JUKI IP-310/ACF-172-1790 User manual
ENGLISH
IP-310 / ACF-172-1790
INSTRUCTION MANUAL
– 1 –
CONTENTS
1. OPERATION TO DRIVE THE DEVICE (ACF MODE) .....................................................4
1-1. Name of each section of the operation panel......................................................4
1-1-1. Body ..............................................................................................................................4
1-1-2. Buttons to be used in common ..................................................................................6
1-2. Basic operation of the sewing machine...............................................................7
1-3. LCD display section under ACF mode .................................................................8
1-3-1. ACF data input screen.................................................................................................8
1-3-2. Automatic sewing screen.......................................................................................... 11
1-3-3. Manual sewing screen...............................................................................................13
1-4. Performing ACF pattern selection ......................................................................14
1-5. Performing re-sewing...........................................................................................15
1-6. Winding bobbin thread ........................................................................................17
1-7. Using counter .......................................................................................................18
1-7-1. Setting procedure of the counter .............................................................................18
1-7-2. Count-up releasing procedure..................................................................................20
1-8. Performing new register of ACF pattern. ...........................................................21
1-8-1. Performing the equal interval input .........................................................................21
1-8-2. Performing the individual input................................................................................24
1-9. Copying ACF pattern............................................................................................27
1-10. Changeover of men's and ladies' wear.............................................................29
1-11. Naming the pattern .............................................................................................30
2. OPERATION OF THE SINGLE UNIT OF SEWING MACHINE AND SETTING
PROCEDURE (LBH MODE)........................................................................................31
2-1. LCD display section at the time of independent sewing ..................................31
2-1-1. LBH data input screen...............................................................................................31
2-1-2. Independent sewing screen......................................................................................34
2-2. Performing LBH pattern No. selection ...............................................................36
2-3. Performing sewing shape selection ...................................................................37
2-4. Performing re-sewing under LBH mode.............................................................39
2-4-1. To continue performing sewing from some point in sewing .................................39
2-4-2. To perform sewing from the start.............................................................................40
2-5. Performing new register of LBH pattern ............................................................41
2-6. Sewing shape list .................................................................................................43
2-7. Changing sewing data .........................................................................................44
2-7-1. Changing procedure of sewing data........................................................................44
2-7-2. Sewing data list..........................................................................................................46
2-8. Inputting the presser type ...................................................................................56
– 2 –
2-8-1. Setting procedure of the presser type .....................................................................56
2-8-2. Table of presser type .................................................................................................57
2-9. Changing needle thread tension.........................................................................58
2-10. Setting procedure of sewing data with/without edit .......................................60
2-11. Copying LBH sewing pattern.............................................................................61
2-12. Registering sewing data to customize button.................................................63
2-12-1. How to register.........................................................................................................63
2-12-2. Register state at the time of your purchase..........................................................64
2-13. Changing sewing mode .....................................................................................65
2-14. LCD display section at the time of continuous stitching ...............................66
2-14-1. LBH continuous stitching data input screen ........................................................66
2-14-2. LBH continuous stitching sewing screen .............................................................68
2-15. Performing LBH continuous stitching..............................................................71
2-15-1. Selection of LBH continuous stitching data .........................................................71
2-15-2. Editing procedure of the LBH continuous stitching data ....................................72
2-16. Explanation of plural motions of knife .............................................................75
2-17. Changing memory switch data .........................................................................78
2-17-1. Changing procedure of memory switch data........................................................78
2-17-2. Memory switch data list ..........................................................................................80
3. OTHER FUNCTIONS.....................................................................................................87
3-1. Using communication function...........................................................................87
3-1-1. Handling possible data..............................................................................................87
3-1-2. Performing communication by using the media.....................................................89
3-1-3. Performing communication by using RS-232C.......................................................92
3-1-4. Take-in of the data .....................................................................................................93
3-2. Information function.............................................................................................96
3-2-1. Observing the maintenance and inspection information.......................................97
3-2-2. Inputting the inspection time....................................................................................99
3-2-3. Releasing procedure of the warning......................................................................101
3-2-4. Observing the production control information .....................................................102
3-2-4-1. When displaying from the information screen ............................................................102
3-2-4-2. When displaying from the sewing screen....................................................................104
3-2-5. Performing setting of the production control information ..................................105
3-2-6. Observing the working measurement information...............................................108
3-3. Trial sewing function.......................................................................................... 111
3-3-1. Performing trial sewing ........................................................................................... 111
3-3-2. Vector parameter list ............................................................................................... 114
3-3-3. Thread tension value display color list.................................................................. 115
4. ERROR CODE LIST ....................................................................................................116
– 3 –
5. MAINTENANCE MODE ...............................................................................................126
5-1. Performing key lock ...........................................................................................126
5-2. Displaying version information.........................................................................128
5-3. Using check program.........................................................................................129
5-3-1. Displaying the check program screen...................................................................129
5-3-2. Performing needle thread trimmer origin adjustment..........................................130
5-3-3. Performing bobbin thread trimmer origin adjustment .........................................131
5-3-4. Performing sensor check........................................................................................132
5-3-5. Performing LCD check ............................................................................................134
5-3-6. Performing touch panel compensation .................................................................135
5-4. Communication screen of maintenance personnel level ...............................137
5-4-1. Data which are possible to be handled..................................................................137
5-4-2. Displaying the maintenance personnel level ........................................................138
5-5. Information screen of the maintenance personnel level ................................139
5-5-1. Display of error record ............................................................................................139
5-5-2. Display of the cumulative working information ....................................................141
− −
1. OPERATION TO DRIVE THE DEVICE (ACF MODE)
1-1. Name of each section of the operation panel
1-1-1. Body
( Front ) ( Right side )
1
5432
6
9
8
7
!0
− −
1Touch panel • LCD display section
2READY key →Changeover of the data input screen and the sewing
screen can be performed.
3INFORMATION key →Changeover of the data input screen and the
information screen can be performed.
4COMMUNICATION key →Changeover of the data input screen and the
communication screen can be performed.
5MODE key →Changeover of the data input screen and the mode
changeover screen which performs various detail
settings can be performed.
6MEDIA slot →MEDIA slot (use it with lid closed.)
7CONNECTOR for RS-232C communication
8VARIABLE RESISTOR for adjusting contrast
of colored LCD screen
→Contrast of the screen can be adjusted. Adjust it as
you like.
9CONNECTOR for external input
!0 MEDIA take-out lever
− −
1-1-2. Buttons to be used in common
The buttons which perform common operations in each screen of IP-310 are as follows :
CANCEL button →This button closes the pop-up screen. In case of the
data change screen, the data being changed can be
cancelled.
ENTER button →This button determines the changed data.
UP SCROLL button →This button scrolls the button or the display in the
upward direction.
DOWN SCROLL button →This button scrolls the button or the display in the
downward direction.
RESET button →This button performs the release of error.
NUMERAL INPUT button →This button displays ten keys and input of numerals
can be performed.
SEWING DATA DISPLAY button →This button displays the sewing data list
corresponding to the pattern No. being selected.
→ Refer to 2-7. Changing sewing data, p.44.
ACF PATTERN NAME setting
button
→This button displays the character input screen.
→ Refer to 1-11. Naming the pattern, p.30.
PRESSER DOWN button →This button lowers the presser and displays the
presser down screen. To raise the presser, press
PRESSER UP button displayed in the presser down
screen.
BOBBIN WINDER button →This button performs bobbin thread winding.
→ Refer to 1-6. Winding bobbin thread, p.17.
− −
1-2. Basic operation of the sewing machine
1Turn ON the power switch.
When the power is turned ON, the ACF data input
screen is displayed.
2Select the pattern No. you desire to sew.
When ACF pattern selected button (A)
which is selected at present is pressed,selection
of ACF pattern No. can be performed.For the
selecting procedure of ACF pattern No, refer to
1-4. Performing ACF pattern selection,p.14.
※ For the details of this screen, refer to
1-3-1. ACF data input screen,p.8.
4Start sewing.
Set the sewing product and press the knee switch
or hand switch (switch set to the start switch).
Then the sewing machine automatically starts
and sewing starts.
※ For the setting procedure of the start switch, refer
to 2-17. Changing memory switch data,p.78.
※ For the detailed explanation of this screen, see
1-3-2. Automatic sewing screen,p.11.
3Set the sewing machine to sewing possible
state.
Press READY key (C), and POWER
OFF PROHIBITION screen is displayed. Make
preparations for sewing while this screen is displayed.
When the sewing is in a possible state, the back-light
of LCD display changes to green color.
A
− −
1-3. LCD display section under ACF mode
1-3-1. ACF data input screen
A B C D E F
N
O
P
Q
M
G
I
K
H
J
L
− −
Button and display Description
AACF PATTERN NEW REGISTER
button
ACF pattern No. new register screen is displayed.
→Refer to 1-8. Performing new register of ACF pattern.,p.21.
BACF PATTERN COPY button ACF pattern No. copy screen is displayed.
→Refer to 1-9. Copying ACF pattern,p.27.
CACF PATTERN NAME SETTING
button
Sewing pattern name input screen is displayed.
→Refer to 1-11. Naming the pattern,p.30.
DEQUAL INTERVAL INPUT button Number of buttonholes input screen is displayed and ACF pattern data
being selected at present can be edited.
→Refer to 1-8-1.6Input the number of buttonholes,p.22.
E PRESSER DOWN button Presser down screen is displayed and the needle moves to the right side. To
raise the presser, press the presser up button displayd in the presser down
screen.
＊When performing threading in this state, turn OFF the power before
performing.
FBOBBIN WINDER button Bobbin thread can be wound.
→Refer to 1-6. Winding bobbin thread,p.17.
G ACF PATTERN SELECTION
button
ACF pattern No. being selected at present is displayed on this button and
when this button is pressed, ACF pattern No. selection screen is displayed.
→Refer to 1-4. Performing ACF pattern selection,p.14.
HNUMBER OF BUTTONHOLES
REGISTERED
Number of buttonholes registered to ACF pattern No. being selected at
present is displayed.being selected at present.
I MEN'S/LADIES' WEAR
SELECTION button
Every time this button is pressed down, men's and ladies' wear can be
changed over alternately.
→Refer to 1-10. Changeover of men's and ladies' wear.p.29.
JPAIR STACKING ON/OFF
SELECTION button
Every time this button is pressed down, pair stacking ON/OFF can be
changed over. This button is displayed only when the pair stacking use
setting of memory switch data (level 1) is ON.
→Refer to 2-17. Changing memory switch data,p.78.
Table of contents
Other JUKI Sewing Machine manuals
JUKI
JUKI AMS-224E/IP-410 User manual
JUKI
JUKI MF-3620 User manual
JUKI
JUKI MS-191; MS-191A; MS-261; MS-261J User manual
JUKI
JUKI MO-104N User manual
JUKI
JUKI MO-50e User manual
JUKI
JUKI DNU-1541 User manual
JUKI
JUKI LK-1850 Series Quick start guide
JUKI
JUKI MO-6900 Series User manual
JUKI
JUKI MO-655 User manual
JUKI
JUKI Jtron JTR-KM3680N/WSU Series User manual
JUKI
JUKI APW-895NE User manual
JUKI
JUKI HZL-35Z User manual
JUKI
JUKI LU-2810 Series User manual
JUKI
JUKI AMS-210DHL-6100 User manual
JUKI
JUKI MO-735 User manual
JUKI
JUKI MO-734DE User manual
JUKI
JUKI LZ-271 User manual
JUKI
JUKI MO-6804D User manual
JUKI
JUKI DLM-5200N User manual
JUKI
JUKI MO-6900R Series User manual
