JOMISE G814 User manual
User Manual
UHD 4K MIRROR DASH CAM
G814
Please read this user manual carefully before use.
Version: 1.0
JOMISE G814 Mirror Dash Cam
Backup camera
cable (21ft) *1
（）（）
GPS Receiver
1PACKAGE CONTENTS
1
2PRODUCT OVERVIEW
2
Front Camera
Rear Camera Port
GPS Port
Micro SD Card Slot
Power Supply Port
Screen 11 inch IPS touch screen.
Short press to turn off the screen, long press to turn off the power.
Power Button
Fasteners
Record the front view of the vehicle.
Connect the GPS receiver.
Connect the car charger.
Please use the included silicone straps.
Insert a Micro SD card (maximum support 128G).
Connect the rear view camera.
⑧
⑦
1
2
3
4
5
6
7
8
No. Name Overview
Item Name 11″ Stream Media Mirror Dash Camera
Model JOMISE G814
Screen Size 11″ IPS Touch Screen
Display Resolution 1920 x 480P
Recording Resolution
Front Camera: 3840 x 2160P
Rear Camera: 1920 x 1080P
Lens
Front Camera: F1.8 170°
Rear Camera: F2.0 150°
Recording Format TS
Photo Format JPG
Memory Card Micro SD card 32G~128G U3
Storage Temperature -22℉~176℉
Operating Temperature -4℉~158℉
Product Weight
Item Dimension
1.65 lb
10.1 x 2.9 x 1.7 (in)
Power Interface Mini USB 5V/3A
3PRODUCT PARAMETER
3
4INSTALLATION
GPS Receiver
Car Charger
Red wire Connected to
the reversing lamp positive
Rear Camera
Backup Camera
Connecting Wiring
4
Insert the Micro SD Card into the stream media mirror dash camera, taking
care that the gold contacts are facing towards the backside of the stream
media mirror dash camera. Push the memory card until it clicks into the slot.
● Use the edge of a small coin ( or similar object ) to push the memory card into
slot if required. Take care that the card has clicked into slot, a second push
inwards will release the memory card.
● Do not remove or insert the memory card when the Mirror Dash Cam is turned
on. This may damage the memory card.
● Take care when removing the SD card from the Mirror Dash Cam when it is
installed in the vehicle. Due to the card slot mechanism, the card will spring from
the slot when released.
● Periodically reformat the memory card. Every 2-3 weeks. We recommend that
you reformat the memory card as this will delete all files and can improve the
read and write speed of the Micro SD card.
● Of course, you should only do this after you've downloaded any files from the
SD card that you may want to keep, as formatting the card will remove all
content.
● Format your memory card using the Mirror Dash Cam. This will make sure that
the card is structured specifically for your camera.
● Press to enter into the setting and choose the Format Card option to follow
the on-screen instructions accordingly.
Notice:
4INSTALLATION
5
Step 1: Attach the upper end of the straps to the retaining hooks on the
top of the rear-view mirror.
Step 3: Extend the straps around the back of the rear-view mirror and
attach them to the bottom retaining hooks.
Step 2: Pull out the front lens of the JOMISE G814 to match the rearview
mirror of the vehicle.
4INSTALLATION
6
Rear Camera Installation Steps
1. Choose the installation location inside or outside the car. (To get the best
clarity, we recommend installing it outside the car)
2. Use the 3M stickers or screws included in the package to fix the rear
camera at the predetermined position.
3. After fixing the rear camera at the predetermined position, connect the
rear camera cable.
▲Installed inside the car ▲ Installed outside the car
JOMISE G814
Rear Camera
Trigger Line
NOTICE: The red cable at the end of the rear camera cable is the trigger line,
which is used to connect the positive of the reversing lamp. When reversing, the
rearview angle will be displayed on the JOMISE G814 screen and the reversing
guidelines will be activated.
4INSTALLATION
7
Please format the SD card regularly every month, a long time working produce
many locked files, which will stop the recording.
The rear camera is a fragile part. If it is damaged, please contact our customer
support team for replacement.
4. Insert the rear camera connection plug into the JOMISE G814 rear
camera port.
5. Hidden and route the rear camera cable in the car.
6. If you need to install a trigger cable to activate the reversing guidelines,
please find the positive cable of the reversing lamp, or ask a professional
for help.
● Make the connection first and ensure the machine work well before installing.
● Keep wiring away from moving parts like power seats or hinges in the trunk.
Avoid screws and sharp objects as this may damage wiring.
● When drilling holes in the car, please be mindful of the parts nearby to avoid
damaging them.
● Before attaching the double-sided tape, please remove the stain or oil with
alcohol cleaner from the surface.
● When the temperature is low please warm up the mounting surface before using
adhesive tape in order to improve the adhesion.
● The provided 3M sticker cannot be reused as the adhesive will not be strong
enough.
● Do not disassemble or change any part of this product, this will not be covered
by warranty.
NOTICE:
4INSTALLATION
8
Recording Date & Time
File Playback
Snapshot
Lock / Unlock
Driving Direction
Settings
Start / Stop Recording
Front / Rear View Switch
Speed
Screen Brightness Adjustment
N 0 mph
12:25
2021-04-16Fri
1
BL
01:39
⑨
⑩
�
⑪
5GENERAL SETTINGS
9
Table of contents
Other JOMISE Dashcam manuals
