Hardware Installation
Before You proceed
Please note below precautions before any install/uninstall operations:
✓ALWAYS turn off the system before hardware installation/un-installation.
✓ALWAYS unplug the power cord from the wall outlet/socket before hardware installation/un-
installation.
✓ALWAYS touch a safely grounded object or metal object before touching the device.
DO NOT touch any devices before the system is fully off.
DO NOT touch any components on the device, especially ICs on the board.
Card and Driver Installation
Download driver
From
https://www.yuan.com.tw/support/download.htm
Or via link at shop.jmc.se
Step 1: Turn off the system and unplug power cord from wall outlet/socket.
Step 2: Remove the computer system case cover.
Step 3: Plug capture device into an available PCIe slot on motherboard.
Step 4: After hardware installation is completed, then install the driver.
