InstaRobo L1 User manual
L1 Robot Vacuum Cleaner User Manual
ENEN © 2021 InstaRobo. All rights reserved. www.instarobo.com
01 ENENEN © 2021 InstaRobo. All rights reserved. www.instarobo.com
www.instarobo.com
02 EN ENEN © 2021 InstaRobo. All rights reserved. www.instarobo.com
Safety Instructions
Product Description
Preparations
App Networking Modes
Function Description
Product Maintenance
Troubleshooting
Product Specifications
Safety Information
3
4
7
9
11
17
22
25
26
Contents
Safety Instructions
03 ENEN © 2021 InstaRobo. All rights reserved. www.instarobo.com
Precautions Warning
！
！
1. Only authorized technical personnel are allowed to disassemble the product. You are advised not to
disassemble the product by yourself.
2. Only the original power adapter can be used on the product. If you use a non-original power adapter, the
product may be damaged.
3. Do not touch the power cord, socket, charger, or power adapter with wet hands.
4. Do not get your body or dirt into the rollers of the product.
5. Do not move the product near cigarette butts, lighters, and other open flames.
6. Clean the product after sweeping is completed.
7. Do not bend the power cord excessively, or place heavy and sharp objects on the machine.
8. Do not use the product outdoors as it is an indoor home appliance.
9. Do not sit on the product.
10. Do not use the product in moist environments such as the bathroom.
11. Before using the product, remove all fragile items on the ground such as glass products and lamps and items
that may entangle the side brushes and suction channels such as power cords, paper, and curtains.
12. Do not place the product in a place where the product is prone to fall, such as on a table or chair.
13. Before use, carefully check whether the power adapter is properly connected to the socket. Otherwise, the
battery may be damaged.
14. During using, inform other members in the house to prevent stumbling.
15. Empty the dust box when it is full before using the product.
16. The optimal temperature for using the product is 0°C (32°F) to 40°C (104°F).
17. Do not use the product in high-temperature environments.
18. Remove the battery from the machine before scrapping it.
19. Ensure that the product is not powered on when you remove the battery.
20. Reclaim the abandoned battery.
21. Do not use the mopping function on the carpet.
1. Use only the original rechargeable battery and charging dock provided by the manufactur-
er. Do not use a battery that is not rechargeable. For more information about the battery
specifications, see the Product Specifications sheet.
2. Do not use the product in environments with open flames or fragile items.
3. Do not attach your hair, clothes, fingers, and other parts of the human body near to the
suction channels and running parts of the product.
4. Do not use the product on the wet ground or ground with water.
5. Do not use the product to absorb any objects such as stones and waste paper that may
block the suction channels of the product.
6. Do not use the product to absorb any flammable materials, such as gasoline and toner
used in printer. Do not use the product in areas with fragile items.
7. Do not use the product to absorb any burning items, such as cigarettes, matches, ashes,
and other items that may cause a fire.
8. Do not place items in suction channels. Do not use the product if the suction channels are
blocked. Regularly clean up the dust, lint, and hair in the suction channels to ensure smooth
air circulation in the suction channels.
9. Handle the power cord cautiously to avoid damage. Do not use the power cord to drag or
lift the product and its charging dock. Do not use the power cord as a handle. Do not clamp
the power cord in the door gap. Do not pull the power cord at sharp edges or corners. Do
not operate the product on the power cord, and keep the power cord away from heat
sources.
10. Do not use damaged charging dock.
11. Do not burn the product even if it is severely damaged, because the battery built in it may
cause explosion.
Before using this product, please carefully read the following safety instructions and follow all the general safety prevention
measures.
Any operation not conforming to this manual may cause damage to the product.
Keep this manual properly.
04 ENEN © 2021 InstaRobo. All rights reserved. www.instarobo.com
Main unit Charging dock Power adapter Brush
Dust box Water tank
Side brush x2 Instructions Manual
HEPA filter
Product Components and Accessories
EN
© 2021 InstaRobo. All rights reserved. www.instarobo.com 05 EN
Front view
* Press and hold the button for 3s to enter
the APP networking mode
* Press the button to start or pause charging
Cliff sensor
Wi-Fi button
Power button
Recharge button
Omnidirectional lens
Side brush
Driving wheel
Dust box
Laser sensor
* Press and hold the button for 3s to power
on or 6s to power off the product
* Press the button to start or pause cleaning Surface cover
Dust box button
Charging electrode
Omnidirectional wheel
Battery
Roller brush assembly
Main Unit Components and Buttons
EN © 2021 InstaRobo. All rights reserved. www.instarobo.com
06 EN
Filter cover
Dust box conductive shrapnel
Dust box side cover
HEPA filter
Primary filter
DC connector
Charging electrode
Signal indicator
Water inlet
Water tank main body
Mopping cloth
Dust Box, Water Tank, and Charging Dock
Dust box
Charging dockWater tank
EN
© 2021 InstaRobo. All rights reserved. www.instarobo.com 07 EN
Note
1.Before you use the product, clean up the wires and sundries
scattered on the ground and remove drop-prone, fragile, valuable,
and potentially dangerous items to avoid personal injuries or
property damages in case of being entangled,jammed, dragged,
or knocked down by the main unit.
2.Avoid using the product in wading areas.Other-
wise, the fan will be damaged,affecting the perfor-
mance of the machine.
Use Environment
EN
© 2021 InstaRobo. All rights reserved. www.instarobo.com
08 EN
[Remove the protective film][Remove the protective strip]
Before you use the main unit, remove the protective strip from the main unit and remove the protective film
from the charging dock.
Preparations for Unpacking
EN
Smart Life App
Tuya Smart
© 2021 InstaRobo. All rights reserved. www.instarobo.com 09 EN
Scan the QR code Scan the QR code
Before networking, scan the QR code below or search for
Tuya Smart in the App Store to download the app. Register
an account and log in to the Tuya Smart app. Before network
configuration, ensure that the Wi-Fi is a 2.4 GHz one.
Associate the Tuya Smart app on your mobile phone with the
robot vacuum cleaner according to the following steps.
1. Tap the plus sign (+) on the Tuya app, and then tap the
scan button to scan the QR code on the device (or in the
figure below) to add the robot vacuum cleaner.
2. Select your Wi-Fi, enter the password, and then tap Next.
3. Tap and hold the Wi-Fi connection button on the cleaning robot for 3s as
prompted by the app, and ensure that the Wi-Fi indicator is blinking slowly.
4. Tap Next, find the password-free hot spot starting with SmartLife-XXXX in the
Wi-Fi list, and tap Go to Connect.
5. After the connection is set up, the Tuya app shows the connection screen. You
can control the product after a connection success message is displayed.
App Networking Modes
Settings WLAN
WLAN
Unsecured Network
MY NETWORKS
OTHER NETWORKS
Table of contents
Other InstaRobo Vacuum Cleaner manuals
