INSBUD IB-INV-CSI User manual

POWER INVERTER

IB-INV-CSI; IB-INV-SSI

pure sinewave witch AC charger and MPPT

charge controller for photovoltaic systems

THIS PRODUCT HAS THE MARK

AND HAS BEEN MANUFACTURED IN ACCORDANCE WITH ISO 9001 STANDARD

INSBUD ul. Niepodległości 16a

32-300 Olkusz

Polska

+48 503 166 906

e-mail: [email protected]

The manufacturer promotes development policy. The right to make changes and

improvements to products and instructions without prior notice is reserved!

The contents of this manual - texts and graphics are the property of the manufacturer or its

subcontractors and are protected by law.

manual version: 1.0.0

rmware version: 1.0.0

IB-INV-CSI; IB-INV-SSI

1 General information ................................... 4

2 Scope of delivery ..................................... 4

3 Technical data ...................................... 5

4 Overview .......................................... 10

5 Possible congurations of batteries ......................... 15

6 Functional diagrams of charger/MPPT-solar charge controller ........ 16

7 Safety features ...................................... 19

8 Self error correction ................................... 21

9 Warranty terms and conditions ............................ 22

WWW.INSBUD.NET

1General information

The IB-INV-CSI; IB-INV-SSI inverter is

a technical device to invert DC voltage into

sinusoidal alternating voltage. DC voltage is

usually provided by a battery or powerwall.

The inverter inverts direct current (DC) into

alternating current (AC). 230V AC power

supply from the inverter allows to power the

devices regardless of the availability of the

domestic power supply (shore power).

With the integrated IUoU charger of the

inverter IB-INV-CSI series, there is the

possibility to recharge the discharged batte-

ries or powerwall.

The IB-INV-SSI series inverters, in ad-

dition to the integrated IUoU charger, are

equipped also with the MPTT charge con-

troller for photovoltaic systems.

ECO Mode: Only solar power is used to char-

ge the batteries. Only solar power is used to

supply the 230V consumers (inverter func-

tion witch MPPT-solar charge controller). If

solar power is not available, 230V consumers

are supplied from the battery (inverter func-

tion).

2Scope of delivery

1x Inverter

1x User Manual

WWW.INSBUD.NET

3Technical data

Model

Continuous

output

Battery

voltage

Idle current

consumption

AC charger

Dimensions

(LxWxH)

Weight

IB-INV-CSI-3-12V 300 W 12V DC 0,65 A 10 A 270x150x55 2,1

IB-INV-CSI-3-24V 300 W 24V DC 0,33 A 5 A 270x150x55 2,1

IB-INV-CSI-5-12V 500 W 12V DC 0,65 A 10 A 355x150x75 3,0

IB-INV-CSI-5-24V 500 W 24V DC 0,33 A 5 A 355x150x75 3,0

IB-INV-CSI-10-12V 1000 W 12V DC 0,65 A 10 A 430x150x75 3,7

IB-INV-CSI-10-24V 1000 W 24V DC 0,33 A 5 A 430x150x75 3,7

IB-INV-CSI-10-48V 1000 W 48V DC 0,17 A 5 A 430x150x75 3,7

IB-INV-CSI-15-12V 1500 W 12V DC 0,65 A 20 A 450x220x90 5,3

IB-INV-CSI-15-24V 1500 W 24V DC 0,33 A 10 A 450x220x90 5,3

IB-INV-CSI-15-48V 1500 W 48V DC 0,17 A 5 A 450x220x90 5,3

IB-INV-CSI-20-12V 2000 W 12V DC 0,98 A 20 A 480x220x90 6,5

IB-INV-CSI-20-24V 2000 W 24V DC 0,50 A 10 A 480x220x90 6,5

IB-INV-CSI-20-48V 2000 W 48V DC 0,25 A 5 A 480x220x90 6,5

IB-INV-CSI-25-12V 2500 W 12V DC 1,0 A 20 A 530x220x90 7,3

IB-INV-CSI-25-24V 2500 W 24V DC 0,50 A 10 A 530x220x90 7,3

IB-INV-CSI-25-48V 2500 W 48V DC 0,25 A 5 A 530x220x90 7,3

IB-INV-CSI-30-12V 3000 W 12V DC 1,2 A 20 A 480x220x150 9,5

IB-INV-CSI-30-24V 3000 W 24V DC 0,60 A 10 A 480x220x150 9,5

IB-INV-CSI-30-48V 3000 W 48V DC 0,30 A 5 A 480x220x150 9,5

IB-INV-CSI-40-12V 4000 W 12V DC 1,2 A 20 A 480x220x150 11,5

IB-INV-CSI-40-24V 4000 W 24V DC 0,6 A 10 A 480x220x150 11,5

IB-INV-CSI-40-48V 4000 W 48V DC 0,30 A 5 A 480x220x150 11,5

IB-INV-SSI-10-12V 1000 W 12V DC 0,5 A 20 A 380x220x150 5,5

IB-INV-SSI-10-24V 1000 W 24V DC 0,25 A 10 A 380x220x150 5,5

IB-INV-SSI-10-48V 1000 W 48V DC 0,13 A 5 A 380x220x150 5,5

IB-INV-SSI-15-12V 1500 W 12V DC 0,5 A 20 A 450x220x150 6,5

IB-INV-SSI-15-24V 1500 W 24V DC 0,25 A 10 A 450x220x150 6,5

IB-INV-SSI-15-48V 1500 W 48V DC 0,13 A 5 A 450x220x150 6,5

IB-INV-SSI-20-12V 2000 W 12V DC 0,65 A 20 A 500x220x150 8,5

IB-INV-SSI-20-24V 2000 W 24V DC 0,32 A 10 A 500x220x150 8,5

IB-INV-SSI-20-48V 2000 W 48V DC 0,16 A 5 A 500x220x150 8,5

IB-INV-SSI-25-12V 2500 W 12V DC 1,0 A 20 A 520x220x150 9,0

IB-INV-SSI-25-24V 2500 W 24V DC 0,5 A 10 A 520x220x150 9,0

IB-INV-SSI-25-48V 2500 W 48V DC 0,25 A 5 A 520x220x150 9,0

IB-INV-SSI-30-12V 3000 W 12V DC 1,2 A 20 A 500x220x150 10,5

IB-INV-SSI-30-24V 3000 W 24V DC 0,6 A 10 A 500x220x150 10,5

IB-INV-SSI-30-48V 3000 W 48V DC 0,30 A 5 A 500x220x150 10,5

WWW.INSBUD.NET

Surge power proportional to the continuous

output

120% – 150% for 10 seconds

150% – 200% for 2 seconds

Switching time UPS <16 ms

output AC voltage 230V

AC voltage uctuation: max. 10%

Frequency: 50 Hz ± 1Hz

Waveform Pure sine wave (THD < 4%) at rated input

voltage

Battery types Wet, AGM, GEL, LiFePO4(only with BMS)

Operating temperature −15 ÷40◦C

Storage temperature −40 ÷85◦C

Relative humidity 20% ÷90%

Eciency range (The eciencies depend on

the type of consumer devices and load. For

example, the inverter typically has the highest

eciency at a load of approx. 70%.)

12V: 86% – 92%

24V: 87% - 93%

48V: 88% - 94%

Operating performance MPPT-charge controller (IB-INV-SSI)

Battery voltage 12V 24V 48V

Charge eciency > 97% > 97% > 97%

Solar input voltage 15 - 70V > 24 - 70V > 48 - 70V

Max. output current 20 A 20 A 20 A

WWW.INSBUD.NET

Recommended battery cables and battery capacity:

Model

Number of sets

Recommended

thickness at

100cm

Recommended

thickness at

150cm

Recommended

thickness at

200cm

Recommended

thickness at

200cm

Battery capacity

(Wet, Gel,

AGM)

Battery capacity

(LiFePO4)

3-12V 1 4 mm26 mm210 mm216 mm2≥50Ah ≥25Ah

3-24V 1 2.5 mm24 mm26 mm210 mm2≥25Ah ≥12Ah

5-12V 1 6 mm210 mm216 mm225 mm2≥100Ah ≥50Ah

5-24V 1 4 mm26 mm210 mm216 mm2≥50Ah ≥25Ah

10-12V 1 16 mm225 mm235 mm250 mm2≥160Ah ≥90Ah

10-24V 1 6 mm210 mm216 mm225 mm2≥80Ah ≥50Ah

10-48V 2 6 mm210 mm216 mm225 mm2≥25Ah ≥25Ah

15-12V 2 10 mm216 mm235 mm250 mm2≥250Ah ≥100Ah

15-24V 2 6 mm210 mm216 mm225 mm2≥120Ah ≥70Ah

15-48V 2 6 mm210 mm216 mm225 mm2≥80Ah ≥35Ah

20-12V 2 16 mm225 mm250 mm250 mm2≥320Ah ≥180Ah

20-24V 2 10 mm216 mm225 mm235 mm2≥160Ah ≥90Ah

20-48V 2 10 mm216 mm225 mm235 mm2≥80Ah ≥50Ah

25-12V 2 25 mm235 mm250 mm250 mm2≥400Ah ≥200Ah

25-24V 2 10 mm216 mm225 mm235 mm2≥200Ah ≥100Ah

25-48V 2 10 mm216 mm225 mm235 mm2≥100Ah ≥50Ah

30-12V 2 25 mm235 mm250 mm250 mm2≥480Ah ≥250Ah

30-24V 2 10 mm216 mm225 mm235 mm2≥240Ah ≥125Ah

30-48V 2 10 mm216 mm225 mm235 mm2≥120Ah ≥70Ah

Cables and batteries are not included!

Please note the capacity! An under-

run of the recommended battery capa-

city can cause a loss of performance or

serious use restrictions as a result of vol-

tage drops.

Please respect a sucient ventila-

tion! The inverter produces heat loss.

The device is equipped with a thermal

overload protection. An insucient ven-

tilation can aect the function of the in-

verter, because the inverter can shut it-

self down for safety reasons. Please fol-

low the appropriate installation advice

below.

The inverter should not be used in ve-

hicles, in which the +pole is connected

to the chassis!

Please mind the input voltage! The

inverter should only be connected to vol-

tage sources which correspond to techni-

cal data. If connected to a higher volta-

ge source the fuse can immediately blow

and damage the inverter.

Please note the maximum power of

the consumer devices! For currents

>15 A consumer devices have to be con-

WWW.INSBUD.NET

nected directly to the terminal for direct

connections.

Idle current consumption! When the

inverter is not in use, turn it o with

the main switch. Otherwise, idle current

consumption will take place according

to this table and deep discharge may da-

mage your battery (if there is no BMS).

Please mind the starting current!

Keep in mind that inductive devices

(for example power drills or refrigera-

tors etc.) often need a 3–10 times higher

power at the beginning than indicated

on the descriptive type plate. The ma-

ximum power of this short period should

not surpass the maximum surge power

of the inverter.

Note the acoustic signal! In case of

overload an acoustic signal will sound. If

the consumer devices power is not redu-

ced to the maximal continuous output,

the inverter will shut down automatical-

ly.

Output power losses because of he-

at. An ambient temperature over 40°C

(for ex. due to heat at the installation si-

te or direct sunlight) can lower the spe-

cied output and eciency.

Restrictions on Use. The following

persons should use this product only un-

der the supervision of another responsi-

ble person:

Persons with limited physical apti-

tude.

Persons with limited mental apti-

tude.

Persons with limited sensory apti-

tude.

Use the device only in accordance with

its designated use.

Store the device out of the reach of chil-

dren.

When the inverter isn’t in use for longer

periods of time, please follow this advice

to protect your battery from discharge:

Disconnect all consumers from the

inverter.

Disconnect the battery from the

inverter by using a disconnector or

by disconnecting the cables.

If the battery isn’t completely di-

sconnected, a minimal current con-

sumption by the inverter will con-

tinue to take place.

If two sets of battery cables are recom-

mended, both sets with an appropriate

cable thickness must be installed. Failu-

re to do so can easily lead to overheating

of the overloaded cables and connection

points and cause a dangerous cable re.

The IB-INV-CSI inverter are general-

ly build for so called „O-Grid”-Systems

and should only be used autonomously.

Do not connect the inverter output (soc-

ket) with an other voltage source. Di-

sregarding this advice is life threatening

and will destroy the inverter immedia-

tely.

Risk of electric shocks! The device is

equipped with security features to pre-

vent dangerous electric shocks. Howe-

ver, in order to ensure the highest possi-

ble safety during operation, it is impe-

rative that the inverter’s ground connec-

tion be connected to a protective earth

in any case.

Maintenance and repairs may only be

performed by properly trained person-

nel.

WWW.INSBUD.NET

The installation of this equipment may

only be performed by trained and autho-

rized personnel and in compliance with

all applicable safety regulations and gu-

idelines.

Especially when used on a boat an in-

correct installation can lead to corrosion

damage. Therefore the installation sho-

uld be performed by trained boat elec-

tricians.

Important mounting instructions!

To reduce the risk of re, injuries and

electronic shocks, please note the follo-

wing instructions:

The device can be installed hori-

zontally or vertically.

Do not cover the ventilation slits

and ensure adequate ventilation.

The installation site of the inver-

ter has to be well ventilated.

Install the inverter only on solid

mounting surfaces.

Do not pull the cable.

Do not install near heat sources or

in direct sunlight.

Avoid dust, humidity and amma-

ble or caustic substances near the

inverter.

The inverter heats up during

operation, keep away from heat-

sensitive materials.

Do not drop the inverter and avoid

shocks.

Do not place any objects on top of

the inverter.

Do not open the device.

Only use dry wipes or compressed

air for cleaning. Switch o the in-

verter before cleaning.

Switch of the inverter before all

kinds of work.

The damaged inverter should be

taken out of service.

WWW.INSBUD.NET

Connecting an inverter and a battery with 2 sets of cables:

Inverter

Battery

4Overview

This manual suits for next models

Table of contents

Popular Inverter manuals by other brands

Fourgroup

Fourgroup Easy use and Programming Handbook

Velleman

Velleman PI300M user manual

Sungrow

Sungrow SG350HX-US user manual

WilTec

WilTec 61897 Operation manual

SMA

SMA SUNNY BOY STORAGE 2.5 Quick reference guide

Simplicity

Simplicity LANDLORD 316 product manual

Santak

Santak SMAX 3000 user manual

ATON

ATON RA.Store-3 user manual

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ operating instructions

Tektronix

Tektronix CFG250 Operator's manual

Champion

Champion 200989 Operator's manual

Vanner

Vanner 20-500 Series owner's manual

GE GEP user manual

Astrel Group

Astrel Group Power Reducer Installation and instruction manual

MULTIQUIP

MULTIQUIP GDP-5H Operation and parts manual

GoWISE

GoWISE PS1007 user manual

Promate

Promate PM13500D ES Operator's manual

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM user manual