Intelix DIGI-88FS Operating instructions

8001 Terrace Ave
Suite 201
Middleton, WI 53562
Rev 141006 Phone: 608-831-0880
Toll-Free: 866-462-8649
Fax: 608-831-1833
DIGI-88FS Installaon and
Operaon Guide


DIGI-88FS Installaon Guide
3
Important Safety Instrucons
Read all of these instrucons. Save them for future reference.
»Follow all warnings and instrucons marked on the device.
»This product is for indoor use only.
»Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.
»Do not use the device near water.
»Do not place the device near, or over, radiators or heat registers.
»The device cabinet is provided with slots and openings to allow for adequate venlaon. To ensure reliable operaon, and to protect
against overheang, these openings must never be blocked or covered.
»The device should never be placed on a so surface (bed, sofa, rug, etc.) as this will block its venlaon openings. Likewise, the device
should not be placed in a built in enclosure unless adequate venlaon has been provided.
»Never spill liquid of any kind on the device.
»Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
»The device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
»To prevent damage to your installaon it is important that all devices are properly grounded.
»Clean only with a dry cloth.
»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
»Use only accessories specied or recommended by Intelix.
»Explanaon of graphical symbols:
◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle symbol is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure which may be of
sucient magnitude to constute a risk of shock to a person or persons.
◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended to alert the user
to the presence of important operang and maintenance (servicing) instrucons in the literature accompanying
the product.
»Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or
tripped over. If an extension cord is used with this device make sure that the total of the ampere rangs of all products used on this
cord does not exceed the extension cord ampere rang. Make sure that the total of all products plugged into the wall outlet does not
exceed 15 amperes.
»To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line
condioner, or uninterrupble power supply (UPS).
»Posion system cables and power cables carefully; be sure that nothing rests on any cables.
»Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulng in a
risk of re or electrical shock.
»Do not aempt to service the device yourself. Refer all servicing to qualied service personnel.
»If the following condions occur, unplug the device from the wall outlet and bring it to qualied service personnel for repair.
◊ The power cord or plug has become damaged or frayed.
◊ Liquid has been spilled into the device.
◊ The device has been exposed to rain or water.
◊ The device has been dropped, or the cabinet has been damaged.
◊ The device exhibits a disnct change in performance, indicang a need for service.
◊ The device does not operate normally when the operang instrucons are followed.
»Only adjust those controls that are covered in the operang instrucons. Improper adjustment of other controls may result in
damage that will require extensive work by a qualied technician to repair.
»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a cart is used, use
cauon when moving the cart/equipment combinaon to avoid injury from p-over.
»Unplug this apparatus during lightning storms or when unused for long periods of me.

DIGI-88FS Installaon Guide
4
Table of Contents
Product Overview��������������������������������������������������������������������������������������������������������������������������������������������� 6
Package Contents ��������������������������������������������������������������������������������������������������������������������������������������������� 7
Front and Rear Panels��������������������������������������������������������������������������������������������������������������������������������������� 8
Front Panel���������������������������������������������������������������������������������������������������������������������������������������������������������� 8
Rear Panel����������������������������������������������������������������������������������������������������������������������������������������������������������� 8
IR Remote��������������������������������������������������������������������������������������������������������������������������������������������������������� 9
Installaon Instrucons ���������������������������������������������������������������������������������������������������������������������������������� 10
Quick Start ��������������������������������������������������������������������������������������������������������������������������������������������������������10
Rack mount the Matrix �������������������������������������������������������������������������������������������������������������������������������������10
Connect Ground ������������������������������������������������������������������������������������������������������������������������������������������������10
Connect Sources������������������������������������������������������������������������������������������������������������������������������������������������11
Connect Displays�����������������������������������������������������������������������������������������������������������������������������������������������11
Connect Control ������������������������������������������������������������������������������������������������������������������������������������������������11
IR Control ....................................................................................................................................................11
RS232 Control .............................................................................................................................................12
TCP/IP (Telnet) Control ...............................................................................................................................12
Router Connecon .....................................................................................................................................13
Crossover Cable Connecon .......................................................................................................................13
Web Browser Control .................................................................................................................................13
Apply Power ������������������������������������������������������������������������������������������������������������������������������������������������������14
Front Panel Operaon ������������������������������������������������������������������������������������������������������������������������������������ 15
Unlock the Front Panel��������������������������������������������������������������������������������������������������������������������������������������15
Basic Roung ����������������������������������������������������������������������������������������������������������������������������������������������������15
Advanced Roung ���������������������������������������������������������������������������������������������������������������������������������������������15
Front Panel Menu����������������������������������������������������������������������������������������������������������������������������������������������16
IP Seng.....................................................................................................................................................16
Serial Port Seng .......................................................................................................................................16
Operaon Mode .........................................................................................................................................16
EDID Mode ����������������������������������������������������������������������������������������������������������������������������������������������� 16
CEC ����������������������������������������������������������������������������������������������������������������������������������������������������������� 16
OSD����������������������������������������������������������������������������������������������������������������������������������������������������������� 17
Output Status������������������������������������������������������������������������������������������������������������������������������������������� 17
Security Mode ............................................................................................................................................17
Save to a Prole ..........................................................................................................................................17
IR Remote Operaon �������������������������������������������������������������������������������������������������������������������������������������� 18
Web GUI��������������������������������������������������������������������������������������������������������������������������������������������������������� 19
GUI Menu����������������������������������������������������������������������������������������������������������������������������������������������������������19
Connecon Sub-Menu���������������������������������������������������������������������������������������������������������������������������������������19
Status ..........................................................................................................................................................19
Output Audio Adjust ...................................................................................................................................19

DIGI-88FS Installaon Guide
5
Setup Sub-Menu������������������������������������������������������������������������������������������������������������������������������������������������20
Web ............................................................................................................................................................ 20
System ........................................................................................................................................................ 20
Port Name ..................................................................................................................................................20
EDID Mode Seng .....................................................................................................................................20
Customized Video Data���������������������������������������������������������������������������������������������������������������������������� 21
Customized Audio Data���������������������������������������������������������������������������������������������������������������������������� 21
Video Processing Mode ..............................................................................................................................21
System Sub-Menu ���������������������������������������������������������������������������������������������������������������������������������������������21
Prole Sub-Menu ����������������������������������������������������������������������������������������������������������������������������������������������22
Selecon ..................................................................................................................................................... 22
Name ..........................................................................................................................................................22
User Mgmt Sub-Menu���������������������������������������������������������������������������������������������������������������������������������������22
Add User .....................................................................................................................................................22
Edit User .....................................................................................................................................................22
RS232 Commands������������������������������������������������������������������������������������������������������������������������������������������� 23
Roung Commands�������������������������������������������������������������������������������������������������������������������������������������������23
AV Mung Commands ��������������������������������������������������������������������������������������������������������������������������������������23
Get AV Status ����������������������������������������������������������������������������������������������������������������������������������������������������24
EDID Sengs�����������������������������������������������������������������������������������������������������������������������������������������������������24
Proles ��������������������������������������������������������������������������������������������������������������������������������������������������������������24
Power On Detecon ������������������������������������������������������������������������������������������������������������������������������������������ 25
On-Screen Display ���������������������������������������������������������������������������������������������������������������������������������������������25
CEC �������������������������������������������������������������������������������������������������������������������������������������������������������������������� 25
Baud Rate Sengs��������������������������������������������������������������������������������������������������������������������������������������������26
Reset to Factory Defaults ����������������������������������������������������������������������������������������������������������������������������������26
Telnet Commands������������������������������������������������������������������������������������������������������������������������������������������� 27
Connecng to the DIGI-88FS �����������������������������������������������������������������������������������������������������������������������������27
Help, Command List ������������������������������������������������������������������������������������������������������������������������������������������28
Troubleshoong ��������������������������������������������������������������������������������������������������������������������������������������������� 29
Matrix does not power on���������������������������������������������������������������������������������������������������������������������������������29
Image looks “fuzzy” ������������������������������������������������������������������������������������������������������������������������������������������29
Image looks “squashed” or “stretched” ������������������������������������������������������������������������������������������������������������29
Cannot control via RS232����������������������������������������������������������������������������������������������������������������������������������29
Technical Specicaons ���������������������������������������������������������������������������������������������������������������������������������� 30

DIGI-88FS Installaon Guide
6
The Intelix DIGI-88FS eight input by eight output HDMI matrix is designed to add fast switching and scaling to
enhance the user experience in professional installaons.
The new DIGI-88FS features eight HDMI inputs and eight scaling HDMI outputs with support for resoluons up to
1920x1200. Regardless of the source video resoluon, the display will always receive the ideal video resoluon.
Gone are the days of not being able to view 1080p content on a WXGA or 720p display.
In addion to the fast switching and scaling capabilies of the matrix, the DIGI-88FS can also be congured to
automacally advance to the next HDMI input if the current video source is powered o.
The DIGI-88FS can be controlled via the front panel, infrared (IR), RS232, or via a web GUI when connected to an
internal network. The extensive variety of control opons makes the DIGI-88FS an easily accessible matrix for any
control system.
The DIGI-88FS takes up only one rack unit, saving valuable real estate in an equipment rack. The 62-wa internal
power supply with an industry standard IEC power input in the DIGI-88FS eliminates the need for tradional “wall
wart” or inline power supplies.
Product Overview

DIGI-88FS Installaon Guide
7
Package Contents
Shelf Feet with Screws
(installed on matrix)
4 ea
DIGI-88FS Installaon
and Operaon Guide
1 ea
DIGI-88FS Matrix Switcher
1 ea
Rack Ears with Screws
2 ea
IR receiver (eye)
1 ea
US Power Cable
1 ea
Infrared Remote Control
1 ea
Please verify the following items are in the shipping box prior to installaon of the DIGI-88FS.

DIGI-88FS Installaon Guide
8
Front and Rear Panels
Front Panel
Rear Panel
1 2 3 4
5 6 7
A CB D FE
HG
1. LCD screen
2. Input select buons
3. MENU buon
4. CANCEL buon
5. Output select buons
6. PROFILE buon
7. ENTER buon
A. AC power input
B. Power switch
C. Ground screw
D. HDMI outputs
E. IR input for matrix
F. TCP/IP (Telnet) control input; also allows control via web browser
G. HDMI inputs
H. RS232 control input

DIGI-88FS Installaon Guide
9
IR Remote
The included IR remote performs AV roung and power on/o funcons. Please see page 18 (IR Remote
Operaon) for informaon on controlling the matrix from the IR remote.
The remote control requires one CR2025, which is included and installed for convenience. A clear plasc tab
prevents the baery from being drained during shipment and must be removed prior to operaon.

DIGI-88FS Installaon Guide
10
Installaon Instrucons
Quick Start
Rack mount the Matrix
1. Rack mount the matrix (oponal)
2. Connect ground (oponal)
3. Connect sources
4. Connect displays
5. Connect control (oponal)
6. Apply power
At least 2 inches of free air space is required on both sides of the DIGI-88FS for proper side venlaon. Avoid
mounng the DIGI-88FS near a power amplier or any other source of signicant heat.
Remove the supplied shelf feet from the boom of the matrix.
Then, remove the screw that secures the front panel to the side of
the matrix chassis.
Aach the supplied rack ears to the sides of the DIGI-88FS matrix.
The matrix requires one rack units (1 RU) of space. It is recommended
that you leave an empty rack space above and below the DIGI-88FS
for addional cooling.
Connect Ground
A ground screw is located on the le rear of the matrix to help eliminate stac shock during installaon and
operaon of the matrix. Connect a wire from the matrix to an earth ground, such as a grounded bus bar in an
equipment rack.
Table of contents
Other Intelix Amplifier manuals

Intelix
Intelix HDDA-8-F User manual

Intelix
Intelix HDMI-2X2 User manual

Intelix
Intelix DIGI-HD-1X8 User manual

Intelix
Intelix VGADA-2 User manual

Intelix
Intelix HD14S User manual

Intelix
Intelix INT-1X4B-1H User manual

Intelix
Intelix AUDISEY Athena User manual

Intelix
Intelix AUD-220 User manual

Intelix
Intelix DIGI-1X4B-1H Operating instructions

Intelix
Intelix HDMI-2X8 User manual


















