Configuration as DSL router
12. In Menu Help > Wizards: Select Startup Wizard
13. Select Internet access via DSL (refer to
inline help for WAN over Ethernet)
These data can be found in the contract
documents or can be requested from
the provider.
14. Select the access mode supported by
the provider and enter the appropriate
access data
15. Enter VLAN tag if required
16. Adjust VPI, VCI and Multiplex
according to the specifications of the
provider if required
17. Enter IP address of the local application
network
If the router is to be configured for the
icom Connectivity Suite - VPN
(https://connectivity.insys-icom.de),
select icom Connectivity Suite –VPN
under VPN connection and enter
Customer name and Device code (from
icom Connectivity Suite –VPN, “My
VPN Hub” tab). Then, the IP address in
the local network will be assigned by
the icom Connectivity Suite - VPN.
18. Click on
Execute wizard
The DSL LED flashes green during connection establishment; as soon as a connection
has been established (Showtime), it is illuminated green and blinks orange with data
transfer.
If the web interface of the router does not return upon executing the wizard, click on
“Reload” in the browser (or Ctrl+F5).
Configuration of access data
User name and password for web interface access of the existing user in the default
settings must be changed to prevent a manipulation of the configuration by
unauthorised persons.
19. Menu Administration > Users: Enter or change User name and Password and select
User group "Read/Write"
20. Store settings in profile with
Save setting
s and activate profile with
A typo during entering or forgetting the configured access data require a reset to
default settings to be able to access the router again.
