Jøtul F481 User guide

Jøtul F 480

UK - Installation and operating instructions 2

FR - Manuel d’installation et d’utilisation 18

ES - Instrucciones para instalación 35

IT - Manuale di installazione ed uso 52

NL - Installatie- en montagehandleiding 69

Jøtul F480

Manual Version P01

Jøtul F 481 Jøtul F 483

The manuals which are enclosed with the product must be kept throughout the product’s entire service life.Les

manuels fournis avec le produit doivent être conservés pendant toute la durée de vie du produit. I manuali inclusi

con il prodotto vanno conservati per l’intera durata di vita del prodotto.

ENGLISH

Table of contents

1.0 Technical data .........................................2

2.0 Relationship to the authorities..................2

3.0 Safety.......................................................3

4.0 Installation ...............................................6

5.0 Daily Use................................................12

6.0 Maintenance...........................................13

7.0 Servicing ................................................14

8.0 Optional Extras.......................................17

9.0 Recycling................................................17

10.0 Warranty ................................................17

On all our products there is a label

indicating the serial number and

year. Write this number in the

place indicated in the installation

instructions.

Always quote this serial number

when contacting your retailer or

Jøtul.

les combustibles recommandés.

Respectez les consignes d'utilisation. Utilisez uniquement

Verwenden Sie nur empfohlenen Brennstoffen.

Montage- und Bedienungsanleitung beachten.

Follow user`s instructions. Use only recommended fuels.

standard

Certificate/

The appliance can be used in a shared flue.

Minimum distance to adjacent combustible materials:

Emission of CO in combustion products

Serial no: Y-xxxx, Year: 200x

Manufacturer:

N-1602 Fredrikstad

Norway

Jøtul AS

POB 1441

Sweden

EUR Intermittent

Nominal heat output

Norway

Country

Operational type

Fuel type

Operation range

Efficiency

Klasse II

Classification

Standard

Flue gas temperature

Room heater fired by solid fuel

Product:

Jøtul

SP Sveriges Provnings- och

221546

Forskningsinstitut AB

SP Swedish National

Testing and Research

Institute

Approved by

Minimum distance to adjacent combustible materials:

OGC SP

Serial no.

1.0 Technical data

Material: Cast iron

Finish: Black paint

Type of fuel: Wood

Max. log length: 30 cm

Smoke outlet: Top, rear

Flue pipe dimension: Ø 150 mm

Outside air connection: Alu. ﬂex - Ø 80 mm

Product weight:

Burn chamber: 119 kg

Base, cast iron 46 kg

Pedestal, cast iron 34 kg

Cast iron sides 33 kg

Optional extra Floor plates, Outside air

connection, Rotating set for

the Jøtul F 483

Product dimensions, distances: See Fig. 1

Technical data in acc. with EN 13240

Nominal heat output: 6,0 kW

Flue gas mass ﬂow: 6,0 g/s

Recommended

chimney draught: 12 Pa

Efﬁciency: 75%@6 kW

CO emissions (13% O2): 0,08%

Flue gas temperature: 315oC

Dust: < 20mg/m3n@13%O2

Burn time: 2.2 kg/h

Operational type: Intermittent

Intermittent combustion here means normal use of a ﬁreplace,

i.e. add more fuel as soon as the ﬁre has burned down to

embers.

2.0 Relationship to the

authorities

• Installation of a ﬁreplace must be carried out in compliance

with national laws and regulations. All local ordinances,

including those that refer to national and European

standards, must be complied with when products are

installed.

• The installation can only be put into use after it has been

checked by a qualiﬁed inspector.

• Contact your local building authorities before installing a

new ﬁreplace.

3.0 Safety

NB! To guarantee optimal performance and safety, Jøtul

recommends that its stoves are ﬁtted by a qualiﬁed

installer (see www.jotul.com for a complete list of dealers).

Any modiﬁcations to the product by the distributor, installer or

consumer may result in the product and safety features not

functioning as intended. The same applies to the installation of

accessories or optional extras not supplied by Jøtul. This may

alsobethecaseifparts that areessentialtothefunctioningand

safety of the ﬁreplace have been disassembled or removed.

In all these cases, the manufacturer is not responsible or liable

for the product and the right to make a complaint becomes null

and void.

3.1 Fire Prevention Measures

There is a certain element of danger every time you use

your ﬁreplace. The following instructions must therefore be

followed:

• The minimum safety distances when installing and using

the ﬁreplace are given in ﬁg. 1.

• Ensure that furniture and other ﬂammable materials are

not too close to the ﬁreplace. Flammable materials should

not be placed within 1 metre of the ﬁreplace.

• Allow the ﬁre to burn out. Never extinguish the ﬂames with

water.

• The ﬁreplace becomes hot when lit and may cause burns

if touched.

• Only remove ash when the ﬁreplace is cold. Ash can

contain hot embers and should therefore be placed in a

non-ﬂammable container.

• Ash should be placed outdoors or be emptied in a place

where it will not present a potential ﬁre hazard.

In case of chimney ﬁre:

• Close all hatches and vents.

• Keep the ﬁrebox door closed.

• Check the loft and cellar for smoke.

• Call the ﬁre service.

• Before use after a ﬁre an expert must check the ﬁreplace

and the chimney in order to ensure that it is fully functional.

3.2 Floor

Foundation

Youneedtomakesurethefoundationissuitablefor a ﬁreplace.

See “1.0 Technical Data” for speciﬁed weight.

We recommend the removal of any ﬂooring that is not attached

to the foundation (“ﬂoating ﬂoors”) beneath the installation.

Requirements for protection of wooden

ﬂooring beneath the ﬁreplace

The product has integrated ﬂoor protection and may therefore

be placed directly on a wooden ﬂoor.

Any inﬂammable ﬂoor coverings, such as linoleum, carpets,

etc. must be removed from under the product.

Requirements for protection of

inﬂammable ﬂoors in front of the ﬁreplace

Thefront plate must comply with national laws and regulations.

Contact your local building authorities regarding restrictions

and installation requirements.

3.3 Walls

Distance to walls made of combustible material - see ﬁg. 1a

Distance to combustible wall protected by firewall: See ﬁg. 1b

The ﬁreplace may be used with an uninsulated ﬂue pipe

provided the distances between the ﬁreplace and walls made

of combustible materials are as shown in ﬁg. 1a.

NB: Pay particular attention to this when using revolving

pedestal!

ENGLISH

Fig. 1 a

Jøtul F 481 Jøtul F 483 Brennbar vegg

Min. distance to furniture /

combustible material = 900 mm

900168-P01

740

1180

440

1025

145

154 1034

1189

460

230 128

466

Min. 2180

350

583

120

*100

360

*340

120

*100

360

*340

120

*100

350

*330

580

*560

350

583

360

*340

120

*100

739

509

Min. distance to combustible wall

Distance to combustible wall with rotating pedestal

* Semi-insulated chimney / shielded flue pipe

Min. measure floorplate

X/Y =Acc. to national standards

and regulations

Hole in floor for external air supply

Ø 80 mm connection

Jøtul F 483

Hole in floor for external air supply

Ø 80 mm connection

Jøtul F 481

Combustible ceiling

Jøtul F 483 with rotating set

ENGLISH

Fig. 1 b

Jøtul F 481 / F 483

100

450

1110

433

200

660

280

1330

665

433

200

280

825

640

410

290

725

640

725

410

900168-P01

Min. distance to combustible wall protected by firewall

External

Integrated

Combustible wall

Firewall

460

Air supply

TheamountofcombustionairforJøtul’sproductsisapproximately

20-40 m3/h. The outside air connection may be ﬁtted directly to

the Jøtul F 480 through:

• The base/pedestal or

• through a ﬂexible supply hose from the outside/chimney

(only if the chimney has its own duct for external air) and to

the product's outside air connector.

Fig. 2A, through an outside wall

Fig. 2B, through the ﬂoor and ground plate

Fig. 2C, through the ﬂoor and basement

Fig. 2D, indirectly through an outside wall

4.0 Installation

NB: Check that the ﬁreplace is undamaged before installation

begins.

NB:The product is heavy! Ensure youhave helpwhen positioning

and installing it. Make sure the product does not topple over.

NB: Do not place anything on the top plate of the stove as this

could cause permanent damage to the paint/enamel.

NB: Read the Installation and Operating instructions carefully

before installing the ﬁreplace!

4.1 Prior to installation

The standard product comes in three or more consignments

One with the burnchamber, one with the base or pedestal and

side panels.

You will need the following tools to install the product: Spirit

level, ratchet with 10 mm and 13 mm sockets,Torx T 20 and

hex keys with 5 mm socket.

Fig. 3

1. Removethe packaging(cardboard and woodenframe) and

spread the cardboard out on the ﬂoor behind the ﬁreplace.

Remove the white foam plastic in the top.

2. Remove the screws attaching the burnchamber to the

transport pallet.

3. Leave the stove standing on the transport pallet.

4. Remove the top plate (A) with the top grate (B).

5. Remove the gloves and bowl from the ash pan. Place the

bowl on the top grate right up to the end if the ﬂue pipe is

rear-mounted.

6. Check that the control handles (C) move freely.

ENGLISH

4.2 Installation

External air supply through the base

Through the ﬂoor

1. NB! If connecting the Flex Hose through a hole in the ﬂoor,

do not knock out the removable cover plates (Fig. 5 A).

Through the rear outlet in the base

Fig. 4

2. If connecting a ﬂex hose through the rear outlet of the

base, the shelf (A) and the internal back plate (B) must be

removed ﬁrst.

Fig. 5

3. If connecting a ﬂex hose (Ø 80 mm) for external air supply

to the external air connector beneath the burn chamber,

the removable cover plates (A) must be knocked out ﬁrst

Installation of base/pedestal on the

burnchamber

Fig. 5

4. Carefully lay the stove down on its back. Rest the stove on

a pallet and three packaging frames.

Fig.6

Fig. 7

5. Before installing the base, the shelf (Fig. 4-A) and internal

back plate (Fig. 4-B) must be removed. Push the base

up to the burn chamber and secure it ﬁrmly with the four

screws (M8 x 25 mm) and washers provided. See Fig. 7 B.

ENGLISH

Fig. 9

6. Loosen the height adjustment screws slightly (A) beneath

the product so that they can be screwed by hand. NB: If the

optional glass ﬂoor plate is to be installed, the base must

be raised approximately 8 mm off the ﬂoor so that it can be

pushed under the front edge of the base.

Fig. 10

7. Carefully remove the wooden pallet.

8. Place a packaging frame (A) crosswise underneath the

base/pedestal/leg and cardboard packaging in front of/

beneath the product to prevent it from making marks on

the ﬂoor. Carefully raise the stove and stand it in its proper

place (ﬁg 1). Remember to position it straight above or

behind the external air supply, whichever is applicable.

9. Place the top plate (ﬁg. 3 A) temporarily in place and

level the ﬁreplace. If the stove is not standing level, adjust

the screws shown in ﬁg. 9 A until the product is perfectly

straight.

10.If the control handles (Fig. 3C) are difﬁcult to pull out, see

step 4.6

4.9 Location of approval label

The approval label must always be affixed to the wire and

positioned as illustrated in ﬁg. 11.

Fig. 11, Base

Fig. 11, Pedestal

ENGLISH

Installation with external air supply

Fig. 12 - Base

10 cm

Fig. 12 - Pedestal

10 cm

1. Attach the hose to the external air connector using a hose

clip (NB! Do not ﬁt a hose clip onto the Jøtul F 483 pedestal

with a rotating set as this prevents the set from rotating).

NB! Make sure the hose is long enough so that joints

are not necessary. The external air hose insulation ends

approx. 10 cm below the burn chamber.

2. Reﬁt any parts that have been removed from the product.

4.3 Chimney and ﬂue pipe

• The ﬁreplace must only be connected to a chimney and

ﬂue pipe approved for solid fuel ﬁreplaces with ﬂue gas

temperatures as speciﬁed in «1.0 Technical Data».

• The cross-section of the chimney must be designed to ﬁt

the ﬁreplace. Use «1.0 Technical Data» to calculate the

correct chimney cross-section.

• The chimney must be connected in accordance with the

installation instructions of the chimney supplier.

• Before a hole is made in the chimney, the product should

be test-mounted in order to correctly mark the position of

the ﬁreplace and the hole in the chimney. See ﬁg. 1 for

minimum dimensions.

• Make sure that the ﬂue pipe rises all the way up to the

chimney.

• With a rear outlet, use a ﬂue pipe bend with a sweep hatch

to allow sweeping.

• Please note that it is extremely important for connections

to have a degree of ﬂexibility. This is to prevent any

movement in the installation leading to the formation of

cracks.

• For recommended chimney draught, see «1.0 Technical

Data». For ﬂue pipe dimensions with the relevant cross-

section, see “1.0 Technical Data”.

NB! The minimum recommended chimney length is 3.5 m

from the ﬂue pipe insert. If the draught is too strong, a ﬂue

pipe damper can be installed and used to reduce the draught.

ENGLISH

Fitting a ﬂue pipe with a top outlet

With a top outlet, the ﬂue pipe is installed after the outer sides

have been installed. See Chapter 4.6.

Fitting a ﬂue pipe with a rear outlet

The product is supplied from the factory with the smoke outlet

ﬁtted for the top outlet. Proceed as follows for installation with

a rear outlet:

1. Place the product in the correct position. See Fig. 1.

Fig. 13

2. Remove the lower exhaust deﬂector (A) by tapping/sliding

it forwards and out. Hold it while doing this so that it does

not fall down.

3. Pull the bafﬂes (B) forwards, lift slightly, turn and lower

them.

Fig. 14

4. Be sure to note how the exhaust deﬂectors (A) are

positioned before removing them to ensure that they are

ﬁtted back into exactly the right place. Take hold of the pin

(B) on the underside of the exhaust deﬂectors, lift them up

slightly and then sideways before lowering and removing

them from the burn chamber.

Fig. 15

5. Unscrew the cover for the rear outlet on the inside of the

burn chamber and take it out through the door opening.

6. Attach the smoke outlet (A) to the inside of the burn

chamber where the cover was. Note that it must be turned

so that the ﬂue pipe can be pushed into place from the

outside.

7. Place the gasket (B) from the bag of screws around the

edge of the ﬂue pipe and push it into the smoke outlet.

8. Install the smoke outlet cover where the outlet was.

9. Reﬁt the exhaust deﬂector and bafﬂe.

NB: It is important for the joints/ﬂue pipes to be sealed

completely. Air leaks may prevent them from operating

properly.

ENGLISH

This manual suits for next models

Table of contents

Languages:

Other Jøtul Stove manuals

Jøtul

Jøtul GF 370 DV MV Owner's manual

Jøtul

Jøtul GF 500 DV IPI User manual

Jøtul

Jøtul GF 400 BV Sebago User manual

Jøtul

Jøtul GF 100 DV II Nordic QT User manual

Jøtul

Jøtul GF 400 DV Sebago User manual

Jøtul

Jøtul F 163 User manual

Jøtul

Jøtul GF 400 CF User manual

Jøtul

Jøtul Gas Atra 740 DS User manual

Jøtul

Jøtul F 232 User manual

Jøtul

Jøtul GF 100 DV II Nordic QT User manual

Jøtul

Jøtul MF 3 User manual

Jøtul

Jøtul GF 373 BF User manual

Jøtul

Jøtul GF 370 DV Guide

Jøtul

Jøtul GF 600 DV Firelight User manual

Jøtul

Jøtul GF 300 BV Allagash User manual

Jøtul

Jøtul GF 400 BV Sebago User manual

Jøtul

Jøtul GF 3 BF User manual

Jøtul

Jøtul GF 400 BV Sebago User manual

Jøtul

Jøtul GF 300 BV Allagash User manual

Jøtul

Jøtul FS 74 User manual

Jøtul

Jøtul F 500 Oslo User manual

Jøtul

Jøtul Lillehammer User manual

Jøtul

Jøtul GF 520 DV Owner's manual

Jøtul

Jøtul Wood Stove User manual

Popular Stove manuals by other brands

Arada

Arada Cassette Stove installation guide

Parmco

Parmco FS 600 Installation and operating instructions

MCZ

MCZ SUITE AIR 10 M2 installation guide

HearthStone

HearthStone Stowe DV 8321 Owner's manual & installation guide

Cattara

Cattara FAMILY manual

Stanley

Stanley Argon F500 OVAL Installation and operating instructions

Avalon

Avalon B-VENT instructions

Nordpeis

Nordpeis Vega user manual

Exquisit

Exquisit EKC601-5 Instructions for use and installation

Stanley

Stanley Oisin Oil MK II Installation and operation instruction

Thermocet

Thermocet Brookfield S/CC Operating and installation instructions

HASE

HASE delhi operating instructions

Vermont Castings

Vermont Castings Intrepid 2 User instructions

Italiana Camini

Italiana Camini CLASSICA Installation, use and maintenance

Avalon

Avalon Vashon Avanti DVS FS manual

Spartherm

Spartherm ambiente a1 Installation and operating manual

Dimplex

Dimplex MCFSTV12AU manual

Warmlite

Warmlite WL46040 manual