Lock manuals by other brands

Magic

Magic 105 manual

Gantner

Gantner GAT NET.Lock 7020 System Installation, configuration & operation

Wittkopp

Wittkopp Insys 7202 manual

Dorma

Dorma Studio Classic Installation instruction

Securam

Securam ECSL-601 quick start guide

Sudhaus

Sudhaus 3003 operating manual

Safety 1st

Safety 1st 48517 user guide

Pado

Pado FDS-10 user manual

Esco

Esco systeQ Series installation instructions

COMPX

COMPX National D8951 instruction sheet

secureo

secureo Key Box instruction manual

Stock Loks

Stock Loks C8713 instruction sheet

COMPX

COMPX 1T-058 Information

Auslock

Auslock T11 user manual

ELCOM

ELCOM 7205 Operating instruction

Stealth SAFES

Stealth SAFES ShadowVault Instructions & Troubleshooting

Knox

Knox KeySecure 5 Admin & user guide

Kwikset

Kwikset 48334/01 Quick installation guide