Intermec Janus 2050 User manual

P/N 065716-001

User’s

Manual

JANUS

™

2050

Vehicle-Mount Computer (4MB)

P/N 065716-001

User’s

Manual

JANUS

™

2050

Vehicle-Mount Computer (4MB)

IntermecCorporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

1997 by Intermec Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Duratherm, Precision

Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or registered trademarks of

Intermec Corporation.

CardID™ and CardSoft™ are trademarks of SystemSoft Corporation. Some of the information in this

manual is based on copyrighted material contained in the CardSoft™ 3.1 Software User’s Guide,

published by SystemSoft Corporation, 1992-1994, Natick, Massachusetts.

Throughout this manual, trademarked names may be used. Rather than put a trademark (™ or )

symbol in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.

code 39

nuggetnugget

Contents

iii

Contents

Before You Begin xv

Warranty Information xv

Safety Summary xv

Warnings and Cautions xvi

Terms and Conventions xvii

Suggested Reading xix

Getting Started

Overview of the JANUS 2050 1-3

Starting the JANUS 2050 for the First Time 1-6

Unpacking the JANUS 2050 1-6

Mounting the JANUS 2050 on a Vehicle 1-6

Connecting the JANUS 2050 to the Vehicle Power Supply 1-9

Attaching the Antenna 1-10

Connecting a Scanning Device to the JANUS 2050 1-11

Turning On the JANUS 2050 for the First Time 1-13

Turning the JANUS 2050 On and Off 1-13

Setting the Time and Date 1-14

Entering Data 1-14

Using a Laser Scanner 1-15

Scanning Techniques 1-16

JANUS 2050 Accessories 1-17

Where Do You Go From Here? 1-17

Operating the JANUS 2050

Using the JANUS 2050 Features 2-3

The JANUS 2050 Keypad 2-5

How to Type the Characters Printed on the Keypad 2-6

Using the Keypad 2-6

Ctrl, Alt, and Shift Keys 2-6

Compound Function Key 2-7

Additional Keys 2-7

Cursor Keypad 2-7

Numeric Keypad 2-7

Entering ASCII Characters 2-8

JANUS 2050 Vehicle-Mount Computer User’s Manual (4MB)

International Keypads 2-9

DOS Code Pages 2-9

Alpha Keys With Multiple Characters 2-9

Numeric Keys With Multiple Characters 2-9

Alt and Shift Keys 2-9

Special Characters 2-10

International Keypad Examples 2-10

Terminal Emulation (TE) Keypads 2-14

Accessing TE Commands on the Keypad 2-15

Shift Key 2-15

Ctrl and Alt Keys 2-15

Compound Function Key 2-15

Booting the JANUS 2050 2-16

Performing a Cold Boot 2-16

Performing a Warm Boot 2-16

Understanding the Status LEDs 2-17

Display Modes 2-19

Understanding Audio Signals and Beep Sequences 2-20

Estimating Power Usage 2-21

Recharging the Backup Battery 2-21

Defining JANUS 2050 Drives 2-22

Drive C 2-22

Drive D 2-22

Drive E 2-23

PC Card Drive (G) 2-23

Memory Management 2-24

Using the JANUS Software

Software Provided With the JANUS 2050 3-3

What Software Is Provided on the Companion Disks? 3-4

Using DOS Commands 3-5

Defining the Startup Files 3-6

AUTOEXEC.BAT File 3-6

CONFIG.SYS File 3-8

code 39

nuggetnugget

Contents

MS-DOS Startup Menu 3-10

Learning How to Change the Contents of Drive C 3-10

Creating a RAM Drive 3-11

Changing Drive C and Configuring for International Languages 3-13

Using Auto-Loader to Change Drive C 3-14

Installing Auto-Loader 3-14

Creating and Loading an Image File 3-16

Creating an Image File 3-18

Loading an Existing Image File 3-20

Using MakeDisk and PutDisk to Change Drives C or D 3-21

Deciding Where to Run MakeDisk 3-21

Creating and Filling the Working Source Directory 3-22

Creating the New Image File 3-23

Loading the New Image File 3-23

Examples of Using MakeDisk and PutDisk 3-24

Using Reader Services 3-28

Understanding the Bar Code Wedge 3-29

Enabling Direct Hardware Wedge Functions 3-30

Using the Wedge Configuration Program 3-30

Configuring the JANUS 2050

Overview of Configuration Parameters 4-3

Configuring for Bar Code Symbologies 4-3

Defining Communications Parameters 4-4

Modifying Operations Parameters 4-5

Different Ways to Configure the JANUS 2050 4-6

Using the Configuration Application 4-7

Entering ASCII Control Characters 4-9

Communications Protocol Characters 4-9

Operation Preambles and Postambles 4-9

Using Multiple Configuration Files 4-10

Configuring the JANUS 2050 From the DOS Prompt 4-11

Loading a New Configuration File 4-11

Automatically Loading a Configuration File 4-11

Saving a New Configuration File 4-12

Loading the Factory Default Configuration 4-12

JANUS 2050 Vehicle-Mount Computer User’s Manual (4MB)

Editing a Configuration File Using the Host Computer 4-13

Configuring With Bar Code Labels 4-14

Configuring Using IRL Z Commands 4-15

Configuring Through a User Application 4-15

Using PC Cards

Learning About PC Cards 5-3

What Is PCMCIA? 5-3

Supported PC Cards 5-3

Which Memory Cards Are Recommended? 5-4

Which Expansion Cards Are Recommended? 5-4

Accessing the PC Card Drive 5-5

Configuring, Formatting, and Using PC Cards 5-9

Preparing to Use ATA Cards 5-10

Initializing and Formatting an ATA Card 5-10

Using the ATA Card 5-11

Preparing to Use Flash Cards 5-12

Initializing and Formatting a Flash Card 5-12

Erasing a Previously Formatted Flash PC Card 5-14

Preparing to Use I/O Cards 5-15

Configuring the JANUS device to Use an I/O Card 5-15

Resetting the PC Card Drive for I/O Cards 5-16

Preparing to Use SRAM Cards 5-16

Formatting an SRAM PC card 5-17

Using the SRAM PC Card 5-17

Managing the Power on the PC Card Drive 5-17

Managing the PC Card Drivers in the Startup Files 5-18

Drivers in CONFIG.SYS 5-19

Drivers in AUTOEXEC.BAT 5-19

Tips for Enabling PC Card Drivers 5-20

Communicating With the JANUS 2050

Planning the Network Connection 6-3

Choosing a Communications Application 6-4

Choosing a Communications Protocol 6-4

Choosing a Protocol Handler 6-5

code 39

nuggetnugget

Contents

vii

Setting Up the JANUS 2050 for Communications 6-7

Configuring the JANUS 2050 for Communications 6-7

Loading and Unloading Protocol Handlers 6-8

Loading/Unloading Protocol Handlers at the DOS Prompt 6-8

Loading/Unloading Protocol Handlers With a Batch File 6-9

Loading/Unloading Protocol Handlers With IRL Desktop or Communications

Manager 6-10

Specifying a Value for the FIFO Control Register 6-10

Different Ways to Communicate With the JANUS 2050 6-13

Communicating Using the Interlnk/Intersvr Utilities 6-13

Interlnk/Intersvr System Requirements 6-15

Installing Interlnk/Intersvr 6-15

Running Interlnk on the Host Computer 6-16

Running Interlnk on the JANUS 2050 6-17

Interlnk/Intersvr Status 6-18

Redirecting Drives 6-18

Exiting Interlnk/Intersvr 6-18

Restarting Interlnk/Intersvr 6-19

Communicating Using Communications Manager 6-19

Using the Communications Manager Menus 6-19

Using a Command Line 6-21

Downloading Applications Across the Network 6-22

Examples of Using BFT 6-23

Examining a Typical BFT Session 6-25

Preparing the Device and Host Computer for BFT 6-26

Differentiating Between Client and Server 6-27

Starting an Application When the FTA Terminates 6-29

Using FTA Commands on the Device 6-29

Typing FTA Commands on the Device 6-29

Learning the Syntax of FTA Commands 6-30

Editing the FTA Initialization File 6-32

Working With IRL

What Is IRL? 7-3

Using IRL on the JANUS 2050 7-4

Working With Files 7-4

Specifying Data and Program Paths 7-5

Using the Desktop 7-5

Using Commands in the IRL Desktop 7-8

Starting an IRL Program 7-8

JANUS 2050 Vehicle-Mount Computer User’s Manual (4MB)

viii

Exiting an IRL Program 7-9

Downloading an IRL Program 7-10

Transmitting IRL Files 7-10

Receiving IRL Files 7-11

Clearing IRL Files 7-11

Types of Error Messages 7-12

Resuming IRL Programs 7-13

Exiting a Program So You Can Resume It Later 7-13

Exiting Directly to DOS 7-14

Resuming a Program From the DOS Prompt 7-14

Resuming a Program From the IRL Desktop 7-14

Using the IRL Z Command 7-15

IRL File, Clear 7-16

IRL File, Receive 7-17

IRL File, Transmit 7-17

IRL Program, Download 7-18

IRL Program, Exit 7-18

IRL Program, Resume 7-19

IRL Program, Run 7-19

Troubleshooting

Troubleshooting the JANUS 2050 8-3

Powering Up or Booting the JANUS 2050 8-3

Operating the JANUS 2050 8-7

Running IRL 8-9

Using PC Cards 8-10

Using DOS 8-13

Using Configuration Manager 8-16

Using MakeDisk 8-17

code 39

nuggetnugget

Contents

Using PutDisk 8-19

Scanning Bar Code Labels 8-22

Resetting the JANUS 2050 8-23

Returning to the Default Configuration 8-23

Performing a Cold Boot 8-23

Forcing the JANUS 2050 to Turn Off 8-24

Saving Data and Loading Flash Memory 8-24

Saving JANUS 2050 Data 8-24

Loading Flash Memory 8-25

Command Reference

Using JANUS 2050 Commands 9-3

Enter/Exit Accumulate 9-4

Enter Accumulate 9-4

Exit Accumulate 9-5

Backspace, Destructive 9-5

Change Configuration 9-6

Clear 9-6

Command Override 9-7

Enter 9-8

Prepare for Reboot 9-8

Reboot 9-9

Configuration Commands

Using Configuration Commands 10-3

Variable Data 10-4

Address, Multi-Drop 10-5

AFF (Affirmative Acknowledge) 10-6

Baud Rate 10-7

Table of contents

Other Intermec Handheld manuals

Intermec

Intermec CN3NI Manual

Intermec

Intermec 700 Series 700 User manual

Intermec

Intermec CK3R User manual

Intermec

Intermec CK32IS Manual

Intermec

Intermec Janus 2020 User manual

Intermec

Intermec CK71 User manual

Intermec

Intermec 700 Series User manual

Intermec

Intermec PEN*KEY 6400 User manual

Intermec

Intermec 700 Series User manual

Intermec

Intermec CK70 RFID User manual

Intermec

Intermec CK1 Serial Dock User manual

Intermec

Intermec CN3E Series User manual

Intermec

Intermec CK61 User manual

Intermec

Intermec CN3 Series User manual

Intermec

Intermec 6220 Use and care manual

Intermec

Intermec CN50 User manual

Intermec

Intermec CN51 User manual

Intermec

Intermec CK61 User manual

Intermec

Intermec 730 Color User manual

Intermec

Intermec CK31G User manual

Intermec

Intermec CK30 User manual

Intermec

Intermec CN30 User manual

Intermec

Intermec CN2A User manual

Intermec

Intermec CK3a User manual

Popular Handheld manuals by other brands

Honeywell

Honeywell Dolphin 9900 user guide

Honeywell

Honeywell CN75 user guide

MiTAC

MiTAC Mio 168 user manual

Wasp

Wasp WDT92 user manual

Texas Instruments

Texas Instruments TI-Nspire user guide

AXEM Technology

AXEM Technology MBS user guide

Armstrong

Armstrong Brain Wave Hardware & software installation

Unitech

Unitech TB128 user manual

Symbol

Symbol MC9000-G Product reference guide

Unitech

Unitech HT1 1D Batch user manual

Ingenico

Ingenico IWL220 GPRS Quick reference guide

Symbol

Symbol c2000 user manual

Symbol

Symbol MC18 Product reference guide

Acer

Acer n20 manual

Docomo

Docomo F-04H instruction manual

Toshiba

Toshiba e350 Series user manual

Palm

Palm Tungsten E2 supplementary guide

Alien

Alien ALR-H460 user guide