Intermatic ET100 SERIES Owner's manual

ET100 SERIES EASY-SET BASIC PROGRAMMING

RESET TIME SWITCH:

1. Place the two position switch to AUTO and the three position

switch to RUN.

2. Press the RESET switch for 3-5 seconds to reset the

microprocessor memory and clear all programmed information. The

display will flash 12:00 AM.

NOTE: Do not press the RESET switch after programming has begun

or you will loose all of your programmed information.

TO SET PRESENT TIME OF DAY:

1. Place the two position switch to AUTO and the three position switch

to TIME SET.

2. Press the HOUR and MIN buttons separately to select the current

time of day. Note that this timer is a 12 hour AM/PM time clock.

TO PROGRAM TIMES :

1. Place the three position switch to PROGRAM. Note that the display

now shows 0:00 1 for Event #1. There are 8 possible programmed

times (events), 4 ON and 4 OFF. All available events need not be

used.

2. Press the HOUR and MIN buttons separately to program the first

ON time desired.

3. Press the EVENT button once. Note that the display now shows

0:00 2 for Event #2.

4. Press the HOUR and MIN buttons for the first OFF time. If more

than 1 ON and 1 OFF time (event) is required per day repeat this

procedure for up to 4 ON and 4 OFF times (events).

5. Return the three position switch to the RUN position and make sure

the two position selector switch is in the AUTO position.

TO REVIEW PROGRAMMED TIMES:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button to review each of the 8 set points.

TO CHANGE PROGRAMMED TIMES:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button until the desired time to change is

displayed.

3. Press the HOUR and MIN buttons separately to change the

displayed time to the new time desired.

4. Press the EVENT button to proceed to the next programmed event

to change if desired and follow previous procedure. If not return the

three position switch to the RUN position.

TO DELETE A PROGRAMMED TIME:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button until the desired time to delete is

displayed.

3. Press the ON/OFF button twice to delete that time. The display will

now show 0:00 and the event number.

4. Return the three position switch to RUN.

TO OVERRIDE PROGRAM:

Program can be overridden at any time by placing the two position

switch to MANUAL. Programmed set times will be maintained but will

not operate the controlled load automatically.

TO MANUALLY OPERATE LOAD:

1. Place the two position switch to either MANUAL or AUTO.

2. Place the three position switch to RUN and depress the ON/OFF

button.

NOTE: The display will show your load toggle ON or OFF.

TO OPERATE TIMER:

Place the two position switch to AUTO and the three position switch to

RUN.

NOTE: When finished programming you may have to toggle your load

ON or OFF depending on the state it should be in at that time by

depressing the ON/OFF button.

NOTE: For assistance please contact Intermatic Technical Services at

815-675-7000.

Table of contents

Other Intermatic Switch manuals

Intermatic

Intermatic GRASSLIN FM1D14 Series User manual

Intermatic

Intermatic T7801B Manual

Intermatic

Intermatic T171 Manual

Intermatic

Intermatic T175CR Manual

Intermatic

Intermatic EMDS User manual

Intermatic

Intermatic Grasslin DTAV40E User manual

Intermatic

Intermatic RC2403RT Service manual

Intermatic

Intermatic T172CR Manual

Intermatic

Intermatic TimeMaster GMX Series User manual

Intermatic

Intermatic T8805P101C Manual

Intermatic

Intermatic IOS-DSIMF User manual

Intermatic

Intermatic R8815P101C Manual

Intermatic

Intermatic EI500 Series Guide

Intermatic

Intermatic T1905 Manual

Intermatic

Intermatic R8806P101C Manual

Intermatic

Intermatic CA600 User manual

Intermatic

Intermatic GrasslinFM1D20 Series User manual

Intermatic

Intermatic ET2805C Manual

Intermatic

Intermatic T1871BR Manual

Intermatic

Intermatic T7402B Manual

Intermatic

Intermatic T105 Manual

Intermatic

Intermatic T1872BR Manual

Intermatic

Intermatic ET716CK User manual

Intermatic

Intermatic T172 Manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual