Jaycar Electronics LA-9011 User manual
LA-9011 GSM/GPS Tracker
User Manual
GSM/GPS Tracker
A GSM and GPS Tracking solution to locate and track the whereabouts of your vehicle in real time via the Internet
on a computer or Smart phone. The device is easy to install with only 2 - 4 wires to connect. Insert a GSM SIM card
(not included) and hide the device away on a metal surface or carpet using the included Velcro adhesive. It works
by sending the vehicle's GPS coordinates via the GSM network to the free online tracking service, which shows the
location on Google Maps. It can also SMS longitude and latitude coordinates to up to 3 mobile phones, as well as
alerts when vehicle exits a pre-determined area or exceeds pre-set speed.
Other features include an engine kill function to remotely disable the petrol pump, and movement sensor to extend
battery life. An SOS/Panic button is also supplied which can send an SMS to the pre-programmed mobile phones.
The built-in rechargeable Li-ion battery will keep the device functioning for up to 4 days when power is
disconnected, which could help you locate the vehicle should it have been stolen and abandoned.
There is no installation or on-going tracking charges. You only pay for the GSM SIM card and service.
INDEX
• Contents
• Before Use
• How to Use
• Platform Operation Guide
• Instruction Description
• Instruction List
• Notes
• Trouble Shooting
• Specifications
Contents
Before Use
1. Installing The SIM Card
Remove the battery cover according to the following diagram below. Remove the battery exposing the SIM card
socket. Push the SIM card metal cover up to release the socket and place the SIM card into the socket (ensure that
the SIM card contact is facing down). Cover the SIM card metal cover and push to the “LOCK” position to lock the
SIM card, and then put the battery in and lock the battery cover.
Note: 1. The tracker uses a 2G GSM network, it uploads tracking only through GPRS. It can not work on a CDMA
or 3G (WCDMA or CDMA2000) network. (Some 3G SIM cards can be used on a 2G GSM network, this
SIM card can be used in this tracker)
2. Please confirm the PIN code of the SIM card is disabled.
3. Before installing or uninstalling the SIM card, please power off the tracker
2. Power ON/OFF
• When power is OFF, please press the “ON/OFF” button until the GREEN LED turns ON.
• When power is OFF, connect the power to12V or24V source, the tracker will power on automatically.
When the power is ON, press and hold the “ON/OFF” button until the GREEN LED flashes to turn the tracker OFF.
When the battery voltage in the tracker is too low, the tracker will power off automatically.
3. LED Flash Indicator
GREEN LED Flashes once :GSM & GPS work correctly
GREEN LED Flashes twice :GSM working correctly, no GPS signal
GREEN LED Flashes three times :GSM & GPS working correctly, battery is low
GREEN LED Flashes four times :GSM working correctly, battery is low and no GPS signal
GREEN LED ON continuously :GSM searching networks
GREEN LED OFF continuously :Power off
GREEN LED Flashes fast :Incoming call or sending an SMS
RED LED Flashes once :Uploading current tracking
RED LED Flashes twice :Can not upload tracking now
4. Recharging & Power Supply
Warning: this tracker is powered by 9-28VDC, high AC or DC voltage may damage the unit, so please check the
power supply first before installation.
For use in a vehicle, it is necessary to connect the tracker to the car battery all of the time, after the back up battery
is full, the built in recharging circuit will stop recharging. If the tracker is not moving, then the tracker will go into
sleep mode to save power draining from the car battery.
Wiring
RED----------12V/24Vcar battery
BLACK------GND (Car Body)
YELLOW----Cut Relay Driving (Immobilizer Control)
WHITE-------External SOS button
5. Restoring To Default (Factory Configuration)
Power off the tracker first, press the “ON/OFF” button and don’t release (remove the battery and place it in the
tracker or connect the power wire to the car battery) to power automatically. A few seconds later the GREEN LED
will flash 10 times and turn ON continuously, Then release the “ON/OFF” button. The tracker is now set to default
configuration.
Notes: After default has been set, all IP / APN / GPRS / TIME ZONE settings are reverted back
to default, all preset phone numbers are deleted and the password is changed to 123456. All the
alarm settings are cancelled, if the IP/APN/GPRS name& password/TIMEZONE are changed. You
need to set these again by sending an SMS.
6. Antenna
The Antenna of GSM and GPS are built in to the tracker.
Please position the tracker away from metals, as this may reduce the GSM and GPS signal.
7. Shock Sensor Control GPS ON/OFF & Power Saving
This tracker has a built in shock sensor, default is SHOCKCONTROL mode. When the tracker begins to move the
tracker will turn on GPS and upload the location automatically, when the tracker stops moving 2 minutes, the
tracker will turn off GPS & GPRS automatically (Stop uploading location).
8. Working Conditions
The working temperature is -20 0C to 60 0C, over this range the tracker may not function correctly.
How To Use
Firstly purchase a 2G GSM phone SIM card, which needs SMS service and incoming caller ID display and GPRS
function. Please disable the PIN code of the SIM card, the SIM card phone number is the tracker number and all
the operations (calling and sending SMS) to the tracker has the same number.
After installing the SIM card in to the tracker, power on the tracker. Send an SMS to the tracker for setting the APN
name and GPRS username & password first, but for some mobile service providers it is not necessary to set an
APN or GPRS user name & password, please call your mobile service provider to confirm these.
Please confirm the tracker can receive the GPS signal and GSM signal (you should be outdoors to get GPS signal,
the green LED will flash once every 4 seconds meaning the GSM and GPS are receiving signal). When the tracker
begins to move, the tracker will upload the location to the website (Default IP is 113.106.89.149, 9066 , you should
set the IP first if the IP is changed. A notice will display on the website if IP is changed).
The Real Time Tracking Platform: www.999gps.com .
Platform username and password is the last 6 digit number of the tracker’s ID number, the label on the back of the
device has the S/N number. This number is the ID number, also user can send an SMS “ID*password” (Tracker
default password is 123456) to the tracker to check the ID number. The user can change the password and user
information (Such as the car number plate and phone number), You can not change the username, login to the
website to see the current location on Google maps, also user can display the history tracking in the specified date
and time.
Platform Operation Guide
Every tracker has a unique user name and password, the user name is the last 6 digit number of the tracker. For
example the tracker ID is:CW0810C12345678901 then the user name on the platform of the tracker is : 678901.
The platform password for this user name also is :678901. Please send an SMS “ID*123456” to tracker to check
the tracker ID.
The user can change the password and user information (Such as a car number plate, or phone number), but you
can not change the user name.
Platform Login:
Visit the website www.999gps.com , select the language version and the login page will display as follows:
Change User Information:
Click the menu “Other” on the top of the page, there will be a pull-down menu. Click the “User Info” button, there will
be a menu as follows:
The “user name” and “upper department” can not be changed. The Expire date, Telephone, Number per page,
real name and address is not necessary to change. The “customized Skis” you can change to Green, Blue or
Orange. If you need to use local maps, you need to select E-map which is “TAB MAP”, otherwise it is not necessary
to change. Google Map is “GOOGLRE map” please do not change this selection, otherwise the map will not
display correctly. The Initial Interface is “initial Google map” please do not change this selection, otherwise the map
will not display correctly. Centre Longitude and centre latitude is the map center location when you login, you can
input the longitude and latitude of your local centre location. Then every time you login it will display the map of
your local location.
Changing The Car Number Plate Display And Phone Number:
After logging in to the platform, the upper left window will display the number plate. Please see the first picture, you
can change the car number plate and car phone number that displays in the upper left window. You cannot change
the department that displays in the upper left window, Click the menu “Basic Data” on the top menu, there will be a
pull-down menu, click the “Terminal Management”, there will be a menu as the above second picture.
The “Terminal ID” and “Department” can not be changed; the “Vehicle name” is the name displayed on the table of
the “Car number plate” in the upper left window. It is also the name of the www.999gps.mobi login name. The
“On-car phone” is the phone display on the table of the “Car phone” in the upper left window; the “car owner” is the
owner display on the table of the “Owner name” in the down right window; the “owner phone” is the owner’s phone
number and this phone will not be displayed on the screen. It is used as a service center to contact the car owner;
the “Protocol type” is “701 Protocol”, (Please don’t change this selection). The “Icon type” is the tracker icon display
on the map window, you can select “Car, Bus, Truck” etc; The others is not necessary to change.
Changing The User password:
Click on the menu “Other” on the top of the page, there will be a pull-down menu. Click the “Modify Password”,
option, there will be another menu. Inputting the old password and new password is ok. The user name can not be
changed by the user.
Platform Tracking Page:
After logging in to the platform, the latest location of all the tracker will display on the map. Every 2 minutes the
display will update the new location of all the tracker, if the tracker is moving then the icon of the tracker is GREEN.
If the tracker has stopped moving then the icon of the tracker is BLUE, if the tracker is alarming, then icon of the
tracker is RED. The icon type (Car, truck, bus etc.) of the tracker you can change in the “Terminal management”.
This page can be used if there is more than one tracker.
Click the left button of the mouse once on any car number plate display in the upper left window, the latest location
of the car will display on the map. This can be used to check the latest car location, also the latest status of the
tracker will display below “Vehicle list” in the bottom right window, click the right button of the mouse once on any
car number plate in the upper left window. There will be a pop up menu, and then move the mouse and click the left
button of the mouse to operate the instructions, such as “real time tracking”, “vehicle state, “tracking playback” etc.
Display Tracking History:
Move the mouse over the car number plate, click the right mouse button to display a pop up a menu. Click the
“Track playback” button, there will be a menu to let you select the date and time (Please note the time period can
not be longer than 24hours).
Select date and time, then click “Confirm”, the tracking will be loaded on to the computer.
Click “OK”, click the “Track playback” menu with. There will be another track display back menu, click the “Play”
menu with left button, the tracking will begin to display on the map.
Real Time Tracking :
Click the right mouse button to display a pop up a menu, then click the “Real time tracking” button. This will track
the selected car in real time. And the information will be updated every 30 seconds.
Over Area Alarm (Geo-Fence Alarm):
This function is set on the platform, after logging in to the website. Click the “Regional fence” menu in the bottom
right window, search and select your car first and click the “Add fence” menu to add a fence to the tracker. First
select a tracker first and then use the left button of the mouse to define the area and right button of the mouse to
end the definition.
You can select in or out of an area alarm, the alarm information will display on the alarm list. Click the menu of
“Remove Fence” or “Clear Fence” which will cancel the over area alarm.
Over Speed Alarm:
This function is set on the platform, after logging in to the website. Click the “Command profile” menu in the bottom
left window. A menu will pop up, search and select your car first then enable the “Set over speed alarm” menu. You
can define the speed of the over speed alarm, stop alarm etc, After defining the speed alarm, the alarm information
will display on the alarm list. You can check and output the alarm list.
Click the menu of the “set over speed alarm” to make the selection disabled.
Listening To The Microphone
Login in to the platform, click the “Listen in” menu in the bottom left window. A menu will pop up,
search and select your car first, and then input the number of telephone that you will use. The “License
Password” is the “verify Password” defined in the “Terminal Management” menu and click “Send”. The instructions
will be sent to the tracker by the platform, then the tracker will call the number that you just input in. When the
phone rings, pick up the call, then you can listen to the microphone in the tracker. The
driver will not know you are listening.
Also you can Send SMS “MONITOR *123456” to the tracker to listen from the microphone around the tracker,
“MONITOR” is a command, “123456” is password. The tracker will call back, pick up the call and listen in.
Cut Oil Power (Remote Turn Off Car Engine)
Login in to the platform, click the “Cut oil power” menu in the bottom left window. A menu will pop up,
search and select your car first, enable the “close circuit” or “Close Oil Supply”, and input the “Verify
Password” defined in the “Terminal Management” menu and click send.
The instructions will be sent to the tracker by the platform, and this will cut the relay connection and the car engine
will be turned off. The same operation, click the “Cut oil power” menu in the bottom left window.
A menu will pop up, enable the “open circuit” or “open Oil Supply” and input the “Verify Password” defined in the
“terminal Management” menu, and click “Send”. The instructions will be sent to the tracker by the platform, and this
Table of contents
Other Jaycar Electronics GPS manuals
