Intermec Oracle-Ready CK31 Manual
CK31 Handheld Computer Operator’s Guide
Battery
latch
�
You should use this operator’s guide if you use the CK31 daily to perform your job. This guide contains basic operating information to help you use
the CK31.
Turn on the CK31.
Press I (the Power key) to turn on the CK31.
When you turn on the CK31, the screen turns on.
If the screen does not turn on, install a charged
battery.
Check the battery level.
Change beeper volume.
Scan a bar code.
Point the CK31 at the bar code.
Press the Scan button or pull the trigger.
If your CK31 has a laser scanner, a red spot or narrow
beam of light appears near the bar code.
If your CK31 has an imager, a wide beam of light appears
near the bar code.
Move the CK31 so the spot or beam is centered on the bar
code. When the Good Read light turns on, the bar code
has been scanned.
1
2
3
Press I to turn o the
CK31.
Press down on the latch
and lift the battery out of
the CK31.
Insert the tabs on the
new battery into the
bottom of the opening.
Press the battery in
place to snap the latch.
Press and release C (the Green key), and then press
and release E to change the beep volume.
1
2
3
If the battery is low, change it.
Turn on the backlight.
Press E (the Backlight key) to turn on the
backlight. The backlight makes the screen
easier to see in dark areas.
Depending on the kind of scanner your CK31 has, you may
need to move the CK31 closer to or farther from the bar code.
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK31 Handheld Computer Operator’s Guide
*075388-001*
P/N 075388-001
Icons appear on
the screen when
the battery is
not fully charged.
I
I
4
CK31 Handheld Computer Operator’s Guide
Using the Screen Icons
While you use the CK31, icons appear at the bottom of the screen to help you keep track of the battery and network connections. See the next table
to learn what the icons mean.
Icon Means
Battery is half full. You should be able to work for several more hours before changing batteries.
Battery is almost empty. You need to install a charged battery as soon as possible.
Battery is empty. Install a charged battery right away!
Excellent radio connection to the network.
Good radio connection to the network. You might need to move to get a better connection.
Bad radio connection to the network. Try moving until you get a better connection.
No radio connection to the network. You need to move until you get reconnected.
You pressed the Orange key.
You pressed the Green key.
Orange key is locked. Press the Orange key again to unlock it.
Green key is locked. Press the Green key again to unlock it.
Using the Keypad
See the next illustration to nd the locations of the Power (I), Backlight (E), Orange (B), Green (C), Backspace, and Esc keys on your CK31.
More Information
For more information on operating the CK31, see the CK31 Handheld Computer Quick Start Guide (P/N 075205) or the CK31 Handheld Computer User’s
Manual (P/N 075207).
Backspace
key
7 8 9
1 2
0.
3
456
F
1
F
2
F
3
F
4
A
B
C D
E
F
G
H I
J
K
L
M N
O
P
Q
R
S
T
U
V
W
Y
I /
O
Other manuals for Oracle-Ready CK31
11
Table of contents
Other Intermec Handheld manuals
Intermec
Intermec CK30A User manual
Intermec
Intermec CN50 User manual
Intermec
Intermec 700 Series User manual
Intermec
Intermec CK70 RFID User manual
Intermec
Intermec CK1 Serial Dock User manual
Intermec
Intermec CN51 User manual
Intermec
Intermec CN70 RFID User manual
Intermec
Intermec 700 Series User manual
Intermec
Intermec CK3a User manual
Intermec
Intermec CN2B User manual
Intermec
Intermec CN4NI User manual
Intermec
Intermec IP30 User manual
Intermec
Intermec CS40 Vehicle Power Adapter User manual
Intermec
Intermec CK32 User manual
Intermec
Intermec CK70 RFID User manual
Intermec
Intermec CK3R User manual
Intermec
Intermec CN50 User manual
Intermec
Intermec NORAND 600 User manual
Intermec
Intermec CN30 User manual
Intermec
Intermec CN51 User manual
