Jet 98-2202 User manual
Assembly Instructions
Infeed and Outfeed Tables (Stock No. 98-2202)
for use with Model 22-44 Plus Drum Sander
Numbers in parentheses refer to Figure 2 and
the breakdown on reverse side.
1. Bolt the base bracket (2) to the sander with
two 3/8”-16 x 1” hex head cap screws (3)
and two 3/8” flat washers (4). Tighten the
screws.
2. Mount the table (1) to the base bracket (2)
with four 1/4"-20 x 3/4" carriage bolts (5),
four 1/4" flat washers (6) and four 1/4" hex
nuts (7). Note: Leave the carriage bolts
loose for now.
3. Place a straight edge on the conveyor bed
and extending out over the extension table.
Raise or lower the extension table until it is
level with, or slightly below, the surface of
the conveyor belt. Tighten the hex nuts (7).
4. Repeat for the opposite side.
Figure 1
Figure 2
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-98-2202
Ph.: 800-274-6848 Revision C2 01/2014
www.jettools.com Copyright © 2014 JET
Parts Breakdown for the 22-44 Plus Infeed and Outfeed Table
Index Part
No. No. Description Size Qty.
1..........2244PLUS-501 .............Table.....................................................................................................2
2..........2244PLUS-502 .............Base Bracket.........................................................................................2
3..........TS-0060051..................Hex Head Cap Screw.........................................3/8”-16UNC x 1” .........4
4..........TS-0680041..................Flat Washer........................................................3/8”.............................4
5..........2244PLUS-505 .............Carriage Bolt ......................................................1/4"-20UNC x 3/4"......8
6..........TS-0680021..................Flat Washer........................................................1/4" ............................8
7..........TS-0561011..................Hex Nut..............................................................1/4" ............................8
Table of contents
Other Jet Sander manuals
Jet
Jet JWDS-1632-M User manual
Jet
Jet SandSmart 16-32 Plus User manual
Jet
Jet JWDS-1020 Service manual
Jet
Jet JSG-233A-M User manual
Jet
Jet JWDS-1632 Service manual
Jet
Jet JOVS-10 Service manual
Jet
Jet 22-44 Pro-3 User manual
Jet
Jet JSG-31A User manual
Jet
Jet OES-80CSM User manual
Jet
Jet 22-44 OSC User manual
Jet
Jet SandSmart 16-32 Plus Service manual
Jet
Jet J-4200A Service manual
Jet
Jet SandSmart 16-32 Plus User manual
Jet
Jet J-4210 Service manual
Jet
Jet JAT-740 Application guide
Jet
Jet JSG-6DC User manual
Jet
Jet JOSS-S Service manual
Jet
Jet JSM-6100v User manual
Jet
Jet JSG-6DC Service manual
Jet
Jet OES-80CS Service manual
