Jay-tech SportCam D528 User manual
Contents
Precautions ...............................................................................1
Product Introduction..................................................................3
Introduction to Appearance and Keypad...................................4
Get Started................................................................................5
Charge the Built-in Lithium Battery ........................................5
Use of Memory Card ..............................................................6
Startup/Shutdown...................................................................7
Conversion between Modes...................................................8
Indicator Light.........................................................................8
Video Recording Mode...........................................................9
Photo Mode ..........................................................................10
Vehicle Mode........................................................................11
Playback Mode.....................................................................12
Connecting the Camera to High-Definition TV.....................14
Application on the Personal Computer.................................14
Application of Remote Control..............................................15
Waterproof Case Using Notice.............................................16
Technical Parameters..............................................................17
1
This user's manual has referred to the latest information we had
when this user’s manual was made. The screen display and
illustrations are used in this user's manual for the purpose of
introducing details of this video camera in a more specific and
direct way. Difference may arise between these displays and
illustrations and the video camera actually available for you due
to difference in technological development and production
batch, under which case, the actual functions of this video
camera shall prevail.
Precautions
Please read the Announcements carefully before using this
video camera for proper and safe operation, so as to bring its
optimum performance into play and extend its service life.
Do not expose the video camera to sunshine directly, nor
point its lens to sunlight. Otherwise, the image sensor of
the video camera may be damaged.
Take good care of the video camera and prevent water or
sand particles from entering the video camera when it is
used on the beach or near to water, because water, sand
particles, dust or component containing salt may damage
the video camera.
Keep the video camera contaminated free of dust and
chemical materials. Place it in a cool, dry and well
ventilated place. Do not place the video camera in a high
temperature, moist or dusty place.
Please check if the video camera can operate normally
before use.
If dirt or stain is accumulated on the video camera or on its
lens, use soft, clean and dry rag to wipe it away gently. If
the video camera or its lens is stained with sand particles,
blow on the lens to get the sand articles away gently. Do
not use cloth to wipe arbitrarily. Otherwise, it may scratch
2
the surface of video camera or its lens.
If it is required to clean video camera surface, firstly blow
away the sand dust accumulated on this surface, and then
wipe the video camera gently with rag or tissue applicable
to optical equipment. Please use the cleaning agent of
video camera for wiping if necessary. Do not use organic
solvent to clean the video camera.
Do not touch the lens surface with fingers.
Please back up the data if the memory card inside this
video camera is used for the first time.
The externally installed memory cards are manufactured
from precise electronic components. Data may be lost or
damaged under the following circumstances:
1) Improper use of the memory card.
2) The memory card is bent, dropped or collided.
3) Place it under high temperature or moist environment
or expose to sunshine directly.
4) Electrostatic or electromagnetic field exists around the
memory card.
5) This memory card is taken out or power supply is
interrupted when this video camera or computer is
connected to the memory card (i.e. during reading,
writing and formatting).
6) Touch the metal contact surface of the memory card
with fingers or metal materials.
3
Product Introduction
This product is small in size and easy for installation.
With high-performance chips, this product can produce
high-definition videos with excellent continuity of dynamic
images, even under low illumination conditions, and
supports H.264 HD video format.
The video mode supports four options: FHD (1920x1080
30fps), HD (1280x720, 60fps), HD (1280x720, 30fps) and
VGA (640x480, 120fps).
This product supports video output and live playback
functions. Videos can be output to high-definition TVs for
playing clear and sharp pictures.
4
Introduction to Appearance and Keypad
Touch screen
TFT LCD
microSD
card slot
HDMI
interface
Tripod socket
Power key
Shutter Key
Reset key
Microphone
USB
interface
Infrared light
Camera lens
Busy light /
Charging light
Screen-off light
Screen-off
light switch
5
Get Started
Charge the Built-in Lithium Battery
To charge the camera, connect it to the computer via the USB
cable. Then, the charge indicator light (red) will be on. After the
camera is fully charged, the charge indicator light will be off.
In general, it can be fully charged after 2-4 hours.
USB
Indicator Light for
charging is on
6
Use of Memory Card
1. Push the microSD card into the card slot according to the
direction instruction beside the slot of memory card till it is
completely inserted.
2. To take out the microSD card, gently press the memory
card inward and it will pop up.
NOTE:
No built-in memory is available in this video camera.
Make sure to insert memory card before using. It is advised to
use microSD card with speed faster than Class 4.
microSD
card
7
Startup/Shutdown
1. Startup: Press and hold the POWER button for 2 seconds.
The screen of the display is activated and the camera is
turned on.
2. Shut down: Press the POWER button again will shut down
the camera.
3. Auto Screen-off: When the idle time of the camera reaches
the automatic screen-off time, it will turn off the screen to
save power. After the screen is turned off, screen-off light
will be on.
4. Shutdown at low battery power: When the battery power
drops to a low level, the icon will appear on the LCD
display. Please charge the battery. When the icon turns
red and flickering, the video camera will be shut down
soon.
8
Conversion between Modes
The camera has four modes: Video recording mode, Photo
mode, Vehicle mode and Playback mode. These modes can be
switched over by clicking the icon on the upper left corner of the
LCD display after startup.
Video recording mode Photo mode
Vehicle mode Playback mode
Indicator Light
Busy indicator light (Blue):
When the camera is working (e.g. recording videos, shooting
pictures, automatic screen-off, etc.), the busy indicator light will
blink.
Charging indicator light (Red):
It indicates the camera is being charged. After the camera is
fully charged, it will go off.
Table of contents
Other Jay-tech Camcorder manuals
Popular Camcorder manuals by other brands
Panasonic
Panasonic AG-HMC152EN operating instructions
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p user guide
MYDLINK
MYDLINK DCS-6100LH Quick installation guide
Sony
Sony video Hi8 Handycam CCD-TR555 operating instructions
SECURECOM
SECURECOM V-5014B installation guide
Panasonic
Panasonic HDC-SD100 operating instructions
