JUSTSTANDOUT JSO16048208 User manual
Hybrid Inverter
JUSTSTANDOUT SMART HYBRID 16KW INVERTER MANUAL
JSO16048208anual
Contents
1. Safety Introductions ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 01
2. Product instructions⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 01-04
2.1Product Overview
2.2Product Size
2.3Product Features
2.4Basic System Architecture
3. Installation ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 05-21
3.1Parts list
3.2Mounting instructions
3.3Battery connection
3.4Grid connection and backup load connection
3.5PV Connection
3.6CT Connection
3.6.1 Meter Connection
3.7Earth Connection(mandatory)
3.8WIFI Connection
3.9Wiring System for Inverter
3.10 Typical application diagram of diesel generator
3.11 Single phase (230Vac) parallel Connection diagram
3.12 Split phase (120/240Vac) parallel Connection diagram
3.13 Parallel Connection for 230/400 three phase
3.14 Pcs Parallel Connection for 120/208 three phase
3.15 Parallel Connection for 120/208 three phase
4. OPERATION ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 22
4.1Power TION/OFF
4.2Operation and Display Panel
5. LCD Display Actions ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 23-35
5.1Main Screen
5.2Solar Power Curve
5.3Curve Page-Solar & Load & Grid
5.4System Setup Menu 5.5 Basic Setup Menu
5.6Battery Setup Menu
5.7System Work Mode Setup Menu
5.8Grid Setup Menu
5.9Generator Port Use Setup Menu
6. Mode ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 35-37
7. Fault Information and processing ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 37-40
8. Limitation of Liability ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 40
9. Datasheet ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 41-42
10. Appendix I ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 43-44
11. Appendix II⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 45
About This Manual
The manual mainly describes the product Information, guidelines for installation, operation and
maintenance. The manual cannot include complete Information about the photovoltaic (PV)
system.
How to Use This Manual
Read the manual and other related documents before performing any operation on the inverter.
Documents must be stored carefully and be available at all times.
Contents may be periodically updated or revised due to product development. The Information
in this manual is subject to change without notice. The latest manual can be acquired via
1. Safety Introductions
· This chapter contains important safety and operating instructions. Read and keep this manual
for future reference.
· Before using the inverter, please read the instructions and warning signs of the battery and
corresponding sections in the instruction manual.
· Do not disassemble the inverter. If you need maintenance or repair, take it to a professitional
service center.
· Improper reassembly may result in electric shock or fire.
· To reduce risk of electric shock, disctionnect all wires before aempng any maintenance or
cleaning. Turning off the unit will not reduce this risk.
· Caution: Tionly qualified perstionnel can install this device with battery.
· Never charge a frozen battery. · For optimum operation of this inverter, please follow required
specification to select appropriate cable size. It is very important to correctly operate this
inverter.
· Be very cautious when working with metal tools on or around batteries. Dropping a tool may
cause a spark or short circuit in batteries or other electrical parts, even cause an explosition.
· Please strictly follow installation procedure when you want to disconnect AC or DC terminals.
Please refer to "Installation" section of this manual for the details.
· Grounding instructions - this inverter should be connected to a permanent grounded
wiring system. Be sure to comply with local requirements and regulation to install this
inverter. · Never cause AC output and DC input short circuited. Do not connect to the mains
when DC input short circuits.
2. Product Introduction
This is a multifunctional inverter, combining functions of inverter, solar charger and battery
charger to offer uninterruptable power support with portable size. Its comprehensive LCD display
offers user configurable and easy accessible but on operation such as battery charging, AC/solar
charging, and acceptable input voltage based on different applications. - 01 -
1: Inverter Indicators
2: LCD display
3: Function Butions
4: DC Switch
5: Power tion/off bution
6: Modbus(RS-485) Port
7:Parallel port
8:Battery input ctionnectors
9:Function Port
10:Battery(CANBus) Port
11:PV input with two MPPT
12:Generator input
- 02 -
13:Load
14:Grid
15: WiFi Interface
2.2 Product Size
- 03 -
2.3 Product Features
-Self-ctionsumption and feed-in to the grid.
-Auto restart while AC is recovering.
-Programmable supply priority for battery or grid.
-Programmable mulple operation modes: Tion grid, off grid and UPS.
-Ctionfigurable battery charging current/voltage based tion applications by LCD seng.
-Ctionfigurable AC/Solar/Generator Charger priority by LCD seng.
-Compable with mains voltage or generator power.
-Overload/over temperature/short circuit protection.
-Smart battery charger design for opmized battery performance- With limit function, prevent
excess power overflow to the grid.
-Supporng WIFI mtionitoring and 2 strings of each MPP trackers
-Smart seable three stages MPPT charging for opmized battery performance.
-Time of use function.
-Smart Load Function.
2.4 Basic System Architecture
The following illustration shows basic application of this inverter.
It also includes following devices to have a Complete running system.
-Generator or Ulity
-PV modules
Ctionsult with your system integrator for other possible system architectures depending tion
your requirements.
This inverter can power all kinds of appliances in home or office envirtionment, including motor
type appliances such as refrigerator and air ctionditioner.
-04 -
3. Installation
3.1 Parts List
Check the equipment before installation. Please make sure nothing is damaged in the package.
You should have received the items in the following package:
- 05 -
3.2 Mounng instructions Installation
Precaution
This Hybrid inverter is designed for outdoor use(IP65), Please make sure the installation site
meets below ctionditions:
· Not in direct sunlight
· Not in areas where highly flammable materials are stored.
· Not in potenal explosive areas.
· Not in the cool air directly.
· Not near the televisition Antenna or antenna cable.
· Not higher than altude of about 2000 meters above sea level.
· Not in envirtionment of precipitation or humidity(>95%)
Please AVOID direct sunlight, rain exposure, snow laying up during installation and
operation. Before ctionnecng all wires, please take off the metal cover by removing
screws as shown below:
Considering the following points before selecng where to install:
· Please select a vercal wall with load-bearing capacity for installation, suitable for installation
tion ctioncrete or other ntion-flammable surfaces,installation is shown below.
· Install this inverter at eye level in order to allow the LCD display to be read at all mes.
· The ambient temperature should be between -25~60℃to ensure opmal operation. · Be
sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient
heat dissipation and have enough removing space for wires. - 06 -
Table of contents
Other JUSTSTANDOUT Inverter manuals
