Intel NUC 11 Pro Kit NUC11TNHi3 User manual

NUC11TNH

User Guide –January 2021

Intel® NUC 11 Pro Kit NUC11TNHi3

Intel® NUC 11 Pro Kit NUC11TNHi5

Intel® NUC 11 Pro Kit NUC11TNHv5

Intel® NUC 11 Pro Kit NUC11TNHi7

Intel® NUC 11 Pro Kit NUC11TNHv7

Intel® NUC 11 Pro Kit NUC11TNHi30L

Intel® NUC 11 Pro Kit NUC11TNHi50L

Intel® NUC 11 Pro Kit NUC11TNHv50L

Intel® NUC 11 Pro Kit NUC11TNHi70L

Intel® NUC 11 Pro Kit NUC11TNHv70L

User Guide

January 2021

NUC11TNH

User Guide –January 2021

You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products

described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject

matter disclosed herein.

No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.

All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product

specifications and roadmaps.

The products described may contain design defects or errors known as errata which may cause the product to deviate from published

specifications. Current characterized errata are available on request.

Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by

visiting: http://www.intel.com/design/literature.htm.

Intel technologies' features and benefits depend on system configuration and may require enabled hardware, software or service activation.

Performance varies depending on system configuration. No computer system can be absolutely secure.

Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others.

 
 
 

NUC11TNH 
User Guide –January 2021 
Contents 
0 Introduction .............................................................................................................................5 
1 Before You Begin ...........................................................................................................................................5 
2 Installation Precautions.............................................................................................................................6 
3 Observe Safety and Regulatory Requirements.........................................................................6 
0 Open the Chassis ...................................................................................................................7 
0 Install and Remove System Memory .........................................................................8 
1 Install SO-DIMMs...........................................................................................................................................8 
2 Remove SO-DIMMs ......................................................................................................................................9 
0 Install an M.2 SSD...............................................................................................................10 
0 Install a 2.5-inch SSD or Hard Drive........................................................................12 
0 Close the Chassis.................................................................................................................14 
0 Use the VESA Bracket (Optional)...............................................................................15 
0 Connect Power ......................................................................................................................17 
0 Install an Operating System .........................................................................................18 
0 Install the Latest Device Drivers and Software ................................................19 
 
 
 

NUC11TNH

User Guide –January 2021

Revision History

Date

Revision

Description

January 2021

1.0

Initial release.

NUC11TNH

User Guide –January 2021

1.0 Introduction

This User Guide provides step-by-step installation instructions for these products:

•Intel® NUC 11 Pro Kit NUC11TNHi3

•Intel® NUC 11 Pro Kit NUC11TNHi5

•Intel® NUC 11 Pro Kit NUC11TNHv5

•Intel® NUC 11 Pro Kit NUC11TNHi7

•Intel® NUC 11 Pro Kit NUC11TNHv7

•Intel® NUC 11 Pro Kit NUC11TNHi30L

•Intel® NUC 11 Pro Kit NUC11TNHi50L

•Intel® NUC 11 Pro Kit NUC11TNHv50L

•Intel® NUC 11 Pro Kit NUC11TNHi70L

•Intel® NUC 11 Pro Kit NUC11TNHv70L

1.1 Before You Begin

CAUTIONS

The steps in this guide assume you’re familiar with computer terminology and

with the safety practices and regulatory compliance required for using and

modifying computer equipment.

Disconnect the computer from its power source and from any network before

performing any of the steps described in this guide.

Failure to disconnect power, telecommunications links, or networks before you open

the computer or perform any procedures can result in personal injury or equipment

damage. Some circuitry on the board can continue to operate even though the front

panel power button is off.

Follow these guidelines before you begin:

•Always follow the steps in each procedure in the correct order.

•Create a log to record information about your computer, such as model,

serial numbers, installed options, and configuration information.

•Electrostatic discharge (ESD) can damage components. Perform the

procedures described in this chapter only at an ESD workstation using an

antistatic wrist strap and a conductive foam pad. If such a station isn’t

available, you can provide some ESD protection by wearing an antistatic wrist

NUC11TNH

User Guide –January 2021

strap and attaching it to a metal part of the computer chassis.

1.2 Installation Precautions

When you install and test the Intel NUC, observe all warnings and cautions in the

installation instructions.

To avoid injury, be careful of:

•Sharp pins on connectors

•Sharp pins on circuit boards

•Rough edges and sharp corners on the chassis

•Hot components (such as SSDs, processors, voltage regulators, and heat sinks)

•Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing

to qualified technical personnel.

1.3 Observe Safety and Regulatory Requirements

If you don’t follow these instructions, you increase your safety risk and the possibility

of noncompliance with regional laws and regulations.

NUC11TNH

User Guide –January 2021

2.0 Open the Chassis

Unscrew the four corner screws on the bottom of the chassis and lift the cover.

NUC11TNH

User Guide –January 2021

3.0 Install and Remove System Memory

Intel NUC 11 Pro Kit NUC11TNH have two 260-pin DDR4 SO-DIMM memory slots

Memory requirements:

•1.2V low voltage memory

•2133/2400/3200 MHz SO-DIMMs

•Non-ECC

Find compatible system memory modules at the Intel® Product Compatibility Tool:

•Intel® NUC 11 Pro Kit NUC11TNHi3

•Intel® NUC 11 Pro Kit NUC11TNHi5

•Intel® NUC 11 Pro Kit NUC11TNHv5

•Intel® NUC 11 Pro Kit NUC11TNHi7

•Intel® NUC 11 Pro Kit NUC11TNHv7

•Intel® NUC 11 Pro Kit NUC11TNHi30L

•Intel® NUC 11 Pro Kit NUC11TNHi50L

•Intel® NUC 11 Pro Kit NUC11TNHv50L

•Intel® NUC 11 Pro Kit NUC11TNHi70L

•Intel® NUC 11 Pro Kit NUC11TNHv70L

3.1 Install SO-DIMMs

If you plan to install just one SO-DIMM, install it in the lower memory socket.

To install the SO-DIMMs, follow these steps:

1. Observe the precautions in "Before You Begin" in Section 1.1.

2. Turn off all peripheral devices connected to the computer. Turn off the

computer and disconnect the AC power cord.

3. Align the small notch at the bottom edge of the SO-DIMM with the key in

the socket.

NUC11TNH

User Guide –January 2021

4. Insert the bottom edge of the SO-DIMM into the socket.

5. When the SO-DIMM is inserted, push down on the outer edge of the

SO-DIMM until the retaining clips snap into place. Make sure the clips

are firmly in place.

3.2 Remove SO-DIMMs

To remove a SO-DIMM, follow these steps:

1. Observe the precautions in "Before You Begin" in Section 1.1.

2. Turn off all peripheral devices connected to the computer. Turn off the

computer.

3. Remove the AC power cord from the computer.

4. Remove the computer’s cover.

5. Gently spread the retaining clips at each end of the SO-DIMM socket. The

SO-DIMM pops out of the socket.

6. Hold the SO-DIMM by the edges, lift it away from the socket, and

store it in an anti-static package.

7. Reinstall and reconnect any parts you removed or disconnected to reach the

SO-DIMM sockets.

8. Replace the computer’s cover and reconnect the AC power cord.

NUC11TNH

User Guide –January 2021

4.0 Install an M.2 SSD

Intel® NUC 11 Pro Kit NUC11TN support 80mm and 42mm SSDs.

Find compatible M.2 SSDs at the Intel® Product Compatibility Tool:

•Intel® NUC 11 Pro Kit NUC11TNHi3

•Intel® NUC 11 Pro Kit NUC11TNHi5

•Intel® NUC 11 Pro Kit NUC11TNHv5

•Intel® NUC 11 Pro Kit NUC11TNHi7

•Intel® NUC 11 Pro Kit NUC11TNHv7

•Intel® NUC 11 Pro Kit NUC11TNHi30L

•Intel® NUC 11 Pro Kit NUC11TNHi50L

•Intel® NUC 11 Pro Kit NUC11TNHv50L

•Intel® NUC 11 Pro Kit NUC11TNHi70L

•Intel® NUC 11 Pro Kit NUC11TNHv70L

If you’re installing an 80mm M.2 SSD:

1. Remove the small silver screw from the 80mm metal standoff on the

motherboard (A).

2. Align the small notch at the bottom edge of the M.2 card with the key in the

connector.

3. Insert the bottom edge of the M.2 card into the connector (B).

4. Secure the card to the standoff with the small silver screw (C).

If you’re installing a 42mm M.2 SSD:

1. Remove the small silver screw from the metal standoff on the motherboard (A).

This manual suits for next models

Table of contents

Other Intel Computer Hardware manuals

Intel

Intel Core i7 Extreme Edition User manual

Intel

Intel PXA270 User manual

Intel

Intel ATX 3.0 Guide

Intel

Intel NetStructure ZT 5085 12U User manual

Intel

Intel Core i3 Desktop Series User manual

Intel

Intel 80960KB User manual

Intel

Intel Xeon Processor E5-2600 User manual

Intel

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES... User manual

Intel

Intel UPI- 41A User manual

Intel

Intel GDT6113RS User manual

Intel

Intel NUC6i7KYK User manual

Intel

Intel RES2SV240 Installation manual

Intel

Intel I7-900 DESKTOP PROCESSOR - VOLUME 1 User manual

Intel

Intel RH80536GC0332M - Pentium M 1.8 GHz Processor User manual

Intel

Intel P965 User manual

Intel

Intel X3350 - Xeon 2.66 Ghz 12M L2 Cache 1333MHz FSB LGA775 Quad-Core... User manual

Intel

Intel 80219 Technical manual

Intel

Intel 87C196CA User manual

Intel

Intel BX80605X3430 - Xeon 2.4 GHz Processor User manual

Intel

Intel DZ87KLT-75K Quick setup guide

Intel

Intel BX80623I52500K User manual

Intel

Intel NUC7i3BNH User manual

Intel

Intel RMS3CC080 User manual

Intel

Intel Braswell Series User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual

Advantech

Advantech ASMB-935 Series user manual

Jupiter

Jupiter RAM PACK instructions