Jetter JetViewMobile 104 User manual
User Manual
JVM-104-O08
HMI
60884475_01
We automate your success.
This document has been compiled by Jetter AG with due diligence based on the state of the art as
known to them. Any revisions and technical advancements of our products are not automatically made
available in a revised document. Jetter AG shall not be liable for any errors either in form or content, or
for any missing updates, as well as for any damage or detriment resulting from such failure.
Jetter AG
Graeterstrasse 2
71642 Ludwigsburg
Germany
Phone
Switchboard +49 7141 2550-0
Sales +49 7141 2550-663
Technical hotline +49 7141 2550-444
E-mail
Technical hotline [email protected]
Sales [email protected]
www.jetter.de
Translation of the german original User Manual
Revision 4.12.1
Date of issue 4/3/2023
Jetter AG Table of contents
User Manual – JVM-104-O08 iii
Table of contents
1 Introduction ....................................................................................................................................... 5
1.1 Information on this document .................................................................................................. 5
1.2 Typographical conventions...................................................................................................... 5
2 Safety................................................................................................................................................ 6
2.1 General Information................................................................................................................. 6
2.2 Purpose ................................................................................................................................... 6
2.2.1 Intended use................................................................................................................ 6
2.2.2 Usage other than intended .......................................................................................... 6
2.3 Warnings used in this document.............................................................................................. 7
3 Product description ........................................................................................................................... 8
3.1 Design...................................................................................................................................... 8
3.2 Product features ...................................................................................................................... 8
3.3 Nameplate ............................................................................................................................... 9
3.4 Scope of delivery ..................................................................................................................... 9
4 Technical data................................................................................................................................... 10
4.1 Dimensions .............................................................................................................................. 10
4.2 Mechanical specifications........................................................................................................ 10
4.3 Electrical properties ................................................................................................................. 11
4.3.1 Ports and interfaces..................................................................................................... 11
4.4 Environmental conditions......................................................................................................... 12
4.5 Display ..................................................................................................................................... 12
4.6 Acoustic signal generator ........................................................................................................ 12
4.7 EMI values............................................................................................................................... 13
5 Mechanical installation...................................................................................................................... 14
5.1 Requirements for the installation location................................................................................ 15
5.2 Preparing for installation.......................................................................................................... 16
5.3 Installing the HMI..................................................................................................................... 17
6 Electrical connection ......................................................................................................................... 19
6.1 Pin assignment ........................................................................................................................ 20
6.1.1 M12 male connector – voltage supply, CAN, ignition .................................................. 20
Jetter AG Table of contents
User Manual – JVM-104-O08 iv
7 Identification and Configuration ........................................................................................................ 21
7.1 Operating system..................................................................................................................... 21
7.1.1 Operating system update of the HMI........................................................................... 21
7.2 File system............................................................................................................................... 24
7.2.1 Features ...................................................................................................................... 24
8 Programming .................................................................................................................................... 26
8.1 Abbreviations, module register properties and formats ........................................................... 26
8.2 CANopen STX API .................................................................................................................. 27
8.2.1 STX Functions ............................................................................................................. 27
8.2.2 CANopen object directory............................................................................................ 28
8.3 Storage options - Overview ..................................................................................................... 29
8.3.1 Operating system memory .......................................................................................... 29
8.3.2 File system memory .................................................................................................... 29
8.3.3 Application program memory....................................................................................... 30
8.3.4 Special registers .......................................................................................................... 30
8.3.5 Flag.............................................................................................................................. 30
8.3.6 Storing registers and variables .................................................................................... 31
8.4 Control elements...................................................................................................................... 32
8.4.1 Input keys .................................................................................................................... 32
8.4.2 Digipot ......................................................................................................................... 33
8.5 Ignition and OFF delay ............................................................................................................ 34
8.6 Saving and loading an application program ............................................................................ 36
9 Registers - Overview......................................................................................................................... 37
10 Maintenance ..................................................................................................................................... 45
10.1 Repairs .................................................................................................................................... 45
10.2 Return and disposal................................................................................................................. 45
10.3 Storage and shipment.............................................................................................................. 46
11 Service .............................................................................................................................................. 47
11.1 Customer service..................................................................................................................... 47
12 Spare parts and accessories ............................................................................................................ 48
12.1 Accessories ............................................................................................................................. 48
Jetter AG Introduction | 1
User Manual – JVM-104-O08 5
1 Introduction
1.1 Information on this document
This document forms an integral part of the product and must be read and under-
stood prior to using it. It contains important and safety-related information for the
proper use of the product as intended.
Target groups This document is intended for specialists with appropriate qualifications.
Only competent and trained personnel is allowed to put this device into operation.
During the whole product life cycle, safe handling and operation of the device
must be ensured. In the case of missing or inadequate technical knowledge or
knowledge of this document any liability is excluded.
Availability of
information Make sure this document is kept at the ready in the vicinity of the product
throughout its service life.
For information on new revisions of this document, visit the download area on our
website. This document is not subject to any updating service.
Start | Jetter - We automate your success.
For further information refer to the following information products:
■JetSym software Online Help
Detailed description of software functions with application examples
■Application-oriented manuals
Cross-product documentation
■Version updates
Information about new versions of software products or of the operating sys-
tem of your device
1.2 Typographical conventions
This manual uses different typographical effects to support you in finding and
classifying information. Below, there is an example of a step-by-step instruction:
üThis symbol indicates requirements which have to be met before executing
the following action.
►This sign or a numbering at the beginning of a paragraph marks an action in-
struction that must be executed by the user. Execute the instructions one af-
ter the other.
ðThe target after a list of instructions indicates reactions to, or results of these
actions.
INFO Further information and practical tips
In the info box you will find helpful information and practical
tips about your product.
Jetter AG Safety | 2
User Manual – JVM-104-O08 6
2 Safety
2.1 General Information
When placed on the market, this product corresponds to the current state of sci-
ence and technology.
In addition to the operating instructions, the laws, regulations and guidelines of
the country of operation or the EU apply to the operation of the product. The op-
erator is responsible for compliance with the relevant accident prevention regula-
tions and generally accepted safety rules.
RoHS 2 The device conforms to the EU directive 2011/65/EU (RoHS 2).
2.2 Purpose
2.2.1 Intended use
The JVM-104-O08 is intended for installation in commercial vehicles and self-pro-
pelled machines. It is an HMI with integrated controller for exchange of data with
peripheral devices.
Operate the device only in accordance with the intended conditions of use, and
within the limits set forth in the technical specifications.
Intended use of the product includes its operation in accordance with this man-
ual.
SELV/PELV If this device is not used in a vehicle or mobile machine, a SELV or PELV power
supply unit must be used to supply the device.
2.2.2 Usage other than intended
This device must not be used in technical systems which to a high degree have
to be fail-safe.
Machinery Directive This device is no safety-related part as per Machinery Directive 2006/42/EC, and
must, therefore, not be used for safety-relevant applications. This device is NOT
intended for the purpose of personal safety, and must, therefore, not be used to
protect persons.
Jetter AG Safety | 2
User Manual – JVM-104-O08 7
2.3 Warnings used in this document
DANGER
High risk
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Medium risk
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Low risk
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
Material damage
Indicates a situation which, if not avoided, could result in mal-
functions or material damage.
Jetter AG Product description | 3
User Manual – JVM-104-O08 8
3 Product description
The JVM-104-O08 is a graphical HMI. Thanks to its compact design and in-
tegrated controller, the HMI is versatile and has been specially developed
for harsh applications in commercial vehicles and self-propelled machines.
3.1 Design
1
13
12
93
48
10 2
67 5
11
11 11
11
Fig.1: Design
1 TFT display
2 F3 key
3 F4 key
4 Home key
5 ESC key
6 Digipot
7 Scroll key
8 Power key
9 F1 key
10 F2 key
11 Screw hole
12 M12 male connector
13 Nameplate
3.2 Product features
■Display: 3.5” TFT, 320x240px
■CPU: ARM11, 500MHz, 128MB RAM, 512MB Flash
■Surface mount model with connector M12x1
■Input: 8 keys, 1 DigiPot
■Ports and interfaces: 1x CAN
■Front/rear degree of protection: IP65/IP65
Jetter AG Product description | 3
User Manual – JVM-104-O08 9
3.3 Nameplate
2
3
4
1
5
Fig.2: Nameplate
1 Logo
2 Serial number
3 Barcode
4 Article number and hardware revision
5 Model code number
3.4 Scope of delivery
Scope of delivery Item number Quantity
JVM-104-O08 10001558 1
Jetter AG Technical data | 4
User Manual – JVM-104-O08 10
4 Technical data
This chapter contains electrical, mechanical data and operating data of the
JVM-104-O08.
4.1 Dimensions
119.8
27.955
83
O3.1
4 x
55.3
5.6 28.4
66.5
104.9
Fig.3: Dimensions in mm
4.2 Mechanical specifications
Parameter Description Standards
Weight 350g
Vibration
Broadband noise 10Hz / 0.005(m/s2)2/Hz DINEN60068-2-64
200Hz / 0.02(m/s2)2/Hz
300Hz / 0.01(m/s2)2/Hz
350Hz / 0.002(m/s2)2/
Hz
Duration 3x 24h
Shock resistance
Type of shock Half-sine wave DINEN60068-2-27
Intensity and duration 30g (300m/s2) for
18ms
Number and direction 18shocks in all 6direc-
tions
Degree of protection
Front panel IP65 DINEN60529
Rear panel IP65
Tab.1: Mechanical specifications
Other manuals for JetViewMobile 104
2
This manual suits for next models
1
Table of contents
Other Jetter Recording Equipment manuals
