JVC DLA-X95R User guide
1
D-ILA Home Theater Projector
Initial Setup Manual Ver. 1.1 for Using iOS App
This manual describes initial setup to remote control JVC D-ILA projector (hereinafter referred to as the projector)
using iPhone, iPod touch and iPad.
DLA-X95R, X75R, X55R, X35, XC7800R, XC5800R, XC3800, RS66, RS56, RS4810, RS48, RS46
The following conditions are necessary to remote control the projector using iPhone, iPod touch, and iPad.
•Compatible iOS device: iPhone 4, iPhone 4S, iPhone 5, iPod touch (4th generation), iPod touch (5th generation),
iPad
•Compatible OS: iOS 5.1 or later
* The app is not compatible with Android OS devices.
* Operability of all functions is not guaranteed.
* In order to remote control the projector from an iOS device (e.g. iPhone, iPad, or iPod touch), it is necessary to
first install exclusive app into an iOS device. Exclusive application is available free of charge.
•A wireless LAN network environment connected with the projector via wired LAN.
•Compatible projector
•Compatible iOS device
•Wireless LAN router* (hereinafter referred to as router), and LAN cable that connects the projector and router.
* A router with DHCP server function.
1Setup an iOS device for use
2Connection and setup of a D-ILA projector and a router
3Confirm connection between the projector and iOS device
4Install iOS app (exclusive application)
5Confirm connection status between the projector and iOS app
Compatible projectors
Operating Conditions
Requirements
Procedures for the initial setup
2
AIn Settings, switch ON Wi-Fi.
BInside Choose a Network, look for the router in use and select it.
CConnection is complete when the Wi-Fi strength indicator appears at the top
next to the signal strength indicator.
䡵Note
Refer to the user manual of router in use for how to select a router, and connection
between the router and iOS device. Connection is not possible using 3G or LTE
network.
Cable connect the projector to a router for network setup.
Connection image
AOpen the projector menu. Go to Function →Communication Terminal, and
choose LAN.
BOpen the projector menu again. Go to Function →Network, and turn ON the
DHCP Client.
CSelect YES under Set →Apply Network Setting?
DAn IP address will be automatically assigned when network setup is
successfully achieved. This completes network setup of the projector.
1
Setting up an iOS device
2
Connection and setup of a D-ILA projector and a router
㽳
㽳
㽴
㽲
iOS device Router
LAN cable
Wireless LAN
㽳
㽳
㽴
㽵
On
On
3
Confirm to see whether the IP address of the Router on iOS device's Wi-Fi network setup, and default gateway
shown on the network setup screen on the projector, are identical.
Confirm by checking these
AInstall iOS app
* Please refer to the support page on our website prior to installing the iOS app, which can be obtained from
the App Store. Search the App Store with a keyword “D-ILA Remote”. The app is available in English only.
BActivate the app, and press Setting icon, then select the IP Address.
CEnter the IP Address shown on the projector's menu screen under Function →Network.
DSwitch ON Connect.
䡵Note
Communications cannot be achieved when the projector's main power is off with ECO Mode setting on. To turn on
the iOS device power via the app, switch off the ECO mode.
3
Confirming connection between the projector and iOS device
4
Installation and setup of iOS app
On
On
192.168. 0. 1
192 . 1 6 8. 0. 1
Router address Projector's Network screen
The two figures
should be identical.
20
iOS app Projector Network screen
Setting
Switch ON
Connect
4
Refer to the following to confirm the connection status.
Connection status can be found at the top right of the app interface. Color of the indicator changes to notify the
projector status to the user.
AConnection is made between the projector and remote (iOS device)
BConnection is deactivated between the projector and remote (iOS device)
CWhen the connection is deactivated (as in Babove), go to Setting →IP Address, and switch ON Connect.
This completes the initial setup.
5
Confirm connection status between the projector and iOS app
Connection is made with the projector.
Connection with the projector is deactivated.
Switch ON Connect
5
[Menu]
䡵Notes
Specifications, UI menu, and design are subject change without notice.
App Store specifications are subject to change without notice. Refer to App Store Help for details on how to use the
app.
JVC KENWOOD is not liable for any damage to or loss of data on an iOS device (e.g. iPhone, iPod touch, or iPad)
when such iOS device is used in conjunction with the app and/or projector.
Information: To confirm the projector's information.
Displays connection condition between the projector and application.
Setting menu
3D menu
Lens menu
Picture menu
Home menu
Adjustment (setup) items
When an icon is displayed on the upper left
corner as shown here, tap to go back a menu.
©2013 JVCKENWOOD Corporation
Trademarks
●Apple, iPhone, iPod touch, and iPad are trademarks or registered trademarks of Apple Inc. in the United States and
other countries.
●Product names, trade names, corporate names and other names are either trademarks or registered trademarks of
their respective holders.
Other manuals for DLA-X95R
2
This manual suits for next models
12
Table of contents
Other JVC Projector manuals
JVC
JVC DLA-X95R User manual
JVC
JVC DLA-RS55 Installation guide
JVC
JVC DLA-X3 User manual
JVC
JVC Reference DLA-RS4910U User manual
JVC
JVC DLA-RS6710 User manual
JVC
JVC DLA-M2000LU - 2000 Ansi Lumen D-ila Projector Less... User manual
JVC
JVC D-ILA DLA-RS4810 User manual
JVC
JVC DLA-RS640 User manual
JVC
JVC LX-P1010ZU User manual
JVC
JVC DLA-RS35 User manual
JVC
JVC PC007182399-1 User manual
JVC
JVC S15U - DLA - D-ILA Projector User manual
JVC
JVC DLA-M15 User manual
JVC
JVC DLA-X3 Use and care manual
JVC
JVC DB-HDR36 User manual
JVC
JVC DLA-RS4500K User manual
JVC
JVC D-ILA DLA-RS65 User manual
JVC
JVC DLA-RS4810U User manual
JVC
JVC DLA-VS2200ZG User manual
JVC
JVC D-ILA DLA-RS45 User manual
