Intellinet 505093 User manual

FAST ETHERNET

RACKMOUNT

WEB-SMART

SWITCH

INT-505093-UM-0906-01

WITH OPTIONAL GIGABIT PORTS

USER MANUAL

MODEL 505093

TABLE OF CONTENTS

1. Introduction & Features ....................................................3

2. Hardware Installation ......................................................3

3. Software Settings .............................................................4

4. Functions & Conﬁgurations ..............................................6

Port Status ..............................................................................6

Port Conﬁguration ....................................................................6

Trunk Conﬁguration ..................................................................6

VLAN Conﬁguration .................................................................7

Port Monitoring Conﬁguration ....................................................7

QoS Conﬁguration ..................................................................8

Bandwidth Control ..................................................................8

Miscellaneous Operations .........................................................8

5. Web Login .........................................................................9

Setting an IP Address with the Web-Smart Switch .........................9

Logging In with a Web Browser .................................................9

6. Speciﬁcations ..................................................................10

section page

TABLE OF CONTENTS

1. INTRODUCTION & FEATURES

Thank you for your purchase of the INTELLINET NETWORK SOLUTIONS™

Fast Ethernet Rackmount Web-Smart Switch with Optional Gigabit Ports,

Model 505093. Following is an introductory overview of the Web-Smart

Switch features.

• Supports real-time status read/write operation.

• Provides online link status.

• Supports port setting for NWay or force-mode operation.

• One port-based trunk supports speeds up to 800 Mbps.

• Supports load balancing on the trunking port.

• Optional ﬁber-optic module for 100Base-FX application.

2. HARDWARE INSTALLATION

Accessories

• One null modem cable

• One D-sub 9-pin female connector on front panel

• Fiber module (optional) multimodule/single module (ST- or SC-type connector)

Turn off the power to

your PC and Fast Ethernet

Rackmount Web-Smart

Switch, then connect the

null modem cable to the PC

serial port and the Smart

Switch D-sub connector.

NOTE: When you connect

the cable, remember which

serial port you used. (Refer

to Step 3 of Section 3.)

INTRODUCTION / HARDWARE INSTALLATION

Optional Gigabit Ports

(modules not included)

3. SOFTWARE SETTINGS

To open the HyperTerminal program, follow the steps below.

1. Click “Start,” then “Programs,”

then “Accessories,” then

“Communications,” then

“HyperTerminal.”

2. Enter any name you care to on

the New Connection screen,

then click “OK.”

3. In the “Connect using” ﬁeld,

enter the serial port where you

connected the null modem cable

to the PC.

SOFTWARE SETTINGS

4. On the Properties page,

ﬁll in the ﬁelds as shown

below, then click “OK.”

Bits per second: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

5. When you see the

blinking cursor on the next

screen, press any key

for the default settings of

“admin” for the username

and “123” for the

password.

6. When you see this

screen, the PC

conﬁguration is complete.

SOFTWARE SETTINGS

4. FUNCTIONS & CONFIGURATIONS

Port Status

This screen displays

the current status of

each of the ports:

enabled/disabled,

link up/down,

speed/duplex and

ﬂow control.

Port Conﬁguration

On this screen, you’re

able to conﬁgure the

enable state, auto-

negotiation, speed/

duplex and ﬂow

control for each port.

Trunk Conﬁguration

On this screen, you

are able to conﬁgure

the trunk groups. As

many as seven trunk

groups can be

conﬁgured, and you

can arbitrarily select

up to four ports

(port 1 – port 24 or

port 25 – port 26) to create a trunk group.

NOTE: The 10/100 Mbps port cannot be trunked with a gigabit port; plus,

all ports in the same trunk group will be treated as a single port.

If a VLAN group is being used, all of the members in a trunk group must be in

the same VLAN group.

FUNCTIONS & CONFIGURATIONS

Cascaded Connection

By utilizing a combination of

three 24-port Fast Ethernet

Rackmount Web-Smart Switches

and a single 4-port server (as

shown in the ﬁgure at right),

each 24-port Smart Switch is

able to support two trunks, with

each trunk allowing as many as

four ports to be available for use

in a cascaded connection.

VLAN Conﬁguration

VLAN (virtual local area network) is a logical network group that limits the

broadcast domain. It allows

you to isolate network trafﬁc

so only members of the

VLAN receive trafﬁc from

the same VLAN members.

Basically, creating a VLAN

within a switch is logically

equivalent to reconnecting a

group of network devices to another Layer 2 switch. However, all the network

devices are still physically plugged into the same switch.

Port Monitoring Conﬁguration

Port monitoring is

forwarding speciﬁed

direction of packets from

several monitored ports

to a speciﬁed

monitoring port.

FUNCTIONS & CONFIGURATIONS

Server with 4 trunk ports

QoS Conﬁguration

On this screen, you’re

able to conﬁgure the QoS

(Quality of Service) mode,

static port priority and

802.1p priority.

Bandwidth Control

On this screen, you’re able

to conﬁgure the input rate

or the output rate of each

port. If, for example port 1

is 10 Mbps, you can set

its effective output rate to

1 Mbps and its input rate

to 500 kbps.

Miscellaneous Operation

This menu lets you access additional commands/conﬁguration options, with

Password Setting, Restore System Default Setting, Reboot System and Return to

Main Menu leading to

exactly those options. In

addition, Advanced Switch

Conﬁguration lets you alter

parameters for functions

such as BSF, collision retry,

age-out time and more;

System Information offers

details on ﬁrmware version,

chip revision and such.

(Section 5 addresses IP

Conﬁguration.)

FUNCTIONS & CONFIGURATIONS

WEB LOGIN

5. WEB LOGIN

Setting IP Addresses by Console Port

Logging in Web pages

requires setting the proper

IP address. If using the

default IP address —

192.168.1.1 — ﬁrst be

sure that this IP will work in

your network environment.

Otherwise, the IP address,

subnet mask and default

gateway need to be

reconﬁgured: Log in with the console port, then go to the IP Conﬁguration

screen and set the proper IP address.

Logging In with a Web Browser

When you connect to the

Smart Switch with a Web

browser, a login screen is

displayed. Simply enter a

username and password

to log in to access the

switch.

1010

6. SPECIFICATIONS

Standards

IEEE 802.3 (10Base-T Ethernet)

IEEE 802.3u (100Base-TX Fast Ethernet)

IEEE 802.3x (ﬂow control and back-pressure)

IEEE 802.1q (tag-based VLAN)

IEEE 802.1v (port-based VLAN)

General

ANSI/IEEE 802.3 NWay auto-negotiation

Non-blocking, store-and-forward switching architecture

Connectors: 24 10/100 Mbps RJ-45 ports, SMII/GMII interface for optional

Gigabit modules, RS-232 console port

Switch architecture: store-and-forward switch technology

Network cables: Cat3, 4, 5 (UTP/STP)

Performance

Filter/forward rate

10BaseT: 14,880 pps (packets per second)

100Base-TX: 148,800 pps (packets per second)

1000Base-T/SX: 1,480,000 pps (packets per second)

MAC address entries: 14000 with Auto Learning

Buffer size: 512 kBytes

Available Modules

1000Base-T Gigabit Ethernet Module Item 505109 (Copper)

1000Base-SX Gigabit Ethernet Module Item 505116 (Fiber)

LEDs

Power

LINK/ACT for each port

Power Input

Internal power supply: 100 – 240 V AC, 50/60 Hz

Power consumption: max. 35 W

SPECIFICATIONS

Table of contents

Other Intellinet Network Router manuals

Intellinet

Intellinet 524780, 524797, 524872, 524896 User manual

Intellinet

Intellinet 524049 User manual

Intellinet

Intellinet 523646 User manual

Intellinet

Intellinet 523776 User manual

Intellinet

Intellinet 521246 User manual

Intellinet

Intellinet 560535 User manual

Intellinet

Intellinet 530347 User manual

Intellinet

Intellinet 523608 User manual

Intellinet

Intellinet 524803 User manual

Intellinet

Intellinet 530347 User manual

Intellinet

Intellinet 525831 User manual

Intellinet

Intellinet 560559 User manual

Intellinet

Intellinet 522625 User manual

Intellinet

Intellinet 530347 User manual

Intellinet

Intellinet 561044 User manual

Intellinet

Intellinet 516204 User manual

Intellinet

Intellinet 502023 User manual

Intellinet

Intellinet 561457 User manual

Intellinet

Intellinet 524988 User manual

Intellinet

Intellinet 522595 User manual

Intellinet

Intellinet 524377 (Annex b) User manual

Intellinet

Intellinet 561051 User manual

Intellinet

Intellinet 523615 User manual

Intellinet

Intellinet 524636 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview