Jensen JiSS-115 User manual
Portable Docking CD Music System for iPod
Owner’s Manual
JiSS-115
(iPod Not Included)
Please read this Instruction Manual carefully before
using the unit and retain it for future reference
CD814 IPOD JENSEN IM 120V GB CUS1 1 2010/1/12 02:01:46
IMPORTANT SAFETY INSTRUCTIONS
The Caution marking is located at the bottom of the unit
The rating plate is located at the back of the unit
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE UNIT, KEEP THESE INSTRUCTIONS. RETAIN THIS
BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in
electric shock or re hazard. The safeguards incorporated in this unit will protect you if you observe
the following procedures for installation, use and servicing. This unit does not contain any parts that
can be repaired by the user.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
The symbol for class II (Double insulation)
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL
The exclamation point
within the triangle is a
warning sign alerting you
of important instructions
accompanying the
product
The lightning ash and
arrow head within the
triangle is a warning
sign alerting you of
"dangerous voltage"
inside the product
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS
VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1
CD814 IPOD JENSEN IM 120V GB CUS2 2 2010/1/12 02:01:47
9. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in anyway, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. The apparatus shall not be exposed to dripping or splashing and that no objects lled with
liquids, such as vases, shall be placed on apparatus.
16. Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the mains
plug should be disconnected form the mains socket outlet completely.
17. Battery shall not be exposed to excessive heat such as sunshine, re or the like.
IMPORTANT NOTE
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting
it from mains supply and removing all the batteries. Wait at least for 5 seconds before reconnect the
AC power cord or reinstall the batteries.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT.
FULLY INSERT.
IMPORTANT SAFETY INSTRUCTIONS
(Continued)
2
AC Outlet
AC Plug
CD814 IPOD JENSEN IM 120V GB CUS3 3 2010/1/12 02:01:47
WARNING
Follow the advice below for safe operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Place the unit on a at and even surface.
• Do not restrict the air ow of the unit by placing it in a place with poor air ow, by covering it with a
cloth, or by placing it on a carpet.
ON SAFETY
• When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the
cord may damage it and create hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord
and remove all batteries.
ON AC VOLTAGE
• Before use, check that the rated voltage of your unit matches your local voltage.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form
inside the CD player.
• When there is condensation inside the unit, the unit may not function normally.
• Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the
unit before use.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualied
personnel.
This product contains a low power laser device.
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED
AVOID EXPOSURE TO BEAM
3
CD814 IPOD JENSEN IM 120V GB CUS4 4 2010/1/12 02:01:47
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
PROTECT YOUR FURNITURE!!
This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate
the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid
leaving any marks or stains on your furniture. However certain types of oil based furniture polishes,
wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a
rubber residue on the furniture.
To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive
felt pads, available at hardware stores and home improvement centers everywhere, and apply these
pads to the bottom of the rubber ‘feet’ before you place the product on ne wooden furniture.
4
CD814 IPOD JENSEN IM 120V GB CUS5 5 2010/1/12 02:01:47
1. FUNCTION BUTTON
2. POWER / STANDBY BUTTON
3. VOLUME CONTROL
4. CARRYING HANDLE
5. CD DOOR
6. FM STEREO INDICATOR
7. LCD DISPLAY
8. CD DOOR OPEN / CLOSE AREA
9. PLAY / PAUSE BUTTON
10. B-SKIP BUTTON
11. F-SKIP BUTTON
12. PLAY MODE BUTTON
13. PROGRAM/CLOCK-ADJ. BUTTON
14. STOP BUTTON
15. TUNING CONTROL
16. BAND SWITCH
17. SPEAKER
18. iPod CONNECTOR
19. AC SOCKET
20. BATTERY COMPARTMENT
21. TELESCOPIC ANTENNA
22. AUX. IN JACK
9
11
15
16
2
1
10
4
3
6
17
17
18
5 7
8
13
14
12
22
21 20 19
WELCOME
Thank you for purchasing JENSEN JiSS-115 Docking System.
Before operating the unit, please read this manual thoroughly and retain it for future reference.
GETTING STARTED
Unpacking the Docking System
Please save all the original packaging. It provides the safest way to transport your unit.
POWER SOURCE
This Portable Docking System is designed to operate on 120V~ 60Hz AC power or with 8 ‘C” size
(UM-2) batteries (Not included).
CAUTION:
Mains plug should be regularly checked for any damage. If it is damaged do not operate the unit, seek
advice from a qualied service technician or contact the distributor of this product via the telephone
number at the back of this instruction manual.
Do not attempt to operate the unit on any other power source as this could cause damage to the unit
and void your warranty.
5
LOCATION OF CONTROLS
CD814 IPOD JENSEN IM 120V GB CUS6 6 2010/1/12 02:01:48
A. BATTERY OPERATION
Note: For best performance and longer operating time, we recommend the use of alkaline-type
batteries.
1. Remove the Battery Door on the back of the unit.
2. Follow the marked polarities and install 8 “C” size (UM-2) batteries.
3. Replace the Battery Door.
IMPORTANT: Be sure that the batteries are installed correctly.
Wrong polarity may damage the unit.
BATTERY CARE
(a) Do not mix old and new batteries.
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
(c) If the unit is not to be used for an extended period of time, remove all batteries. Old or leaking
battery can cause damage to the unit and may void the warranty.
(d) Do not dispose batteries in re. Batteries may leak or explode.
B. AC POWER CONNECTION
1. Insert one end of the power cord to the AC Socket on the back of
the Docking System. The internal battery source will automatically
be disconnected
2. Connect the power cord to an AC 120V~ 60Hz power outlet.
VOLUME
TURNING POWER ON/OFF AND SELECTING FUNCTION
1. Turn the System to ON and OFF by pressing the POWER / STANDBY Button.
2. The function is selected cyclically by pressing the FUNCTION Button:
CD iPod AUX TUNER
Insert eight UM-2
(size C) batteries.
battery door
To AC socket
To AC outlet
STANDBY
FUNCTION
ADJUSTING THE SOUND LEVEL
To Adjust the Volume Level
6
CD814 IPOD JENSEN IM 120V GB CUS7 7 2010/1/12 02:01:49
The clock can only be adjusted and displayed in STANDBY mode.
1. Press the PROGRAM / CLOCK-ADJ. Button,
2. Press F-SKIP or B-SKIP to select 12 or 24 hour format.
3. Press the PROGRAM / CLOCK-ADJ. Button to conrm.
The Hour digit ashes.
4. Press F-SKIP or B-SKIP to adjust the hour.
5. Press the PROGRAM / CLOCK-ADJ. Button to enter when the desired hour is shown.
The Minute digit ashes.
6. Press F-SKIP or B-SKIP to adjust the minute.
7. Press the PROGRAM / CLOCK-ADJ. Button again to conrm when the correct time is shown in
the Display.
CLOCK SETTING
PROGRAM / CLOCK-ADJ.
LISTENING TO THE RADIO
1. Press the POWER / STANDBY Button once to turn on the System. The LCD backlight will light.
2. Press the FUNCTION Button to select TUNER mode.
3. Set the BAND SWITCH to "AM" or “FM” for the desired radio band.
4. Tune to your desired station by turning the TURNING CONTROL.
The frequency of the tuned station will be displayed on the LCD Display.
The FM STEREO Indicator will light when a FM stereo program is received.
5. Adjust the Volume Control to obtain the desired sound level from the Built-in Speakers.
6. To turn the System off, press the POWER / STANDBY Button again. The LCD backlight will go
off.
TUNING
FUNCTION
FM
MHz
AM
FM
BAND
7
CD814 IPOD JENSEN IM 120V GB CUS8 8 2010/1/12 02:01:50
Note: This CD player plays not only commercial CDs, but also self-compiled CD-R/RW discs. Do not
attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.
Notes on CD-R/RW Discs
• Because of non-standardized format denition/production of CD-R/RW, playback quality &
performance are not guaranteed.
• Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as
PC performance, writing software, media ability, etc.
• Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
1. Press the POWER / STANDBY Button once to turn on the System. The LCD backlight will light.
2. Press the FUNCTION Button to select CD mode.
3. Open the CD DOOR by pressing the CD DOOR where OPEN/CLOSE is shown.
4. Carefully place an audio CD with its label side upward in the
CD compartment and close the CD Door.
5. The LCD Display will briey display ashing “- -” and then the
total number of tracks on the CD will appear in the LCD Display
after a few seconds.
6. Press the PLAY/PAUSE Button to start playback. The Play
Indicator “►” will light and the CD will start playing from the
rst track.
7. Adjust the VOLUME CONTROL to obtain the desired sound level
from the Built-in Speakers.
TO INTERRUPT PLAYBACK
8. To suspend playing, press the PLAY/PAUSE Button once.
The Play Indicator will ash.
9. To resume playing, press the PLAY/PAUSE Button again.
The Play Indicator “►” will light steadily in the LCD Display.
PLAY/ PAUSE
PLAY/ PAUSE
FM AM
TIPS FOR BEST RADIO RECEPTION
1. To insure maximum FM tuner reception, the Telescopic Antenna should be fully extended and
rotated to obtain the best possible station reception.
2. The AM antenna is built into the unit. When tuning in AM reception, be sure to place the unit in a
vertical position. To obtain the best AM reception, try repositioning the unit until the best station
reception is obtained.
CD PLAYER OPERATION
8
CD814 IPOD JENSEN IM 120V GB CUS9 9 2010/1/12 02:01:50
SKIPPING AND SEARCHING TRACKS
10. You can choose to play your favorite track directly by pressing
either the B-SKIP or F-SKIP Buttons. The LCD Display will indicate
the track number of the selected track.
11. To locate a particular passage within a track, keep the
B-SKIP F-SKIP Buttons depressed until it is found.
REPEATING PLAYBACK
12. To repeat a particular track, press the PLAY MODE Button once. The REPEAT Indicator appears
in the LCD Display.
13. To repeat the entire CD, press the PLAY MODE Button twice. The REPEAT ALL Indicator lights
in the LCD Display.
14. To cancel the REPEAT function, press the PLAY MODE Button two more times
until the REPEAT / REPEAT ALL Indicator disappears from the LCD Display.
RANDOM PLAYBACK
15. To play the tracks in random, in Stop mode press the PLAY MODE
Button three times. The Random Indicator “ ” will appear in the Display.
16. Press the PLAY/PAUSE Button once. A track is picked at random and playback starts.
17. To cancel the random function, press the PLAY MODE Button again.
18. To stop playback, press the STOP Button once.
19. When you wish to turn the System off, press the POWER / STANDBY Button.
The LCD backlight goes off.
CD PROGRAMMED PLAY
This function allows the tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode. Up to 20 tracks can be programmed.
1. In CD stop mode, press the PROGRAM Button once. “PROGRAM” will appear and Program
No. “P01” will appear briey and then change to “00” and blink together with “PROGRAM” in the
LCD Display to prompt for input.
PROGRAM
PROGRAM / CLOCK-ADJ.
B - SKIP
F - SKIP
REPEAT
REPEAT ALL
9
CD814 IPOD JENSEN IM 120V GB CUS10 10 2010/1/12 02:01:51
Table of contents
Other Jensen Docking Station manuals
Jensen
Jensen JiSS-20 User manual
Jensen
Jensen JIPS-290I User manual
Jensen
Jensen JiMS-252i User manual
Jensen
Jensen JiMS-182 User manual
Jensen
Jensen JIMS-225 User manual
Jensen
Jensen JiMS-185i User manual
Jensen
Jensen JiMS-525 - HD / AM User manual
Jensen
Jensen JiTS-300i User manual
Jensen
Jensen JiSS-600i User manual
Jensen
Jensen JiMS-190 User manual
Jensen
Jensen JiMS-100 User manual
Jensen
Jensen JiMS-200 User manual
Jensen
Jensen JiMS-198i User manual
Jensen
Jensen JiMS-215i User manual
Jensen
Jensen JiMS-525i User manual
Jensen
Jensen JiPS-200i User manual
Jensen
Jensen JiSS-20 User manual
Jensen
Jensen JiMS-520i User manual
Jensen
Jensen JIMS-225 User manual
Jensen
Jensen JIMS-225 User manual
