JVC KD-G828 User manual
ENGLISH
CD RECEIVER KD-G828
KD-G828
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0377-002A
[UF]
Cover_KD-G828[UF]f.indd 2Cover_KD-G828[UF]f.indd 2 5/24/06 9:58:29 AM5/24/06 9:58:29 AM
2
ENGLISH
How to forcibly eject a disc
“Please Eject” appears on the display.
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your co plete understanding and to
obtain the best possible perfor ance fro the unit.
IMPORTANT FOR LASER PRODU TS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to bea .
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
How to reset your unit
Your preset adjustments will also be erased.
How to use the MODE/SEL button
If you use MODE or SEL (select), the display
and so e controls (such as the nu ber buttons,
4/¢ buttons, 5/∞ buttons, and the
control dial) enter the corresponding control
ode.
Ex.: When you press nu ber button 1 after
pressing MODE, to operate the FM tuner.
Works as time countdown indicator.
To use these controls for original functions
again, wait for 15 seconds without pressing any
of these buttons until the control is cleared.
• Pressing MODE again also restores original
functions. However, pressing SEL akes the
unit enters a different ode.
aution:
If the te perature inside the car is below 0°C, the ove ent of ani ation and text scroll will be
halted on the display to prevent the display fro being blurred. appears on the display.
When the te perature increases, and the operating te perature is resu ed, these functions will
start working again.
EN02-05_KD-G828[UT]1.indd 2EN02-05_KD-G828[UT]1.indd 2 3/21/06 11:20:21 AM3/21/06 11:20:21 AM
ENGLISH
3
CONTENTS
ontrol panel ................................... 4
Remote controller — RM-RK50 .............. 5
Getting started ................................. 6
Basic operations ................................................... 6
Radio operations .............................. 7
Disc/USB memory operations ............. 9
Playing a disc in the unit ...................................... 9
Playing discs in the CD changer ............................ 9
Playing a USB memory ......................................... 1
Sound adjustments ........................... 14
General settings — PSM ................... 16
Title assignment ............................... 20
iPod®/D. player operations ................ 21
Other external component
operations .................................... 23
More about this unit ......................... 24
Maintenance .................................... 27
Troubleshooting ............................... 28
Specifications ................................... 31
For safety...
• Do not raise the volu e level too uch, as
this will block outside sounds, aking driving
dangerous.
• Stop the car before perfor ing any
co plicated operations.
Temperature inside the car...
If you have parked the car for a long ti e in hot
or cold weather, wait until the te perature in
the car beco es nor al before operating the
unit.
How to read this manual
• Button operations are ainly explained with
the illustrations in the table below.
• So e related tips and notes are explained in
“More about this unit” (see pages 24 – 27).
Press briefly.
Press repeatedly.
Press either
one.
Press and hold until your
desired response begins.
Press and hold both
buttons at the sa e ti e.
The following arks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
: External USB e ory operations.
Warning:
If you need to operate the unit while driving,
be sure to look ahead carefully or you ay be
involved in a traffic accident.
aution on volume setting:
Discs produce very little noise co pared
with other sources. Lower the volu e
before playing a disc to avoid da aging
the speakers by the sudden increase of the
output level.
EN02-05_KD-G828[UT]1.indd 3EN02-05_KD-G828[UT]1.indd 3 3/21/06 11:20:23 AM3/21/06 11:20:23 AM
4
ENGLISH
1 BAND button
2 • Control dial
• (standby/on attenuator) button
3 DISP (display) button
4 Re ote sensor
• DO NO expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
5 Display window
6 5 (up) / ∞ (down) buttons
Parts identification
Control panel
7 EQ (equalizer) button
8 0 (eject) button
9 USB (Universal Serial Bus) input ter inal
p SRC (source) button
q (control panel release) button
w SEL (select) button
e MODE button
r Nu ber buttons
t 4/¢ buttons
How to detach/attach the control panel
Detaching... Attaching...
CAUTION:
The lever co es out if you pressed the 0 button while
the panel is detached. If this happens, push the lever back
into lock position before attaching the panel.
Lever
EN02-05_KD-G828[UT]1.indd 4EN02-05_KD-G828[UT]1.indd 4 3/21/06 11:20:24 AM3/21/06 11:20:24 AM
ENGLISH
5
Remote controller — RM-RK50
Installing the lithium coin battery
( R2025)
Aim the remote controller directly at the
remote sensor on the unit. Make sure there is
no obstacle in between.
aution:
Main elements and features
1 (standby/on/attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 5 U (up) / D (down) ∞ buttons
• Changes the FM/AM bands with 5 U.
• Changes the preset stations with D ∞.
• Changes the folder of the MP3/WMA/
USB.
• While playing an MP3 disc on an
MP3-co patible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to an Apple iPod® or a
JVC D. player:
– Pauses/stops or resu es playback with
D ∞.
– Enters the ain enu with 5 U. (Now
5 U/D ∞/2 R/F 3 work as the enu
selecting buttons.)*
3 VOL – / VOL + buttons
• Adjusts the volu e level.
4 SOUND button
• Selects the sound ode (i-EQ: intelligent
equalizer).
* 5 U: Returns to the previous menu.
D ∞: Confirms the selection.
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it ay
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery fro over-heating,
cracking, or starting a fire:
– Do not recharge, short, disasse ble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
etallic aterials.
– Do not poke the battery with tweezers or
si ilar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Continued on next page...
EN02-05_KD-G828[UT]1.indd 5EN02-05_KD-G828[UT]1.indd 5 3/21/06 11:20:25 AM3/21/06 11:20:25 AM
6
ENGLISH
@ Adjust the sound as you want. (See
pages 14 – 16.)
To drop the volume in a moment (ATT)
To restore the sound, press it
again.
To turn off the power
Setting the clock
• See also “General settings — PSM” on pages
16 – 18.
1
2 1 Press num er utton 4 ( ).
“Clock Hr” (hour) appears. Then, turn
the control dial to adjust the hour.
2 Press ¢ to select “Clock Min”
(minute). Then, turn the control dial to
adjust the minute.
3 Press ¢ to select “24H/12H.” Then,
turn the control dial to select “12Hours”
or “24Hours,” time display mode.
3 Exit from the setting.
To check the current clock time when the
power is turned off
5 SOURCE utton
• Selects the source.
6 2 R (reverse) / F (forward) 3 uttons
• Searches for stations if pressed riefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks if pressed riefly.
• While listening to an iPod or a D. player
(in menu selecting mode):
– Selects an item if pressed riefly. (Then,
press D ∞ to confirm the selection.)
– Skips 10 items at a time if pressed and
held.
Getting started
Basic operations
~ Turn on the power.
Ÿ
* You cannot select these sources if they
are not ready or not connected.
! or M/AM tuner
⁄ Adjust the volume.
EN06-13_KD-G828[UT]1.indd 6EN06-13_KD-G828[UT]1.indd 6 3/21/06 11:19:35 AM3/21/06 11:19:35 AM
7
ENGLISH
Changing the display pattern
Ex.: When tuner is selected as the source
Source operation display
Small picture or animation is displayed*1.
Large picture or animation is displayed*1.
Audio level meter is displayed (see “LevelMeter” on page 7).
Goes back to the initial display pattern.
*1 Depends on the “Animation” settings. See
page 17 for details.
*2 The information bar will disappear if no
operation is performed for fi e seconds.
Radio operations
~
Ÿ
! Start searching for a station.
When a station is received, searching
stops.
• When receiving an FM stereo roadcast
with sufficient signal strength,
lights up on the display.
To stop searching, press the same utton
again.
To tune in to a station manually
In step ! a ove...
1
2 Select a desired station frequency.
When an F stereo broadcast is hard to
receive
1
Continued on next page...
*2
EN06-13_KD-G828[UT]1.indd 7EN06-13_KD-G828[UT]1.indd 7 3/21/06 11:19:37 AM3/21/06 11:19:37 AM
8
ENGLISH
2
3 Exit from the setting.
lights up on the display.
Reception improves, ut stereo effect will
e lost.
To restore the stereo effect, select “Mono Off”
in step 2. goes off.
Storing stations in memory
You can preset six stations for each and.
F station automatic presetting —
SS (Strong-station Sequential
emory)
1 Select the M band ( M1 – M3) you
want to store into.
2
3 Select “SSM.”
4
Local FM stations with the strongest signals are
searched and stored automatically in the FM
and.
anual presetting
Ex.: Storing FM station of 92.5 MHz into preset
num er 4 of the FM1 and.
Using the number buttons
1
2
3
Using the Preset Station List
• When appears on the display, you can
move ack to the previous display y pressing
num er utton 3.
1 ollow steps 1 and 2 above.
• By holding 5 / ∞, the Preset Station List
will appear (go to step 4 on page 9).
2
3 Display the Preset Station List.
EN06-13_KD-G828[UT]1.indd 8EN06-13_KD-G828[UT]1.indd 8 3/21/06 11:19:38 AM3/21/06 11:19:38 AM
9
ENGLISH
4 Select the preset number you want to
store into.
• You can move to the lists of the other FM
ands y pressing num er utton 5
() or 6 ( ) repeatedly.
5 Store the station.
Listening to a preset station
Using the number buttons
1
2 Select the preset station (1 – 6) you
want to listen to.
or
Using the Preset Station List
1 Display the Preset Station List, then
select the preset station you want to
listen to.
2 Change to the selected station.
Disc/USB memory
operations
Playing a disc in the unit
All tracks will e played repeatedly until you
change the source or eject the disc.
To stop playback and eject the disc
Playing discs in the CD changer
All discs in the magazine will e played
repeatedly until you change the source.
• Ejecting the magazine will also stop play ack.
~
* If you ha e changed the external input
setting to “Ext In” (see page 18), you
cannot select the CD changer.
Ÿ Select a disc.
For disc num er from 01 – 06:
For disc num er from 07 – 12:
Continued on next page...
EN06-13_KD-G828[UT]1.indd 9EN06-13_KD-G828[UT]1.indd 9 3/21/06 11:19:40 AM3/21/06 11:19:40 AM
10
ENGLISH
Track and folder information (CD/CD Text/
MP3/WMA/USB)
Once you insert a disc or attach a USB
memory, the total track number/total
playing time (for CD/CD Te t) and total
folder number/total track number (for MP3/
WMA/USB) appears, then the following
information appears...
You can select the language shown on the
display while playing a CD Te t or MP3/
WMA tracks recorded on a CD-R/CD-RW/
USB device by setting the “Language” of the
PSM item correctly, see page 17 for details.
Ex.: When “CD-CH” is selected as the source
• For the audio CD or CD Te t:
Disc name*4 and Track name*5
• For the MP3/WMA/USB:
Folder name and File name, or
Al um/performer*6 and Track name*6
• When playing CD changer, the total
numbers will not appear.
*1 Displayed only when an MP3/WMA
track is played back.
*2 Displayed only when “CD-CH” is selected
as the source.
*3 Either MP3 or WMA indicator lights up
depending on the detected file.
*4 Appears only for CD Te ts and CDs if
it has been recorded or assigned. (“No
Name” appears if no name is recorded or
assigned.)
*5 Appears only for CD Te ts. (“No Name”
appears if no name is recorded.)
*6 Appears only when “Tag” is set to “On”
(see page 18).
Playing a USB memory
This unit can play MP3/WMA tracks stored in a
USB memory.
All tracks in the USB memory will be played
repeatedly until you change the source.
• Removing the USB memory will also stop
playback.
~
Ÿ
If a USB memory has been attached...
Playback starts from where it has been stopped
previously.
• If a different USB memory is currently
attached, playback starts from the beginning.
To detach the USB memory, straightly pull it
out from the unit.
Ca tions:
• Avoid using the USB memory if it might
hinder your safety driving.
• Make sure all the important data has been
backed up to avoid losing the data.
USB input terminal
USB memory
File type*1*3
Current disc num er*2
Current folder num er*1
Current track num er
Elapsed playing time
EN06-13_KD-G828[UT]1.indd 10EN06-13_KD-G828[UT]1.indd 10 3/22/06 12:09:30 PM3/22/06 12:09:30 PM
Other manuals for KD-G828
1
Table of contents
Other JVC Car Receiver manuals
