Jura Z6 User manual

Z6 – Quick Reference Guide

These short instructions do not replace the ‘Z6 Instructions for Use’.

Make sure you read and observe the safety information and war-

nings first in order to avoid hazards.

You can initiate the rinse operation manually at any time.

Precondition: ‘Please select product’ is displayed.

TPlace a receptacle under the dual spout.

TPress the Rotary Switch.

‘Maintenance status’

TPress the Rotary Switch.

‘Clean’

TTurn the Rotary Switch until ‘Rinse’ is displayed.

TPress the Rotary Switch to initiate the rinse operation.

‘Machine is rinsing’, ‘Milk system is being rinsed’, water

flows out of the dual spout.

The rinse stops automatically. ‘Please select product’

appears on the display.

15 minutes after milk preparation, the milk system is automatically

rinsed. Therefore always place a receptacle under the dual spout

after preparing milk.

15 minutes after milk preparation, ‘Milk system is being rinsed’

appears, water flows out of the dual spout. The rinse stops automa-

tically. Your Z6 is once more ready for use.

To ensure that the milk system in the dual spout always works pro-

perly, you must clean it daily when you have been preparing milk.

Rinsing the machine

Automatic milk system

rinsing

Cleaning the milk system

Z6 – Quick Reference Guide

If the wrong cleaning agent is used, the machine could be damaged

and/or traces could be left behind in the water.

TUse only original JURA maintenance products.

EJURA milk system cleaner is available from specialised dealers.

ETo clean the milk system, use the container supplied.

Precondition: ‘Clean the milk system’ is displayed.

TPress the Rotary Switch.

‘Clean the milk system’

TPress the Rotary Switch again.

TPress the ‘Start’ button.

TPress the ‘Start’ button again.

‘Cleaning agent for milk system’

TRemove the milk pipe from the milk container or carton.

TAdd 1 capful of milk system cleaner to the outer, rectangular

part of the container.

TPlace the container under the dual spout.

TConnect the milk pipe to the container.

ETo connect the milk pipe to the container correctly, the pipe

must be fitted with a connector.

TSlide the dual spout down to fix the container in place.

TPress the ‘Next’ button.

‘Milk system is being cleaned’, the dual spout and the pipe

are cleaned. Water flows out of the dual spout.

The operation stops automatically. ‘Milk system cleaning

complete’ appears briefly on the display.

The dual spout must be dismantled and rinsed daily if milk has been

prepared to make sure it functions perfectly and also in the interests

of hygiene.

CAUTION

Z6 – Quick Reference Guide

TRemove the milk pipe and rinse it thoroughly under running

water.

TPress the releasing devices and pull the cover of the dual

spout up and off.

TRemove the milk system from the dual spout.

TDismantle the milk system into its individual parts.

TRinse all the parts under running water. If there are severely

dried-on milk residues, firstly immerse the individual parts

in a solution of 250 ml cold water and 1 capful of JURA milk

system cleaner. Then rinse the parts thoroughly.

TReassemble the milk system.

Z6 – Quick Reference Guide

TFit the assembled individual parts back in the dual spout and

press it firmly.

TFit the cover of the dual spout. Make sure the cover of the

dual spout is correctly fitted.

TConnect the milk pipe to the dual spout.

Your Z6 no longer has to be descaled if you are using the CLARIS

Smart filter cartridge. If you did not insert the filter cartridge the first

time you used the machine, you can do this now as follows.

Precondition: ‘Please select product’ is displayed.

TRemove and empty the water tank.

TFit the filter cartridge extension supplied on top of a CLARIS

Smart filter cartridge.

TInsert the filter cartridge with its extension into the water

tank.

TTurn the filter cartridge clockwise until it audibly clicks into

place.

TFill the water tank with fresh, cold water and reinsert the

tank.

EThe machine automatically detects that you have just inserted

the filter cartridge.

‘Use filter’ / ‘Saved’

‘Filter is being rinsed’, the filter is rinsed. The water flows

directly into the drip tray.

Inserting the filter

Z6 – Quick Reference Guide

‘Empty drip tray’

TEmpty the drip tray and put it back into the machine.

‘Use filter’, ‘Filter rinsing complete’

‘Please select product’ appears on the display. Your Z6 is

once more ready for use.

EOnce the filter cartridge stops working (depending on the

water hardness setting), the Z6 will prompt you to change the

filter.

ECLARIS Smart filter cartridges are available from specialised

dealers.

Precondition: ‘Change filter’ is displayed.

TPress the Rotary Switch.

‘Change the filter’

TPress the Rotary Switch again.

TRemove and empty the water tank.

TTurn the filter cartridge anticlockwise and remove it along

with the extension from the water tank.

TFit the filter cartridge extension on top of a new CLARIS

Smart filter cartridge.

TInsert the filter cartridge with its extension into the water

tank.

TTurn the filter cartridge clockwise until it audibly clicks into

place.

TFill the water tank with fresh, cold water and reinsert the

tank.

EThe machine automatically detects that you have just chan-

ged the filter cartridge.

‘Change the filter’ / ‘Saved’

Changing the filter

Z6 – Quick Reference Guide

‘Filter is being rinsed’, the filter cartridge is rinsed. The water

flows directly into the drip tray.

‘Empty drip tray’

TEmpty the drip tray and put it back into the machine.

‘Change the filter’, ‘Filter rinsing complete’

‘Please select product’ appears on the display. Your Z6 is

once more ready for use.

After 180 preparations or 80 switch-on rinses, the Z6 will prompt you

to clean it.

If the wrong cleaning agent is used, the machine could be damaged

and/or traces could be left behind in the water.

TUse only original JURA maintenance products.

EThe cleaning programme lasts approximately 20 minutes.

EDo not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so.

EJURA cleaning tablets are available from specialised dealers.

Precondition: ‘Clean machine’ is displayed.

TPress the Rotary Switch.

‘Clean’

TPress the Rotary Switch again.

‘Clean’

TPress the ‘Start’ button.

TPress the ‘Start’ button again.

‘Empty coffee grounds container’

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

‘Press the Rotary Switch’

TPlace a receptacle under the dual spout.

TPress the Rotary Switch.

‘Machine is being cleaned’, water flows out of the dual spout.

The operation is interrupted, ‘Add cleaning tablet’.

TOpen the cover of the filler funnel for ground coffee.

Cleaning the machine

CAUTION

Z6 – Quick Reference Guide

TInsert a JURA cleaning tablet into the filler funnel.

TClose the cover of the filler funnel.

‘Press the Rotary Switch’

TPress the Rotary Switch.

‘Machine is being cleaned’, water flows out of the dual spout

repeatedly.

The operation stops automatically.

‘Empty coffee grounds container’

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

‘Please select product’ appears on the display. Cleaning is

now complete.

The Z6 builds up deposits of limescale over time and automatically

prompts you to descale it when necessary. The degree of calcifica-

tion depends on the hardness of your water.

EIf you are using a CLARIS Smart filter cartridge, you will not be

prompted to descale.

If the descaling agent comes into contact with the skin or eyes, this

can cause irritation.

TAvoid contact with the skin or eyes.

TRinse off the descaling agent with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dama-

ged and/or traces could be left behind in the water.

TUse only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to

the machine.

TAllow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces

(e.g. marble), damage cannot be ruled out.

TClean up any splashes immediately.

Descaling the machine

JCAUTION

CAUTION

Z6 – Quick Reference Guide

EThe descaling programme lasts approximately 45 minutes.

EJURA descaling tablets are available from specialised dealers.

Precondition: ‘Decalcify machine’ is displayed.

TPress the Rotary Switch.

‘Descale’

TPress the Rotary Switch again.

‘Descale’

TPress the ‘Start’ button.

TPress the ‘Start’ button again.

‘Empty drip tray’

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

‘Pour descaling agent into water tank’

TRemove and empty the water tank.

TCompletely dissolve the contents of one blister (3 JURA des-

caling tablets) in a receptacle holding 600 ml of lukewarm

water. This may take several minutes.

TPour the solution into the empty water tank and insert it into

the machine.

‘Press the Rotary Switch’

TPlace a receptacle under the hot water spout.

TPress the Rotary Switch.

‘Machine is being descaled’, water flows out of the hot water

spout repeatedly.

The operation is interrupted, ‘Empty drip tray’.

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

‘Fill water tank’

Z6 – Quick Reference Guide

TEmpty the receptacle and place it under the hot water and

dual spouts.

TRemove the water tank and rinse it thoroughly.

TFill the water tank with fresh, cold water and reinsert the

tank.

‘Press the Rotary Switch’

TPress the Rotary Switch.

‘Machine is being descaled’, the descaling operation is con-

tinued, water flows out of the dual spout and the hot water

spout.

‘Empty drip tray’

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

‘Please select product’ appears on the display. Descaling is

now complete.

EIf the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

Other manuals for Z6

Table of contents

Other Jura Coffee Maker manuals

Popular Coffee Maker manuals by other brands

Taurus

Taurus Livorno 6 manual

Delta-q

Delta-q QUICK instruction manual

Bunn

Bunn LCA-1 Installation & operating guide

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Use and care book

Saeco

Saeco Vienna Plus Sup 018M operating instructions

DeLonghi

DeLonghi DC300 Owner's instructions

INCAPTO

INCAPTO BXCO1470E Instructions for use

Bosch

Bosch TASSIMO finesse TAS16B Series user manual

Exido

Exido 245-072 Specifications

Animo

Animo OptiVend Choco user manual

Siemens

Siemens TQ505DF Series user manual

DeLonghi

DeLonghi ECI341 Instructions for use

Krups

Krups KT406511 manual

Cimbali

Cimbali M32 Classic manual

Philips

Philips HL3844N Service manual

Bosch

Bosch TES 515 SERIES instruction manual

Tekmatix

Tekmatix TMFM - 65 Operation manual

Scarlett

Scarlett SC-CM33005 instruction manual