JiGMO JVR-32 User manual
JVR-32 Voice Recorder
0
JVR-32 VOICE RECORDER
User Manual
customer@jigmoworld.com
JVR-32 Voice Recorder
1
1. Parts and Controls
1.Headphone jack
2.Record/Save button
3.Rewind/Previous file button
4.Fast forward/Next file button
5.Volume up button
6.Volume down button
7.Pilot light
JVR-32 Voice Recorder
2
8.Screen
9.Pause/Play button
10.Speaker
11.USB port
12.Power switch
13.Expansion CARDS
14.Menu button
The back of the recorder has various markings
identifying the various buttons. Please refer to
these for the functions.
2. Before You Start
Please read this carefully before using the
product.
Multifunction Keys: The keys have multiple
functions, but for quick reference, here is what
you need:
PLAY button: for playback & stop / in
menu, similar to ENTER key on a computer
JVR-32 Voice Recorder
3
keyboard
+ or –keys: for volume or Deleting files
(hold down to access at the home screen)
Menu or M button: for switching between
Record mode or MP3 mode (briefly press
to switch) / for Settings (hold key down) /
acts like the ESC key on a computer
keyboard in any menu mode
>> or << keys: To skip ahead (briefly
press) / Scroll (when playing a file or in
menu)
Protecting Files: Please do not turn OFF power
in Recording Mode or your current recording in
session will not be saved.
Interference: To prevent electronic interference,
please keep this recorder away from other
electronic devices and strong magnetic fields.
Backup: We recommend backing up your files to
a computer regularly to prevent loss of data. Your
JVR-32 Voice Recorder
4
recordings are in a folder called RECORD.
Transfer of Data: Do not disconnect the
recorder from your computer during the data
transfer process to prevent data loss.
Standby Mode: If there is no activity for 5
minutes, the recorder will power off automatically
and go to standby mode. You may adjust these
settings in the settings menu under “Auto Switch
Off”. To restart the recorder in this state, please
hold down PLAY for a few seconds.
3. Charging
Please connect the recorder to your computer via
the USB cable (supplied). The power switch on
the recorder may be ON or OFF. Insert the micro
USB end of the cable to the recorder, and the
USB end to the USB port of a computer which is
ON. You may also use
a phone charger.
JVR-32 Voice Recorder
5
When the recorder is charging, the screen will
show the battery charge indicator at the top right.
Do not yank out the USB cable from the recorder
(nor leave it in a location accessible to children
during the charging process).
Please always safely eject the device first and
then remove it. This will prevent damage to the file
structure on the device.
4.Turning Power On
Slide the power switch up to
turn on the recorder.
5.Turning Power Off
Slide the power switch down to
switch OFF your recorder.
6. Recording and Saving Files
JVR-32 Voice Recorder
6
Slide the REC/SAVE switch towards REC to
enter recording mode.
Place the recorder so that the built-in
microphones face the direction of the source.
Place the recorder so that the built-in
microphones face the direction of
the source to be recorded.
The new file will be automatically
recorded as the last file in the
current folder.
Now slide down the REC/SAVE
button”to “SAVE”to stop and
save your recording.
(NOTE: If you turn the power
JVR-32 Voice Recorder
7
off without saving your recording first, your
file will be lost).
TIP: If you want to make several recordings at
short notice, simply keep the recorder in REC
mode and use the PLAY button to pause and
resume the recording as required. Remember to
keep saving your files every few pauses.
7. Playing Your Recording
Once your file is saved to the
device, you will see it as a file
name with numbers (please see
image on right).
Press PLAY or “ ” to play your
recording or a music file. The file
starts playing and you can hear
it over the built-in speaker or
earphones.
Press “M” on the side of the device to switch
between the Recorder Mode or MP3 mode.
Press “ ” or “”button to select the file you
want to play, and then press PLAY to start
JVR-32 Voice Recorder
8
playing the file.
Press “ ”or “ ” button to adjust the volume.
Press PLAY to Pause play.
Playback on a computer: Please use
Windows Media Player on Windows or
VLC Media Player on Mac, Windows or
Chrome operating systems.
8. “A-B”Repeat Play
This is useful for creating
a loop within a file to
listen to.
While a file is playing,
press “M” to select “A”
(the starting point of
your intended loop).
Once “A” starts flashing on the screen, as the
file keeps playing, press “M” again at a point in
the file you want your loop to end. This will be
selected as “B”. This will be the end point of
your loop. Now the loop “A-B” will start
JVR-32 Voice Recorder
9
repeating.
Press “M” again to cancel "A-B" playback.
Once selected, it will repeat and play back the
A-B interval
Press “M” again to cancel.
9. Deleting Files
When the recorder
is in standby mode
(not playing a file),
select the file you
want to delete, hold
down “ ”or “ ”key
to enter the Delete
screen.
Press " " or " " buttons to
select “No”/“Yes”/“Delete all”.
Press PLAY to confirm your choice.
“No”：Cancel the Delete process.
“Yes”：Delete a single file.
“Delete all”：Delete all files in folder.
Press the PLAY button to confirm.
Other manuals for JVR-32
1
Other JiGMO Voice Recorder manuals
