Jasic Arc 140 User manual

MODEL:ARC200(Z104)/ARC200(Z276)ARC140(Z269)/

ARC200D(Z225)/ARC250D(Z226)/ARC250(Z227)

INVERTER WELDER

OPERATOR’S MANUAL

FORWARD

SHENZHEN JASIC TECHNOLOGY CO., LTD.

Address: No. 3, Qinglan 1st Road, Pingshan District, Shenzhen, Guangdong, China

Postcode: 518118

Tel: 0755-29651666

Fax: 0755-27364108

Website: http://www.jasictech.com E-mail: sales jasictech.com

Version A0:

SAFETY

Precautions for installation

Beware of electric shock!

Install grounding device according to application standard.

Do not touch live parts with naked skin, wet gloves or wet clothes.

Be sure you are insulated from ground and workpiece.

Cover the cover plate of the machine before power on to avoid an

electric shock.

Confirm the safety of your working position.

Beware of fire hazard!

Please install the machine on non-combustible materials to avoid

a fire.

Make ensure there are no inflammables near the welding position

to avoid a fire.

Beware of explosion !

Do not install the machine in an environment with explosive gas

to avoid an explosion.

Replacing the components can be dangerous.

Only professionals can replace the components of the machine.

Make sure the connecting wires inside the machine are correctly connected after replacing

the PCBs, and then the machine can be run. Otherwise, there is a risk of damage to

property.

Make sure there are no foreign bodies such as wire leads, screws, gaskets and metal bars

falling into the machine inside when replacing the components.

Precautions for operation

Smoke-may be harmful to your health!

Keep your head away from the smoke to avoid inhalation of waste gas

in welding.

Keep the working environment well ventilated with exhaust or ventilation

equipment when welding.

Arc radiation-may hurt your eyes and burn your skin!

Use proper welding mask and wear protective clothing to protect your

eyes and body.

Use proper mask or curtain to protect onlooker from being injured.

Magnetic field can make cardiac pacemaker a bit wonky!

Stay away from the welding source to reduce the affect of magnetic filed.

Improper use and operation may result in a fire or an explosion!

Welding spark may result in a fire, so please make ensure there are no

inflammables near the welding position, and pay attention to fire safety.

Ensure there is fire extinguisher nearby, and make sure someone has

been trained to operate the fire extinguisher.

Do not weld closed container.

Do not use this machine for pipe thawing.

Hot workpiece can cause severe scald!

Do not touch hot workpiece with bare hands.

Cool the welding torch for a while after continuously working.

Excessive noise does great harm to people’s hearing!

Wear ear covers or other hearing protectors when welding.

Give warning to onlooker that noise may be potentially hazardous to

hearing.

Moving parts may injure your body!

Please keep away from moving parts (like fan).

Each door, panel, cover, baffle plate, and protective device the like

should be closed and located correctly.

Seek professional support when trouble strikes!

When trouble strikes in installation and operation, please inspect

according to related contents in this manual.

If you still cannot understand fully, or you still cannot solve the problem,

Precautions for discard

Pay attention to the following when discarding the welding machine:

Burning the plastic parts such as the front panel may produce poisonous gas.

Dispose it as industrial waste.

Burning the electrolytic capacitors in the main circuit or on the PCBs may cause an explosion.

People with cardiac pacemaker should consult the doctor before carrying

out welding.

please contact the dealer or the service center of JASIC to obtain

professional support.

TABLE OF CONTENTS

ARC200

(Z104)

ARC200

(Z276) AR C 2 0 0 D ( Z 2 25) AR C 2 5 0 D ( Z 2 26)

AR C 2 5 0

(Z 2 2 7 )

65.1 8 6 8 79.6 8

Rated input current(A)

24.3 26 40.8 32.2 24.8 37.4 29.7 14

6 7.1 9.4 7.1 9.4 11.3 9.58.2

Rated output (A/V)

Rated duty cycle(%)

No-load voltage(V)

Efficiency (%)

40%

6062

0.7 0.7 0.7 0.7 0.7 0.7

IP21S

85 85 85858585

40%

40%30%

40%

67 70 70 62 6060

20 200~ 20 180~ 20 230~ 20 250~20 0~16

0 60~0 60~0 60~

20 200~

0 100~

20 170~20 140~

1. GENERAL DESCRIPTION

1.1 Model coding

ARC XXX (XXXX)

Product code

Vacancy: single voltage

D: double voltage

Code for rated output current

Inverter DC MMA welder

Figure 1 1: Model coding-

1.2 Technical parameters

Table 1 1: General technical parameters-

Items

Models

Air cooling

Single phase AC230V 50Hz-

AR C 1 4 0

(Z 2 6 9 )

Rated input

power (KW)

Cooling mode

Insulation grade

Power factor

Rated input

capacity KVA( )

Rated input

power supply

Welding

current range (A)

Arc force

current range(A)

AC230V 50Hz

140/25.6 170/26.8 200/28.0 160/26.4 180/27.2200/28.0 230/29.2 250/30.0

Enclosure ingress protection

Single-phase

AC380V 50Hz

3-phase

Single-phase

AC230V 50Hz

Single-phase

AC380V 50Hz

Single-phase

AC380V 50Hz

1. GENERAL DESCRIPTION

ARC200

(Z104)

ARC200

(Z276)

ARC200D

(Z225)

ARC250D

(Z226)

Weight Kg( )

ARC140

(Z269)

ARC250

(Z227)

430 168 312* *312 143 256* * 430 168 312* * 430 168 312* * 430 168 312* * 430 168 312* *

5.04.8 8.0 9.6 9.6 9.6

1.3 Size and weight

Table 1-2: Overall size and weight of the machine

Model

Overall size

(L*W*H)

Figure 1-2: Appearance and size of the machine Unit: mm( )

1. GENERAL DESCRIPTION

Z104

ARC140 (Z269) 1

DKJ16-25(black)2

ARC200 (Z104)

DKJ35-50(black)

ARC200(Z276)

DKJ35-50(black)

10046173

10004613

10046171

10004614

10046174

10004614

10047281

第一章产品概述

1.4 Composition and configuration of the welding machine system

1)Composition

Figure 1-3: Composition of the welding machine system

2 Configuration)

Table 1-3: Configuration of ARC200 Z269( )

Name

Welding machine

Quick plug

Operator’s manual

Table 1-4: Configuration of ARC200 104) (Z

Table 1-5: Configuration of ARC200 276) (Z

Material code

Specification Quantity pcs ( ) Remark

Standard configuration

ARC series

Standard configuration

Name

Welding machine

Quick plug

Operator’s manual

Specification Quantity pcs ( ) Remark

Standard configuration

ARC series

Standard configuration

Name

Welding machine

Quick plug

Operator’s manual

Specification Quantity pcs ( ) Remark

Standard configuration

ARC series

Standard configuration

1. GENERAL DESCRIPTION

Material code

ARC200D(Z225)

ARC250D(Z226)

ARC250(Z227)

10004614

10046196

10004614

10046195

10004614

10046188

10047281

Table 1-6: Configuration of ARC200D 225 (Z )

Table 1-7: Configuration of ARC250D 226 (Z)

Table 1-8: Configuration of ARC250 227 (Z)

1.5 Functions and characteristics of the welding machine

ARC series are inverter welding machines made by our company with advanced inverter

technology. These machines are mature models and with stable performance. This series

includes several single-voltage and double-voltage models.

Name

Welding machine

Quick plug

Operator’s manual

Material code

Specification Quantity pcs ( ) Remark

Standard configuration

ARC series

Standard configuration

Name

Welding machine

Quick plug

Operator’s manual

Specification Quantity pcs ( ) Remark

Standard configuration

ARC series

Standard configuration

Name

Welding machine

Quick plug

Operator’s manual

Specification Quantity pcs ( ) Remark

Standard configuration

ARC series

Standard configuration

DKJ35-50(black)

Great reduction in magnetic and resistance loss obviously enhances the welding efficiency

and energy saving effect.

Advanced VMOS or IGBT inverter technology

High inverter frequency greatly reduces the volume and weight of the welding machine.

Working frequency is beyond audiorange, which almost eliminates noise pollution.

Leading control mode

Advanced control technology meets various welding applications and greatly improves the

welding performance

It can be widely used in acid and basic electrode welding.

Easy arc ignition, little spatter, stable current and good shaping.

Common characteristics of MMA welding machines

Portable, energy saving, with excellent dynamic characteristics and high efficiency, stable

arc, molten pool easy to control, higher no-load voltage, better compensation of power and

arc force, able to meet various welding requirements, applicable to aerial work, field work,

indoor and outdoor decoration, etc.

Characteristics of double-voltage models

It adopts automatic switching mode for voltage.

Unique circuit design prolongs the service life of the capacitor and IGBT.

New air duct design balances the temperature inside the machine and prolongs the service

life of the components and machine.

1. GENERAL DESCRIPTION

Material code

Other manuals for Arc 140

This manual suits for next models

Table of contents

Other Jasic Welding System manuals

Popular Welding System manuals by other brands

Berner

Berner PLASMACUT 54 instruction manual

Pro Spot

Pro Spot PR-155 Assembly instructions

Forney

Forney 210 operating manual

Thermal Arc

Thermal Arc 400S operating manual

Lincoln Electric

Lincoln Electric HANDYMIG 170I Operator's manual

GYS

GYS PROTIG 201 AC/DC Original instructions

TAFA

TAFA 30*8B35 owner's manual

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Technical specifications

ESAB

ESAB Buddy Arc 145 instruction manual

CIGWELD

CIGWELD 636804 use instructions

Red-D-Arc

Red-D-Arc DC-400 Operator's manual

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 owner's manual

Elettro

Elettro HI-MIG 3000 SYNERGIC instruction manual

WIA

WIA Weldmatic 270 CP132-2 Operator's manual

Sonics

Sonics H520T instruction manual

Miller

Miller Big Blue 400D owner's manual

NewArc

NewArc RT2000 Operational manual

Hypertherm

Hypertherm powermax1000 Operator's manual