Intermec CN2 User manual

Specifications

Dimensions: Approximately 12 cm x 8.5 cm x

12 cm (4.7 in x 3.3 in x 4.7 in)

Electrical rating: x5V 2A

Requires Intermec AC power supply

(P/N 074246)

v100 to 240V, 50-60 Hz

Operating temperature: 0°C to 50°C (32°F to 122°F)

Storage temperature: -10°C to 50°C (14°F to 122°F)

Relative humidity: 5% to 95% non-condensing

6001 36th Avenue West

Everett, WA 98203

U.S.A.

www.intermec.com

CN2 Communications Dock Quick Start Guide

*074755-001*

P/N 074755-001

CN2 Communications Dock Quick Start Guide

You can use the CN2 Communications Dock (P/N 074248) to:

• provide power to the CN2.

• charge the battery while it is in the CN2.

• transfer data and applications through a USB (universal serial

bus) Type B connection.

This guide describes how to install and use the communications

dock.

Communications dock

CN2Communications Dock QuickStart Guide

Documentation

Shipping Package Contents: This illustration shows the contents of the CN2

communications dock kit.

To use the communications dock you also need these items (sold

and ordered separately):

• USB interface cable (P/N 321-576-002)

• Power supply (P/N 074246)

• Country-specific power cord

You must use the appropriate Intermec power

supply with this device or equipment damage may

occur.

Installing the Communications Dock

1 Place the communications dock on a flat, stable, and clean

surface that is within 1.5 m (5 ft) of an AC outlet.

2 Connect the power supply to the Power port on the back of

the communications dock.

Power

port

USB

port

3 Connect the other end of the power supply to an AC power

outlet.

Power

supply

Power light

The green Power light on the front of the communications

dock turns on. The communications dock is now ready to

charge a battery in a CN2.

Note: The light on the left side of the communications

dock is not used.

4 (Optional) Connect a USB Type B communications cable to

the USB port on the back of the communications dock and

connect the other end of the cable to a USB device.

Charging the CN2

• Remove the serial port plug from the serial port, and place the

CN2 in the communications dock. The battery is fully charged

in approximately 4 hours.

Troubleshooting

If you are having problems operating the communications dock,

make sure that the:

• battery is correctly installed in the CN2.

• CN2 is firmly seated in the communications dock.

• power supply is properly connected to a powered AC outlet.

• charging pins on the communications dock are clean. To clean

the charging pins, rub them with a pencil eraser and remove

any eraser debris.

USB Port Pin Assignments

VBUS

UDC-

UDC

GND

Other manuals for CN2

This manual suits for next models

Other Intermec Docking Station manuals

Intermec

Intermec CK60 Ethernet Multidock User manual

Intermec

Intermec JD2010 User manual

Intermec

Intermec CN3 Series User manual

Intermec

Intermec FlexDock DX2 User manual

Intermec

Intermec FlexDock User manual

Intermec

Intermec AV6 User manual

Intermec

Intermec 6640 User manual

Intermec

Intermec Trakker Antares 2400 User manual

Intermec

Intermec AD8 User manual

Intermec

Intermec AV4 User manual

Intermec

Intermec CK60 Ethernet Multidock User manual

Intermec

Intermec CK61 User manual

Intermec

Intermec FlexDock DX1 User manual

Intermec

Intermec AD8 User manual

Intermec

Intermec CK60 Vehicle Dock User manual

Intermec

Intermec D5020 Quick start guide

Intermec

Intermec TD2410 User manual

Intermec

Intermec Janus 2020 User manual

Intermec

Intermec AV10 User manual

Intermec

Intermec AV5 User manual

Intermec

Intermec FlexDock DX1 User manual

Intermec

Intermec CN2A User manual

Intermec

Intermec 6300 SERIES User manual

Intermec

Intermec AV6 User manual

Popular Docking Station manuals by other brands

Sony

Sony Dream Machine XDR-DS12iP user manual

Acer

Acer USB Type-C Dock II user manual

ATEN

ATEN UC-2000 user manual

Xcellon

Xcellon HDD-202 user manual

Dok

Dok CR09 user guide

Philips

Philips BTM630/12 quick start guide

IOGear

IOGear Travel Pro GUD3C09 quick start guide

RKI

RKI SDM-E2 Operator's manual

iHome

iHome iP15 instruction manual

VITURE ONE

VITURE ONE MOBILE DOCK quick start guide

Lindy

Lindy 42984 user manual

CipherLab

CipherLab 8001 quick guide

Pyle

Pyle PIPDSP2 owner's manual

Avol

Avol AS2350 user manual

Datalogic

Datalogic JoyaTouch quick start guide

Philips

Philips DC190/79 user manual

Targus

Targus DOCK315EUZ user guide

Akasa

Akasa DuoDockX3 AK-DK08U3-BK user manual