IXIA XG12 User manual
XG12 Chassis Assembly Guide
Version 1.0
Release 8.20 EA,
December 2016
Copyright and Disclaimer
Copyright © 2016 Ixia. All rights reserved.
This publication may not be copied, in whole or in part, without Ixia's consent.
Ixia, the Ixia logo, and all Ixia brand names and product names in this document are
either trademarks or registered trademarks of Ixia in the United States and/or other coun-
tries. All other trademarks belong to their respective owners.
The information herein is furnished for informational use only, is subject to change by Ixia
without notice, and should not be construed as a commitment by Ixia. Ixia assumes no
responsibility or liability for any errors or inaccuracies contained in this publication.
RESTRICTED RIGHTS NOTICE
As prescribed by FAR 27.409(b)(4) and in accordance with FAR 52.227-14, please take
notice of the following.
(a) This proprietary computer software and/or software technical data is submitted with
restricted rights. It may not be used, reproduced, or disclosed by the Government
except as provided in paragraph (b) of this notice or as otherwise expressly stated in
the applicable contract.
(b) This computer software and/or software technical data may be—
(1) Used or copied for use with the computer(s) for which it was acquired, including
use at any Government installation to which the computer(s) may be transferred;
(2) Used or copied for use with a backup computer if any computer for which it was
acquired is inoperative;
(3) Reproduced for safekeeping (archives) or backup purposes;
(4) Modified, adapted, or combined with other computer software, provided that the
modified, adapted, or combined portions of the derivative software incorporating
any of the delivered, restricted computer software shall be subject to the same
restricted rights;
(5) Disclosed to and reproduced for use by support service Contractors or their sub-
contractors in accordance with paragraphs (b)(1) through (4) of this notice; and
(6) Used or copied for use with a replacement computer.
(c) Notwithstanding the foregoing, if this computer software and/or software technical
data is copyrighted computer software and/or software technical data, it is licensed to
the Government with the minimum rights set forth in paragraph (b) of this notice.
(d) Any other rights or limitations regarding the use, duplication, or disclosure of this
computer software and/or software technical data are to be expressly stated in, or
incorporated in, the applicable contract.
(e) This notice shall be marked on any reproduction of this computer software, in whole
or in part.
(End of notice)
ii XG12 Chassis Assembly Guide, Release 8.20 EA
Contacting Ixia
Contacting Ixia
Corporate
Headquarters
Ixia Worldwide Headquarters
26601 W. Agoura Rd.
Calabasas, CA 91302
USA
+1 877 FOR IXIA (877 367 4942)
+1 818 871 1800 (International)
(FAX) +1 818 871 1805
sales@ixiacom.com
Web site: www.ixiacom.com
General: info@ixiacom.com
Investor Relations: ir@ixiacom.com
Training: training@ixiacom.com
Support: support@ixiacom.com
+1 818 595 2599
EMEA Ixia Europe Limited
Part 2nd floor,
Clarion House, Norreys Drive
Maidenhead, UK SL6 4FL
+44 (1628) 408750
FAX +44 (1628) 639916
salesemea@ixiacom.com
Support: support-emea@ixiacom.com
+40 21 301 5699
Asia Pacific Ixia Pte Ltd
210 Middle Road
#08-01 IOI Plaza
Singapore 188994
Support: support-asiapac@ixi-
acom.com
+91 80 4939 6410
Japan Ixia KK
Nishi-Shinjuku Mitsui Bldg 11F
6-24-1, Nishi-Shinjuku, Shinjuku-ku
Tokyo 160-0023
Japan
Support: support-japan@ixiacom.com
+81 3 5326 1980
India Ixia Technologies Pvt Ltd
Tower 1, 7th Floor, UMIYA Business Bay
Cessna Business Park
Survey No. 10/1A, 10/2, 11 & 13/2
Outer Ring Road, Varthur Hobli
Kadubeesanahalli Village
Bangalore East Taluk
Bangalore-560 037, Karnataka, India
+91 80 42862600
Support: support-india@ixiacom.com
+91 80 4939 6410
China Ixia Technologies (Shanghai) Company Ltd
Unit 3, 11th Floor, Raffles City, Beijing
Beijing, 100007 P.R.C.
Support: support-china@ixiacom.com
400 898 0598 (Greater China Region)
+86 10 5732 3932 (Hong Kong)
C h a n g e : 4150211, D a t e : S e p t e m b e r 2 4 , 2 0 1 3
XG12 Chassis Assembly Guide, Release 8.20 EA iii
[This page intentionally left blank]
XG12 Chassis Assembly Guide, Release 8.20 EA v
Contents
Contents
Contacting Ixia iii
Introduction 1
XG12 Chassis Modules 3
Install XG12 Chassis 5
XG12 Chassis Installation Precautions 5
Un-pack and Mount the Chassis 6
Remove and Insert Processor Module 7
Remove and Insert Power Supply Module 8
Power Cords 10
Remove and Insert Fan Module 11
Log on to XG12 Chassis 13
[This page intentionally left blank]
Introduction
This document describes how to install the XG12 chassis and its various modules.
The XG12 Chassis is the next generation high performance platform capable of supporting
all XM form factor load modules, including full chassis configurations of the Xcellon-Flex
load modules. It is a 12-slot chassis with increased total power capacity available for all
load modules and front-to-back airflow delivery along with increased bandwidth from the
CPU to the load modules.
The chassis provides improved modularity and access to the major components to reduce
downtime of a failed chassis and to reduce the probability of needing to remove a failed
chassis from the test environment.
Figure: XG12 Chassis
XG12 Chassis Assembly Guide, Release 8.20 EA 1
[This page intentionally left blank]
XG12 Chassis Modules
The modules that make up the chassis are as follows:
lChassis Frame Module
lChassis Fan Module
lChassis Power Supply Module
lChassis Processor Module
The Processor Module is plugged into the front of the chassis. The power supplies and fans
are accessible from the rear of the chassis. Each of the modular components is capable of
being removed in the field and replaced with minimum downtime.
Figure: XG12 Chassis Back View
XG12 Chassis Assembly Guide, Release 8.20 EA 3
[This page intentionally left blank]
Table of contents
Other IXIA Chassis manuals
