Intelligent Home Luna User manual

Video Door Entry System

user manual

Luna

www.intelligenthomeonline.com

CAT-5 network cable

●Connect this unit ONLY to other compatible units. Do not connect it to

any other type of alarm or auxiliary device. Connecting anything else

to this unit may damage it or prevent it from operating properly, and will

invalidate the warranty.

●Do not place cables from the AC/DC adapters, camera or monitor where

they can be damaged or stepped on. Protect the cables by keeping

them out of the way of children, pets and routine household trafc. Do

not place heavy objects on power cables; do not cover them with rugs or

carpet.

●Unplug the AC/DC adapters from the wall outlet when the system is not

in use for a long time.

●Slots or openings in the back of the monitor, are provided for ventilation

and to ensure reliable operation of the video monitor or equipment and

to protect if from overheating. These openings must not be blocked or

covered. The monitor should never be placed near or over a radiator and

should not be placed in a built-in installation or enclosure unless proper

ventilation is provided.

●All parts should be protected from violent vibration. Impact shocks and

dropping may damage the product and should be avoided.

●Installation of doorbell camera facing into direct sunlight may affect

quality of the video.

PRECAUTIONS

CONTENT

1. Indoor Monitor ----------------------------- 1

2A. Doorbell Camera(Model A) ------------------- 1

2B. Doorbell Camera(Model B) ------------------- 2

2C. Doorbell Camera(Model C) ------------------- 2

3. System Connection ------------------------- 4

4. 1 Doorbell and 4 Monitors Connection ------------ 5

5. 2 Doorbells and 3 Monitors Connection ----------- 6

6. Basic Video Door Phone Operation -------------- 7

7. Mute function ------------------------------ 8

8. Card and Service Button(Model C only) ----------- 8

9. Remote control(optional) ---------------------- 9

145~160 cm

The recommended installation heights for both

Monitor and Camera 145~160mm.

Direct wall mounting Mounting with 86 box

Mute button

Reserved

Mounting panel

Door/wall

Doorbell panel

Screw

Camera Lens

Open the name tag

Call Button

Night-view LED

Speaker

Microphone

Name Tag

1. Indoor Monitor

2A. Doorbell Camera(Model A)

-1-

Camera Lens

Call Button

Night-view LED

Speaker

Microphone

SPEAK

NOW

DOOR

SERVICE

OPEN

CALL

SPEAK

NOW

DOOR

SERVICE

OPEN

CALL

SPEAK

NOW

DOOR

SERVICE

OPEN

CALL

Camera Lens

Call Button

Service Button

plastic tag paper

Infrared LED

How to change name tag

Infrared Sensor

Speaker

Microphone

Door opeo LED

Speak Now LED

Card reader

&Name tag

2B. Doorbell Camera(Model B)

2C. Doorbell Camera(Model C)

-2-

How to adjust camera angle

Mounting on the wall

-3-

3. System Connection

CAT-5 or CAT5E cable can be used, the maximum distance from Doorbell

Camera to Monitor is 100 meters.(When over 100 meters, an extra power

supply needed to be connected to the Monitor)

●Note 1: Connect the power(+) to 8 pin and power(-) to 7 pin.

●Note 2: When there is only one Doorbell Camera and one Monitor installed, Keep the JP1

jumper; when multiple Doorbell or Monitor install, remove the JP1 jumper.

●Note 3: When connect a Normally-Open lock(Power-to-open lock), as show in the picture,

connect to the COM and NO pin; when connect a Normally-Close lock(Power-off-to-open lock),

connect to the COM and NC pin.

●Note 4: The power supply for the lock is not included in the product, please use appropriate

power supply.

●Note 5: Unlock time jumper. Can be set to 1 second or 5 seconds.

●Note 6: Function reserved.

Camera

Exit Button

Monitor

Power

Supply

Cat-5 Cable

1 ~ 8

OFF

Brown

Brown/white

Blue

Blue/white

Green

Green/white

Orange

Orange/white

JP1

Note 4

Note 1

Note 2

Note 5

Note 6

Note 3

1 2 3 4 5 6 7 8

GS INDOOR GND NO NC COM out

+12V

Power supply

12345678

8. Brown

7. Brown/white

6. Green

5. Blue/white

4. Blue

3. Green/white

2. Orange

1. Orange/white

12345678

-4-

4. 1 Doorbell and 4 Monitors Connection

Doorbell

Camera

Doorbell Camera

Power

Supply

Distributor 4110S

Power

Supply 1# Monitor

1# Monitor

2# Monitor

3# Monitor

4# Monitor

Brown

PORT4

DC+

GND

AF+

AF-

VF+

VF-

PORT3

PORT2

PORT1

Brown/white

Blue

Blue/white

Green

Green/white

Orange

Orange/white

JP1

1 2 3 4 5 6 7 8

GS INDOOR GND NO NC COM out

+12V

-5-

5. 2 Doorbells and 3 Monitors Connection

2# Doorbell

1# Doorbell

Power

Supply

Distributor 4230

Power

Supply 3# Monitor 2# Monitor

1# Monitor

3# Monitor 2# Monitor

CH3+

CH3-

CH2+

CH2-

CH1+

CH1-

CH3+

CH3-

CH2+

CH2-

CH1+

CH1-

GND

DC+

PORT3

PORT2

Down link

PORT1

doorbell 1

doorbell 2

JP1

1 2 3 4 5 6 7 8

JP1

1 2 3 4 5 6 7 8

12345678

8. Brown

7. Brown/white

6. Blue

5. Blue/white

4. Green

3. Green/white

2. Orange

1. Orange/white

12345678

Up linkPower

-6-

1. When visitor presses the Call Button on the Outdoor Station, the

monitor rings, at the same time, the screen displays the visitor image,

and MESG LED turns to red.

2. Press Button to talk to the visitor(If there is

no anwer, the system will automatically reset

to standby state after 60 seconds); Press

Button again to end the conversation(or the

conversation will be cut off automatically after

120 seconds).

TALK Button

Unlock Button

Monitor Button

3. During ringing or talking, press Button to

unlock the door. (A Di~ sound will prompt to

indicate the door is opened)

4. In standby, press Button to monitor

outside. If two doorbells were installed, press

Button shows view of Doorbell 1, press

to end; press one more time to view

Doorbell 2. (Monitoring time is limited to 60

seconds)

6. Basic Video Door Phone Operation

-7-

Table of contents

Other Intelligent Home Intercom System manuals

Intelligent Home

Intelligent Home IH-6912 Slave User manual

Intelligent Home

Intelligent Home IH-692 Slave User manual

Intelligent Home

Intelligent Home IH691 User manual

Intelligent Home

Intelligent Home LEDA User manual

Intelligent Home

Intelligent Home IH-6912 Slave User manual

Intelligent Home

Intelligent Home IH692SD User manual

Intelligent Home

Intelligent Home Cronus User manual

Intelligent Home

Intelligent Home MR9L User manual

Intelligent Home

Intelligent Home Cronus 4-wire User manual

Intelligent Home

Intelligent Home NTI700 User manual

Intelligent Home

Intelligent Home Alecto User manual

Intelligent Home

Intelligent Home Cat-5 network cable User manual

Intelligent Home

Intelligent Home IH6913 User manual

Intelligent Home

Intelligent Home DX-471 User manual

Intelligent Home

Intelligent Home Thor User manual

Intelligent Home

Intelligent Home CAT-5 Series User manual

Intelligent Home

Intelligent Home 692SD User manual

Intelligent Home

Intelligent Home CAT-5 Series User manual

Intelligent Home

Intelligent Home MR7D User manual

Intelligent Home

Intelligent Home 7Avro610C User manual

Intelligent Home

Intelligent Home DT6913SD User manual

Intelligent Home

Intelligent Home Alecto User manual

Intelligent Home

Intelligent Home DT591 User manual

Intelligent Home

Intelligent Home DT-ENG-692SD-V2 User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual