Juniper EX2200 Series Guide

Mounting an EX2200 Switch on a Wall

You can mount an EX2200 switch on a wall by using the separately orderable

wall-mount kit.

WARNING:

■When mounting an EX2200 switch chassis in a vertical position, orient the front

panel of the chassis downward to ensure proper airflow and meet safety

requirements in the event of a fire.

■When wall-mounting Power over Ethernet (PoE) models (EX2200-24P and

EX2200-48P), install the wall-mount baffle above the units to reduce the risk of

objects or substances falling into the air exhaust or power supply, which could

cause a fire.

Before mounting the switch on a wall:

■Verify that the site meets the requirements described in Site Preparation Checklist

for EX2200 Switches.

■Read General Safety Guidelines and Warnings for EX Series Switches, with

particular attention to Chassis Lifting Guidelines for EX2200 Switches.

■Remove the switch from the shipping carton (see Unpacking an EX2200 Switch).

Ensure that you have the following parts and tools available:

■2 wall-mount brackets (provided in the wall-mount kit)

■1 wall-mount baffle (provided in the wall-mount kit)

■12 wall-mount bracket screws (provided in the wall-mount kit)

■6 mounting screws (8-32 x 1.25 in. or M4 x 30 mm) (not provided)

■Hollow wall anchors rated to support up to 75 lb (34 kg) if you are not screwing

the screws directly into wall studs (not provided)

■Phillips (+) screwdriver, number 2 (not provided)

Mounting an EX2200 Switch on a Wall ■1

To mount one or two switches on a wall:

1. Attach the wall-mount brackets to the sides of the chassis using four wall-mount

bracket screws on each side, as shown in Figure 1.

Figure 1: Attaching Wall-Mount Brackets to a Switch Chassis

g027022

Front panel

Rear panel

Baffle for PoE Models

(EX2200-24P and EX2200-48P)

2. If you are mounting two switches together, align the second switch on top of the

first and attach it to the mounting brackets using two additional wall-mount

bracket screws on each side (Figure 3 shows two aligned switches).

3. Install six mounting screws in the wall for the wall-mount brackets and baffle as

shown in Figure 2:

■Use hollow wall anchors rated to support up to 75 lb (34 kg) if you are not

inserting the mounting screws directly into wall studs.

■Turn the screws only part way in, leaving about 1/4 in. (6 mm) distance

between the head of the screw and the wall.

a. Install screw A.

b. Install screw B18.68 in. (47.4 cm) from screw Aon a level line.

c. Install screw C5.98 in. (15.2 cm) on a plumb line down from screw Aand

screw D5.98 in. down from screw B.

d. For PoE models, install screw E2.76 in. (7 cm) up from and 8.32 in. (21.1 cm)

to the right of screw A.

e. For PoE models, install screw F4.49 in. (11.4 cm) to the right of screw E.

2■Mounting an EX2200 Switch on a Wall

Figure 2: Measuring for Mounting Screws

18.68 in. (47.4 cm)

Front

Rear

E F

Side wall-mount brackets

8.32 in. (21.1 cm)

4.49 in.

(11.4 cm)

5.98 in.

(15.2 cm)

2.76 in (7 cm)

g021067

Baffle for PoE Models

(EX2200-24P and EX2200-48P)

4. Lift the unit (one switch or two) by grasping each side, and hang the unit by

attaching the brackets to the mounting screws as shown in Figure 3.

5. For PoE models, install the baffle by attaching it to mounting screws Eand Fas

shown in Figure 3.

6. Tighten all mounting screws.

Figure 3: Mounting a Switch on a Wall

g020723

Hang attached brackets

on wall-mounted screws.

Front

panel

Rear

panel

Baffle for PoE Models

(EX2200-24P and EX2200-48P)

Related Topics ■Connecting AC Power to an EX2200 Switch

■Connecting and Configuring an EX Series Switch (CLI Procedure)

Mounting an EX2200 Switch on a Wall ■3

■Connecting and Configuring an EX Series Switch (J-Web Procedure)

■Wall-Mounting Warnings for EX2200 Switches

Published: 2010-04-27

4■Mounting an EX2200 Switch on a Wall

Other manuals for EX2200 Series

Table of contents

Other Juniper Switch manuals

Juniper

Juniper EX2300-24P User manual

Juniper

Juniper EX9214 Installation instructions

Juniper

Juniper EX2200 Series User manual

Juniper

Juniper EX3200 Series Installation instructions

Juniper

Juniper EX2300-C-12P User manual

Juniper

Juniper QFX10002 Installation instructions

Juniper

Juniper EX2200-C User manual

Juniper

Juniper EX8216 Installation instructions

Juniper

Juniper 200 Series User manual

Juniper

Juniper EX4300 Installation instructions

Juniper

Juniper EX2200 Series Installation instructions

Juniper

Juniper QFX5100 Installation instructions

Juniper

Juniper EX Series User manual

Juniper

Juniper QFX5130-32CD Installation instructions

Juniper

Juniper EX4200 Series Installation instructions

Juniper

Juniper EX2200 Series Installation instructions

Juniper

Juniper EX2200 Series User manual

Juniper

Juniper EX Series User manual

Juniper

Juniper EX8200 Series Quick start guide

Juniper

Juniper EX4600 Installation instructions

Juniper

Juniper QFX5100 Installation instructions

Juniper

Juniper EX Series User manual

Juniper

Juniper EX9208 User manual

Juniper

Juniper QFX5100-48T User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual