Jetson JOURNEY User manual
JOURNEY
ELECTRIC BIKE
TABLE OF CONTENTS
What’s in the Box 3
Features & Specs 6
Attaching the Handlebar 7
Attaching the Fender and Headlight 8
Attaching the Front Disc Brake 9
Attaching the Front Tire 10
Attaching the Seat 12
Attaching the Pedals 13
Charging the Battery 14
Operating the Journey 15
LCD Display 16
Pedal Assist Mode 17
Connecting to Bluetooth® 18
Riding the Journey 19
Care and Maintenance 20
Safety Warnings 21
Safey Checklist 23
3
4
1. WHAT’S IN THE BOX
1. FRONT TIRE
2. HEADLIGHT
3. HANDLEBAR
4. CHARGING PORT
5. SEAT CLAMP
6. SEAT
7. FRONT DISC BRAKE
8. KICKSTAND
9. CHARGER
10. CHARGING CABLE
10
9
1
2
3
4
5
6
8
7
Assembling the Journey should take between 30-35 minutes (including unboxing).
5
2. FEATURES & SPECS
• Product Dimensions: 72” x 26” x 44”
• Weight Limit: 300 lbs / 136 kg
• Product Weight: 42 lbs / 19 kg
• Recommended Age: 13+
• Tire Size: 27.5”Cruiser Tires
• Pedal Assist: 9 Levels
• Shimano Gears: 7-Speeds
• Max Speed: Up To 20 mph / 32 km/h
• Max Range: Up To 30 miles / 48 km
• Battery: 36V, 7.8Ah Lithium-Ion
• Motor: 250W Hub Motor
• Charger: 110-240V
• Charge Time: Up To 6 Hours
• Climbing Angle: Up To 15°
6
3. ATTACHING THE HANDLEBAR
3.1 3.2
3.3
Remove the 4 bolts from the Metal
Guard on the Handlebar Stem.
Then, remove the Metal Guard.
Place the Handlebar into the
Handlebar Stem. Make sure the
markings on the Handlebar are
centered.
Replace the Metal Guard by
tightening the 4 bolts.
Please Note: Assembling the Journey should take between 30-35
minutes (including unboxing).
7
4. ATTACHING THE FENDER AND HEADLIGHT
Connect the Support Bars to
the Fender using the small bolt
in the Fender.
Small
Bolt
Connect the Support Bars to
the Front Fork using the 2 small
screws and 2 washers.
Small screw
and washer
Connect the Fender and Headlight
to the Front Fork using the Large Bolt
and Washer.
Connect the two small wires to
the back of the Headlight.
4.1 4.2
4.3 4.4
8
5. ATTACHING THE FRONT DISC BRAKE
Connect the Front
Disc Brake to the
Front Fork using
the 2 bolts
2 Bolts
5.1
5.2
9
6. ATTACHING THE FRONT TIRE
6.1 6.2
6.3 6.4
Remove the plastic protector from
the Fork. Then, Slide the Front Tire
between the Fork.
Hook the Fork onto both sides of
the tire and slide the Disc Brake
into the Disc.
Quick Release
Spring
Cap
Remove the Cap and one Spring
from the Quick Release.
Slide the Quick Release through
the Front Tire. Then, place the
Spring and Cap back onto the
Quick Release.
10
Other manuals for JOURNEY
1
Table of contents
Other Jetson Scooter manuals
Jetson
Jetson Corona Ryder User manual
Jetson
Jetson SATURN User manual
Jetson
Jetson BOLT User manual
Jetson
Jetson E-POCKET User manual
Jetson
Jetson Obsidian Kick Scooter User manual
Jetson
Jetson Runner User manual
Jetson
Jetson V8 SPORT JSPV8 User manual
Jetson
Jetson PROTON User manual
Jetson
Jetson Nova User manual
Jetson
Jetson GEN 1 User manual
Jetson
Jetson JQUEST-BLK User manual
Jetson
Jetson Atlas User manual
Jetson
Jetson ESBT-V6 User manual
Jetson
Jetson Copperhead JCOPHD-BLK User manual
Jetson
Jetson TEMPO User manual
Jetson
Jetson BOLT User manual
Jetson
Jetson Orbit User manual
Jetson
Jetson JTWIN-GRN User manual
Jetson
Jetson Quest User manual
Jetson
Jetson JBYOD-3KIK User manual
