JL Audio 94606 User manual

INSTALLATION GUIDE

for the

SB-J-WRUD/10TW1

SKU# 94606 & 94608

2007-2017 Jeep Wrangler Unlimited

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital

that the Stealthbox®be properly mounted to the vehicle according to

these instructions. Failure to mount the enclosure properly presents two

problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULTY:

ESTIMATED TIME:

1 HOUR

Enclosure Type: Sealed

Driver Type: 10T W1

Nominal Impedance: 4 ohms

Continuous Power Handling: 300 watts (RMS method)

Continued on Next Page

OUT

SB-J-WRUD/10TW1 INSTR_SKU# 011387

INCLUDED HARDWARE

Continued on Next Page

Page 2 • JL Audio, Inc., 2019

SB-J-WRUD/10TW1 INSTR_SKU# 011387

BOM ID Qty SKU Description

1 1 153544 3/8 - 16 x 1” Hex Button Head Cap Screw Black

2 3 153548 3/8” M10 Serrated Spring Washer Black

3 5 153549 3/8” Flat Washer Black

4 1 150729 Front Bracket

5 2 150731 Rear Bracket

6 2 153550 3/8” Nylon Washer Black

7 2 153634 M8 x 30 mm 1.25 Flange Head Bolt Black

8 2 153633 M8 x 45 mm 1.25 Flange Head Bolt Black

9 2 153546 M8 1.25 mm Pitch Hex Flange Lock Nut

10 2 153547 3/8 - 16 x 1” Hex Head Bolt Black

POWER RECOMMENDATION

JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2 For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

CONNECTIONS

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for

both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.

Continued on Next Page

Page 3 • JL Audio, Inc., 2019

SB-J-WRUD/10TW1 INSTR_SKU# 011387

Page 4 • JL Audio, Inc., 2019 Continued on Next Page

STEP 8

Connect speaker cable to the terminal cup on

the Stealthbox®, and place the enclosure into

position between the Front and Rear Brackets.

Route the speaker cable as necessary.

STEP 7

Align both Rear Brackets perpendicular to the

rail, as shown.

STEP 6

Pull the carpet down from the side of the

vehicle. Slide a Rear Bracket over the Flange

Head Bolt, under the rail, as shown. Secure

with an M8 1.25 Hex Flange Lock Nut, and hand

tighten. Repeat for the second hole.

STEP 5

Slide a 3/8 “ Flat Washer and a 3/8” Nylon

Washer over an M8 x 30 mm 1.25 Flange Head

Bolt (substitute an M8 x 45 mm 1.25 Flange

Head Bolt for vehicles with hard top), and

thread the assembly through one of the holes

indicated in the previous step. Repeat for the

second hole.

STEP 4

Locate the two indicated holes at the top of

the side rail.

STEP 3

Slide the Front Bracket over the factory stud,

followed by the seat belt bracket and nut, as

shown. Hand tighten.

STEP 2

Fold the rear seat down, remove the nut at

the base of the seat belt bracket, and slide the

bracket off of the stud.

STEP 1

Empty the cargo area of the vehicle.

SB-J-WRUD/10TW1 INSTR_SKU# 011387

Page 5 • JL Audio, Inc., 2019

MID/HIGH FREQUENCY DRIVER FITMENT

A variety of JL Audio coaxial and component systems will t in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6-1/2”- Front Doors

Fits JL Audio Models: C1-650, C1-650x, C2-650, C2-650x,

C3-650, C5-650, & C5-650x

Rear Speaker Size / Location: 6-1/2”- Roll Bar

Fits JL Audio Models: TC1-650, C1-650x, C2-650, C2-650x,

C3-650, C5-650, & C5-650x

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, and “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc. “Ahead of the

Curve”, its respective logo, and“How we play” are trademarks of JL Audio, Inc.

(954) 443-1100

www.jlaudio.com

JLA-SKU# 011387 • ver. 04.11.2019 • 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

CONGRATULATIONS!

You have completed the installation for this model! Enjoy your new Stealthbox®!

How we play.™

SB-J-WRUD/10TW1 INSTR_SKU# 011387

STEP 12

Fold the rear seat back up.

ST E P 11

With the enclosure aligned, fully tighten the

3/8 - 16 x 1” Button Head Bolt and the factory

seat belt nut. Then fully tighten both of the

3/8 - 16 x 1” Hex Head Bolts and M8 1.25 Hex

Flange Lock Nuts.

STEP 10

Align the threaded inserts on the back of the

enclosure with the holes in the Rear Brackets.

Slide a 3/8” Serrated Spring Washer and a 3/8

Flat Washer over a 3/8 - 16 x 1” Hex Head Bolt,

thread the assembly through the Rear Bracket

and into the threaded insert, and hand tighten.

Repeat for the second bracket.

STEP 9

Align the threaded insert on the front of the

enclosure with the hole in the Front Bracket.

Slide a 3/8” Serrated Spring Washer and a 3/8”

Flat Washer over a 3/8 - 16 x 1” Button Head

Bolt, thread the assembly through the Front

Bracket and into the threaded insert, and hand

tighten.

This manual suits for next models

Other JL Audio Subwoofer manuals

JL Audio

JL Audio Stealthbox 011180 User manual

JL Audio

JL Audio 12W3v3-2 User manual

JL Audio

JL Audio Stealthbox SB-GM-SLVCTR2/10W3v3 User manual

JL Audio

JL Audio 8W1v2-4 User manual

JL Audio

JL Audio 10W1v3-2 User manual

JL Audio

JL Audio Stealthbox SB-GM-TAHOCNSL/10W1v2 User manual

JL Audio

JL Audio Stealthbox SB-SC-XB/12W3v3 User manual

JL Audio

JL Audio 10W6AE User manual

JL Audio

JL Audio Stealthbox SB-S-LWAG/10W6v2/DG User manual

JL Audio

JL Audio 10W1v2-4 User manual

JL Audio

JL Audio 10W3 User manual

JL Audio

JL Audio FS110-W5 Series User manual

JL Audio

JL Audio 12W1v3-2 User manual

JL Audio

JL Audio 8W1v3-4 User manual

JL Audio

JL Audio 10TW3-D4 User manual

JL Audio

JL Audio 15W3v2-D2 User manual

JL Audio

JL Audio Stealthbox SB-GM-TRKEXT/10W1v2/BK User manual

JL Audio

JL Audio 10W5-D4 Speci?cations User manual

JL Audio

JL Audio Stealthbox SB-GM-BURBCNSL/10W3v2 User manual

JL Audio

JL Audio Stealthbox SB-KW-TRX4/10TW3 User manual

JL Audio

JL Audio 8W3v2 User manual

JL Audio

JL Audio Stealthbox SB-P-987C/13TW5v2 Operating and maintenance instructions

JL Audio

JL Audio Stealthbox SB-T-CAM/12W3v3 User manual

JL Audio

JL Audio Stealthbox SB-GM-C6CONV/8W3v3 User manual

Popular Subwoofer manuals by other brands

Sony

Sony XS-AW8 operating instructions

Sony

Sony XS-L836 Specifications

B&C Speakers

B&C Speakers 15 HPL 76W Specifications

Velodyne

Velodyne DD-18+ Specifications

Sonance

Sonance Cinema Series SUB 10-150 Specifications

Hifonics

Hifonics HW-12 Owners & installation manual

Magnat Audio

Magnat Audio ADR 130 BP user manual

Blitz

Blitz BZP106 Specifications

Technics

Technics SB-AS500 Operaing instructions

Lyngdorf

Lyngdorf BW-2 owner's manual

Lyngdorf

Lyngdorf BW-3 owner's manual

Pyle Pro

Pyle Pro PYLE PRO PDW15125 owner's manual

REL Acoustics

REL Acoustics Q Series operating instructions

Pioneer

Pioneer Elite S-W1EX Service manual

L-Acoustics

L-Acoustics KIVA SB15M Rigging manual

B&C Speakers

B&C Speakers Woofer 12 HPL 76 specification

KEF

KEF KUBE 200 installation manual

Yamaha

Yamaha SW500 owner's manual