jbc CF-2B User manual
www.jbctools.com
CF
SOLDER FEED STATION
2
CONTROL UNIT SOLDER FEED IRON
AP130-A
MANUAL
0002801 Reel 0006559
Feeding tube
MANUALPOWER CORD
CL6210 Brass Wool S0331 Sponge
CF / SOLDER FEED STATION
www.j b c to o ls . co m
CF
SOLDER FEED STATION
INSTALLATION
PART NAMES
3
Main switch
Equipotential connection
CONTROL UNIT
AP130-A
SOLDER FEED IRON
Power Cord Socket
Cable collector
Cartridge extractor
Tip cleanning system
Friendly display control
Smart stand
ADJUSTABLE STAND
CABLE COLLECTOR
4
CLEANNING OPTIONS
5
Tap smoothly the cartridge on the wiper profile to
remove the excess of solder
Provides a deeper cleaning on the tip.
CL6205 Inox Wool
TAPPING WIPING
Full set of clean option: sponge, metal wool and brush
S0331 Sponge S0354 Sponge
Use the slots to wipe any posible particle sticked
on the tip
More agressive on the tip than the wool.
CL6220 Brushes
The smoothest cleaning method. The sponge has to be kept wet (not soaked) using distilled water.
Expected life
(hours)*
Sleep
Temp
Working
Temp
Temperature (ºC)
700
600
500
400
300
200
200 225 250 275 300 325 350 375 400 425 450
100
0
HEAT MANAGEMENT
6
JBC stations intelligently manage the tool temperature
and it helps to extended the tip life:
Work mode: Lift tool from the stand and the tool tip
heats up to the selected temperature.
Sleep mode: When the tool is in the stand, the
temperature reduces (preset sleep temperature is
180ºC / 360ºF).
Hibernation mode: After longer periods of inactivity
(pre-set to 30 minutes), the power is cut off and the
tool cools down to room temperature.
Heat management increase tip life which reduces cost of ownership.
0
c
Selected temp.
350
o
C
Power 10%
350
Decrease & move down Increase & move up
Tip temperature
% Instant power supplied to the tool
Access Menu
& Conrm Selection
Main menu
Counters
Tool settings
Exit
1 Reset settings
2
Station settings
3
Tool settings
1
Plugged hours 0
2
Working hours 0
3
Sleep hours 0
1
Fix one temp -----
2
Temp levels set OFF
3
Sleep delay 0 min
4 Counters
5
Program version
4
Hibernation hours 0
5
No tool hours 0
6 Sleep cycles
0
4
Sleep temp 180
0
C
5
Hibernation delay
3
0 min
6
Temp adjust + O
O
C
Tool AP
Tool AP
Back
Back
ORIGINAL PIN: 0105
Station settings
1 Temp unit
Celsius
2
Maximum temp 400
0
C
3
Minimum temp 200
0
C
4
Help text OFF
5 Beep ON
6 Power limit 130W
7
Change PIN
Back
CONTROL SCREEN
SETTINGS MENU
7
WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manu-
facturing defects, covering the replacement of defective parts and
all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
www.jbctools.com
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
0010334-0612
TECHNICAL SPECIFICATIONS
- Temperature selection from 90 to 450°C (±5%).
- Output Peak Power: 130W.
- Safety transformer, mains separator and double isolation.
- CF-2B 230V 50/60Hz. Input fuse: 1A. Output: 23.5V
- CF-1B 120V 50/60Hz. Input fuse: 2A. Output: 23.5V
- CF-9B 100V 50/60Hz. Input fuse: 2A. Output: 23.5V
- Total weight of unit: 2,8 Kg. (6.2 lb)
- Complies with CE standards on electrical safety, electromagnetic compatibility
and ESD protected housing “skin effect”.
- RoHS compliant.
- Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be
thrown in the garbage.
This manual suits for next models
2
Table of contents
Other jbc Soldering Gun manuals
jbc
jbc B iRON 115 User manual
jbc
jbc TESE-A User manual
jbc
jbc CL8010 User manual
jbc
jbc GALE08V-A User manual
jbc
jbc Premium DIR-D series User manual
jbc
jbc Advanced Series User manual
jbc
jbc AL-A Series User manual
jbc
jbc MVE-A User manual
jbc
jbc B-iRON 210 User manual
jbc
jbc Precision B-iRON Station User manual
Popular Soldering Gun manuals by other brands
Vishay Precision Group
Vishay Precision Group Micro-Measurements Mark V Operating and maintaining
ersa
ersa i-CON 1V quick guide
Hakko Electronics
Hakko Electronics FX-100 instruction manual
Weller
Weller WAD 101 operating instructions
Weller
Weller WXD 2 operating instructions
AlienTek
AlienTek T100 user manual
