Intel Motherboard Raptor AT User manual

Raptor A

Motherboard

Installation Guide

Introduction

Table of Contents

Notice...................................................... IV

Introduction .......................................... V

Chapter 1 Pre-Configuration......1

Step 1 Setting the Jumpers 3

Jumper Locations ............................................................. 4

CMOS Reset....................................................................... 5

Disk-on-Chip Selection..................................................... 5

Flash BIOS Write Protect ................................................. 5

Clock Speed Selection ..................................................... 6

Watchdog Timer Selection............................................... 6

On-board Ethernet ............................................................ 7

ATX Power Supply Enhancements ................................. 7

Step 2 DRAM, CPU, Disk-on-Chip and

Cables Installation 8

Raptor AT Memory Configuration ................................... 8

CPU Installation ................................................................ 8

Disk-on-Chip installation................................................ 10

Installing Cables ............................................................. 10

Power and Control Panel Cables................................... 10

Installing Peripheral Cables........................................... 10

Index of Connectors ....................................................... 13

Chapter 2 HIFLEX BIOS

Setup............................15

Standard Setup ............................................................... 16

Advanced CMOS Setup .................................................. 17

Advanced Chipset Setup................................................ 21

Power Management Setup ............................................. 25

PCI/Plug and Play Setup ................................................ 28

Peripheral Setup ............................................................. 31

Auto Detect Hard Disk .................................................... 34

Raptor AT – Installation Guide

Change User Password.................................................. 34

Change Supervisor Password....................................... 35

Change Language Settings............................................ 35

Auto Configuration with Optimal Settings ................... 35

Auto Configuration with Fail-Safe Settings.................. 36

Save Settings and Exit ................................................... 36

Exit without Saving......................................................... 36

Chapter 3 Upgrading....................37

Upgrading the System Memory..................................... 37

Upgrading the Microprocessor...................................... 37

Appendix A Technical

Specifications..........39

Chipsets ........................................................................... 39

System Memory .............................................................. 39

Bios .................................................................................. 39

Embedded I/O .................................................................. 40

Industrial Devices ........................................................... 41

Miscellaneous ................................................................. 41

Memory Map .................................................................... 43

DMA Channels................................................................. 43

I/O Map ............................................................................. 44

On-board Devices ........................................................... 45

PCI Configuration Space Map........................................ 45

Interrupts ......................................................................... 46

PCI Interrupt Routing Map ............................................. 46

SMBUS ............................................................................. 47

Connectors Pin-out......................................................... 47

Appendix B Flash BIOS

programming ...........51

Appendix C Disk-On-Chip .........53

Introduction

III

Appendix D On-Board Industrial

Devices .......................55

Watchdog Timer.............................................................. 55

Post Code Display .......................................................... 56

Appendix E On-Board

Ethernet .................67

Raptor AT – Installation Guide

Notice

The company reserves the right to revise this publication or to change

its contents without notice. Information contained herein is for

reference only and does not constitute a commitment on the part of the

manufacturer or any subsequent vendor. They are in no way

responsible for any loss or damage resulting from the use (or misuse) of

this publication.

This publication and any accompanying software may not, in whole or

in part, be copied, photocopied, translated or reduced to any machine

readable form without prior consent from the vendor, manufacturer or

creators of this publication, except for copies kept by the user for

backup purposes.

Brand and product names mentioned in this publication may or may not

be copyrights and/or registered trademarks of their respective

companies. They are mentioned for identification purposes only and are

not intended as an endorsement of that product or its manufacturer.

Third Edition.

August, 2001

Introduction

Thank you for your purchase of the Raptor AT industrial embedded

motherboard. The Raptor AT design was based on the Intel 440BX

chipset providing the ideal platform to industrial applications. The

Raptor AT design is based on the Intel Celeron and PIII processor.

With proper installation and maintenance, your Raptor AT will provide

years of high performance and trouble free operation.

This manual provides a detailed explanation into the installation and

use of the Raptor AT industrial embedded motherboard. This manual

is written for the novice PC user/installer. However, as with any major

computer component installation, previous experience is helpful and

should you not have prior experience, it would be prudent to have

someone assist you in the installation. This manual is broken down into

3 chapters and 5 appendixes.

Chapter 1 - System Board Pre-Configuration

This chapter provides all the necessary information for

installing the Raptor AT. Topics discussed include: installing

the CPU (if necessary), DRAM installation, jumper settings

for CPU and standard I/O. Connecting all the cables from the

system board to the chassis and peripherals.

Chapter 2 - BIOS Configuration

This chapter shows the final step in getting your system

firmware setup.

Chapter 3 - Upgrading

The Raptor AT provides a number of expansion options

including memory. All aspects of the upgrade possibilities are

covered.

Raptor AT – Installation Guide

Appendix A - Technical Specifications

A complete listing of all the major technical specifications of

the Raptor AT is provided.

Appendix B - Flash BIOS Programming (optional)

Provides all the information necessary to program your

optional AMIBIOS Flash BIOS.

Appendix C - Disk-on-Chip

Two on-board sockets for a solid state flash disk device.

Appendix D - Industrial Devices

Watchdog Timer and On-Board POST (Power On Self

Testing) code display.

Appendix E - Ethernet

On-board 10/100 Ethernet.

Static Electricity Warning!

The Raptor AT has been designed as rugged as possible but can still be

damaged if jarred sharply or struck. Handle the motherboard with care.

The Raptor AT also contains delicate electronic circuits that can be

damaged or weakened by static electricity. Before removing the Raptor

AT from its protective packaging, it is strongly recommended that you

use a grounding wrist strap. The grounding strap will safely discharge

any static electricity build up in your body and will avoid damaging the

motherboard. Do not walk across a carpet or linoleum floor with the

bare board in hand.

Introduction

VII

Warranty

This product is warranted against material and manufacturing defects

for two years from the date of delivery. Buyer agrees that if this

product proves defective the manufacturer is only obligated to repair,

replace or refund the purchase price of this product at manufacturer's

discretion. The warranty is void if the product has been subjected to

alteration, misuse or abuse; if any repairs have been attempted by

anyone other than the manufacturer; or if failure is caused by accident,

acts of God, or other causes beyond the manufacturer's control.

Raptor AT - An Overview

The Raptor AT represents the ultimate in industrial embedded

motherboard technology. No other system board available today

provides such impressive list of features:

CPU Support

• Supports full series of Intel Celeron and PIII PGA370

processors (up to 100MHz FSB).

Supported Bus Clocks

• 66 and 100MHz.

Memory

• Three DIMM sockets up to 384MB or 768MB(registered)

SDRAM, PC100 recommended (required for PIII or 100MHz).

On-Board I/O

• 2 Floppies up to 2.88 MB.

• Dual channel PCI 32-bit EIDE controller.

• Two high speed RS-232 serial ports 16 Bytes FIFO (16550).

• One Centronics™ compatible bidirectional parallel port.

EPP/ECP mode compatible.

Raptor AT – Installation Guide

VIII

• One PS/2 mouse header and one AT keyboard connector.

• Two Universal Serial Bus headers.

• Two Disk-on-Chip on-board sockets up to 288MB each with

FFS for diskless applications.

• Software and hardware programmable Watchdog Timer & on-

board POST Display Diagnostics.

• Four 16-bit ISA slots and four 32-bit PCI slots.

• Ethernet header.

• Power Button – advanced management support.

• Automatic CPU voltage & temperature monitoring device

(optional).

ROM BIOS

• AMI BIOS™ BIOS HIFLEX with optional FLASH ROM

On-Board Ethernet

• On-board 10/100 Ethernet.

Conventions Used in this Manual





Notes - Such as a brief discussion of memory types.

Important Information - such as static warnings, o

very important instructions.

When instructed to enter keyboard keystrokes, th

text will be noted by this graphic.

Table of contents

Other Intel Computer Hardware manuals

Intel

Intel 440GX Guide

Intel

Intel D5005 User manual

Intel

Intel Terasic FLIK User manual

Intel

Intel 486MIS User manual

Intel

Intel Xeon LGA2011-v3 User manual

Intel

Intel 7512 Instruction Manual

Intel

Intel 80C186EA User manual

Intel

Intel SRCSASJV - RAID Controller Installation manual

Intel

Intel PSB-701LF User manual

Intel

Intel RMSP3AD16OF Installation manual

Intel

Intel CORE 2 DUO PROCESSOR E8000 - Reference guide

Intel

Intel Pentium OverDrive User manual

Intel

Intel Xeon Guide

Intel

Intel 80386 User manual

Intel

Intel RS2BL080 - RAID Controller User manual

Intel

Intel 80286 User manual

Intel

Intel iSBC 432/100 Quick user guide

Intel

Intel CD1IV128MK User manual

Intel

Intel DH61BE Configuration guide

Intel

Intel EP80579 User manual

Intel

Intel G34920-002 User manual

Intel

Intel SRCS16 - RAID Controller Installation manual

Intel

Intel i7-800 User manual

Intel

Intel 460GX Instruction Manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual

Advantech

Advantech ASMB-935 Series user manual

Jupiter

Jupiter RAM PACK instructions